[HECnet] Sunlink DNA

On Thu, Sep 20, 2018 at 5:13 PM, Ray Jewhurst <raywjewhurst at gmail.com> wrote: Mark, I followed your instructions to a "T" and it built fine but I got the following errors on the install. /usr/bin/x86_64-linux-gnu-ld: cannot find -ltme-ieee754 collect2: error: ld returned 1 exit status libtool: install: error: relink `tme_ic_m68k.la' with the above command before installing it Makefile:312: recipe for target 'install-pkglibLTLIBRARIES' failed make[4]: *** [install-pkglibLTLIBRARIES] Error 1 make[4]: Leaving directory '/home/ray/tme-0.8/ic/m68k' Makefile:470: recipe for target 'install-am' failed make[3]: *** [install-am] Error 2 make[3]: Leaving directory '/home/ray/tme-0.8/ic/m68k' Makefile:464: recipe for target 'install' failed make[2]: *** [install] Error 2 make[2]: Leaving directory '/home/ray/tme-0.8/ic/m68k' Makefile:612: recipe for target 'install-recursive' failed make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory '/home/ray/tme-0.8/ic' Makefile:315: recipe for target 'install-recursive' failed make: *** [install-recursive] Error 1 I also am also running Ubuntu 18.04. Thanks in advance, Ray On Thu, Sep 20, 2018 at 5:02 PM, Mark Abene <phiber at phiber.com> wrote: > I posted this message yesterday, but for some reason people are telling me it never went to the list. > I removed the photos I originally attached and am sending it again. > > -Mark > > ---------- Forwarded message ---------- > From: Mark Abene <phiber at phiber.com> > Date: Wed, Sep 19, 2018 at 2:58 PM > Subject: Re: [HECnet] Sunlink DNA > To: hecnet at update.uu.se > > > To everyone who asked, I built TME last night on Ubuntu 18.04 on two different systems, and installed NetBSD 1.6.2 on a sun3/160 instance. > It's working very nicely, minus networking; bear in mind that TME was originally written to run on a NetBSD host (it's in the pkg collection), and makes use of BPF to implement networking (I seem to remember it also working on FreeBSD). Linux does have a bpf compatibility interface, so I'll see if it can be made to work and follow up with you all. That said, grab TME here: https://people.csail.mit.edu/fredette/tme/tme-0.8.tar.gz > That's the home site, there's lots of info on the emulator https://people.csail.mit.edu/fredette/tme/ > There's also this site, specifically about installing SunOS 4.1.1: http://www.abiyo.net/retrocomputing/installingsunos411tosun3emulatedintme08… > DON'T follow those build instructions, they're incredibly old and will get you nowhere fast. :) > > Here are my steps: > Make sure you have the gtk-2.0 and glib2.0 dev packages installed. Then... > mkdir $HOME/tme > cd $HOME/tme > tar -zxvf your_download_dir/tme-0.8.tar.gz > cd tme-0.8 > vi libtme/module.c (comment out line 93 "LTDL_SET_PRELOADED_SYMBOLS();", it's no longer needed) and save. > ./configure --prefix=$HOME/tme --disable-warnings 'LIBS=-lglib-2.0 -lgtk-x11-2.0 -lX11' > export LTDL_LIBRARY_PATH=$HOME/tme/lib (or "setenv LTDL_LIBRARY_PATH $HOME/tme/lib" for csh/tcsh) > make > make install > > If everything built and installed without errors, you'll have the install tree in $HOME/tme. From here you can follow the various instructions on the original site above for installing NetBSD, etc. > > If you ran into any errors either building, installing, or running, just drop me a note, I'd be happy to help! > > P.S.: I've attached some photos of it booting up! > P.P.S: You'll notice it seg fault when you exit tmesh. The original does this too. The author even comments about how there's no "quit" command. > > Regards, > Mark > > > >> On Tue, Sep 18, 2018 at 6:35 PM, Dave McGuire <mcguire at neurotica.com> wrote: >> >> Thanks Mark! >> >> -Dave >> >> On 09/18/2018 08:59 PM, Mark Abene wrote: >> > Absolutely. I'll dig it out after dinner later tonight. >> > >> > -Mark >> > >> > >> > On Tue, Sep 18, 2018 at 5:44 PM, Dave McGuire <mcguire at neurotica.com >> > <mailto:mcguire at neurotica.com>> wrote: >> > >> > On 09/18/2018 08:12 PM, Mark Abene wrote: >> > > The TME emulator works fine on Ubuntu with very minor massaging. I don't >> > > recall having to do anything extremely out of the ordinary. >> > > For me the fun was in emulating a Sun 3/80 I used to have. If you like, >> > > I can dig it up my TME install. Haven't used it in a while. >> > >> > If you can find any notes that you my have taken on what it took to >> > get it running, I'd very much appreciate that. I hacked on it for a bit >> > earlier this year, but ran out of time and eventually gave up. >> > >> > -Dave >> > >> > -- >> > Dave McGuire, AK4HZ >> > New Kensington, PA >> > >> > >> >> >> -- >> Dave McGuire, AK4HZ >> New Kensington, PA > >