31 Mar
2020
31 Mar
'20
5:59 a.m.
I haven't tried burning but I used p7z through File Roller on a Linux Mint
system. I have only used it as an image on Simh. I am not at my computer
tonight but if you need it tomorrow I can get you a checksum on the
unzipped image.
Ray
On Mon, Mar 30, 2020, 11:53 PM John H. Reinhardt <
johnhreinhardt at thereinhardts.org> wrote:
On 3/30/2020 10:46 PM, Ray Jewhurst wrote:
I have tried both the VAXHaven and WinWorldPC
copies of 5.5-2H4 and I
tend to agree that the VAXHaven one is corrupted (at least
it's never
worked for me). But the WinWorldPC copy works great. Also, corrupt is the
MicroVMS 4.7 TK50 image on VAXHaven.
Ray
The file I got from WinWorldPC came as a ".7z" archive. and I unpacked it
with "TheUnarchiver". Does that match what you did? The file I get from
that always gets the "Could not burn "VMS 552h4 VAX.iso". The disk image
is
invalid." error from the Mac disk burn software.
Did you do something differently?
Thanks.
John H. Reinhardt
On Mon, Mar 30, 2020, 11:34 PM John H. Reinhardt <
johnhreinhardt at
thereinhardts.org <mailto:johnhreinhardt at thereinhardts.org>>
wrote:
On 3/30/2020 8:44 PM, Supratim Sanyal wrote:
> On 3/30/20 6:14 PM, G. wrote:
>
>> On Mon, 30 Mar 2020 17:51:21 -0400, Supratim Sanyal wrote:
>>
>>> What is the recommended way to recover from "FILNOTCNTG"
error?
>> Boot the system in some other way (cluster satellite, CD-ROM,
etc.)
and
>> check that SYSBOOT.EXE is
contiguous:
>>
> I hooked up the RRD42, burnt the OVMS-7.3 ISO image on a CD-R, and
tried
to boot dka400, didn't work. The internet is flush with discussions
about "special format" CD-ROM, ODS vs ISO, 2048 byte vs 512 byte blocks,
etc.
>
> My MacBook refuses to brun the VMS 5.5-2H4 ISO from VAXHAVEN
("invalid disk image"). So basically I have to research and find a way to
burn a CD-ROM in the necessary format that will boot the MicroVAX into DCL
so that I can repair the CONTIGUOUS issue on DKA100.
>
> I am sure lots of people here have done this - any tips welcome
while I
am trolling the internet.
The file downloaded from HPE for OpenVMS V7.3 is a Backup saveset
and
can't be written directly to a CD to create a bootable disk. My disk
image I got from an actual OpenVMS VAX V7.3 CD. Assuming you have a disk
image you can use then you can follow this. It's very simple on the Mac
1) Navigate in Finder to the CD image file
2) Right click on the file, should bring up a menu list and you
choose
'Burn "xxxxxxx" to Disc...'
3) In the dialog choose the slowest burn speed. I don't have any
proof,
but I've always gotten better result with slower speeds. I typically
chose the 4x speed.
4) Choose "Verify" just for safety. I also choose "Eject on
finish"
since the Mac can't mount the OpenVMS CD file system anyway.
5) Start the CD burn
The CD-R that I use are 700MB 80 minute ones. The brand is
Philips. Not sure
how much difference that makes. It's been along time
since I did any testing. I have a large supply of the current ones so I
haven't needed to shop in a few years.
Unless there is corruption in the disk image you use, that should be
all you
have to do. Windows people have a little more, they usually need a
special program but the Mac's CD burn program works just fine for OpenVMS
images.
When writing the CD, you don't need to worry about the 512 vs 2048
byte
block problem. That's only for the CD drive hooked to the VAX. An
RRD42 has the appropriate block size. The only thing I don't know is if an
RRD42 is too early of a drive to handle a CD-R or not. My oldest DEC drive
is an RRD43 in my InfoTower. My MicroVAX 3100 has a Toshiba XM-5701A which
is a RRD45 or RRD46 equivalent. My InfoTower is not set up at the moment
but the MicroVAX can read the burnt disk without problem.
So I just wrote a V7.3 CD from image and it worked okay. I
downloaded the
V5.5-H4 image from VAXHaven and I get an "unrecognizable
format" message from the Mac when selecting the "AG-PXL1A-RE.iso" to
burn.
I examined it in DiskImageMounter but it can't figure out the format
either. It's possible the image is corrupted on the VAXHaven site. It's
also possible that DEC used an internal format on the CD that the current
software doesn't know about. Some combination of ISO and Joliet, perhaps.
So next I downloaded the OpenVMS VAX V6.1 image from VAXHaven
(AG-PXKUC-RE.ISO) and it burned okay. I can mount it in my MicroVAX and
read the save sets off of it.
II have another copy of V5.5-2H4 that I got from www.winworldpc.com
<http://www.winworldpc.com> at the hint of one of these message boards.
Maybe Classic Comp. But it gives the same "Could not burn "VMS 552h4
VAX.iso". The disk image is invalid." error so I'm betting it's
probably a
copy of the VAXHaven image. I got a V5.5-2 from there and I can burn
that. More and more I think the VAXHaven V5.5-2H4 image may be corrupted.
--
John H. Reinhardt
--
John H. Reinhardt
PRRT&HS #8909
C&O HS #11530
N-Trak #7566