[HECnet] HECnet GRE Tunnels...

This is the relevant part of my config. Even though I've been using this config for several years, let me know if anything looks out of place: version 12.2 service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname hecgw1 ! enable secret 5 XXX ! ip subnet-zero no ip icmp rate-limit unreachable ip cef ! ! ip tcp synwait-time 5 no ip domain lookup ! ! decnet routing iv-prime 61.200 decnet node-type routing-iv ! ! ! ! ! ! ! ! ! ! ! ! ! bridge crb ! ! ! interface Tunnel0 no ip address decnet cost 20 tunnel source FastEthernet0/0 tunnel destination 50.73.179.1 tunnel path-mtu-discovery bridge-group 1 bridge-group 1 spanning-disabled ! interface FastEthernet0/0 ip address x.x.x.x 255.255.255.0 duplex full speed auto decnet cost 20 bridge-group 1 bridge-group 1 input-lsap-list 202 bridge-group 1 input-type-list 201 bridge-group 1 spanning-disabled ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! ip classless ip route 0.0.0.0 0.0.0.0 x.x.x.x no ip http server ! ! access-list 201 permit 0x6003 0x0000 access-list 201 permit 0x6004 0x0000 access-list 202 deny 0x0000 0xFFFF ! ! ! bridge 1 protocol ieee bridge 1 route decnet bridge 1 route ip call rsvp-sync ! ! mgcp profile default ! dial-peer cor custom ! ! ! ! gatekeeper shutdown ! ! ...(line settings omitted) Thanks. On Mon, Nov 19, 2018 at 9:02 PM Mark Abene <phiber at phiber.com> wrote: