7 May
2013
7 May
'13
8:50 p.m.
On 7 May 2013, at 19:46, Johnny Billquist <bqt at softjar.se> wrote:
Two things comes to mind - the fact that the LED is working shows that the basic system is
just fine. If something is broken, it would only be port 1 in this case.
However, if you have a terminal connected to port 1, and the terminal have modem
signalling enabled, it will not print anything. The DS does not activate the modem signals
until it has booted. But there are data on the data lines before that...
Johnny
It's doing the spinning LED now. I'll check the terminal settings and reboot it.
sampsa