[HECnet] ANF10 network

It was not full mesh. ANF10 has routing with metrics like DECnet and RDH even wrote a driver to talk over Ethernet between KL's. ODEN at QZ 1099 KL10D external memory, SMP 3 DN87S hugin, munin, balder that had terminal lines Nadja at KTH 2020 Aurora at SU 2020 Filip at FOA3 1091 one dn87s filippa Kicki at me 1077 3*KI10 2 dn87 on DL10 Jenjen Trasel Katia at KTH 1050 1*KA10 1 dn87 on DL10 (dont-remember name) Janus at QZ DN200 acting as X.25/X.29 GW (could speak ANF10 over X25 to remote sites...) I don't remember the exact config but the front end worked if the host on DL10 or DTE20 went down, and somehow it was layed out so that hugin-munin-balder could talk over sync lines when Oden was down and they where kind of in the "center". So if we could boot a simulted DNxxx node with simulated sync interfaces on it and the DTE/DL10 is down, we might have a ANF10 router. DN200's booted over the sync line. Kicki talked to Nadja and Munin on 19.2 Nadja talked to Hygin on 19.2 Minin talked to Filippa Aurora talked to Balder Janus talked to Balder and Minin One of the cool things is that you can do "set host" without logging in, so it looked like a "cloud" with terminal lines and a bunch of hosts you could chose from. The front end/dn87 was configured to what "host" to connect each line to when the line became active, and if that host was down it picked one that could talk to you and sent you there. ANF10 routing messages has a capabilities field, it tells what it can do. -p