[HECnet] Cisco Config Tool Update

On 4 Feb 2013, at 16:12, Ian McLaughlin <ian at platinum.net> wrote: Yay. Area 9 tunnel is up: Yup. It's still suffering local packet loss though... hub#sh dec nei Net Node Interface MAC address Flags 0 9.1023 Tunnel52 0000.0000.0000 A 0 52.1023 Tunnel50 0000.0000.0000 A 0 42.1023 Tunnel0 0000.0000.0000 V A hub#ping 9.1023 Type escape sequence to abort. Sending 5, 100-byte DECnet echos to atg 0 area.node 9.1023, timeout is 5 seconds : !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 84/92/120 ms Ian On 2013-02-04, at 1:01 PM, Cory Smelosky <b4 at gewt.net> wrote: On 4 Feb 2013, at 15:46, Cory Smelosky <b4 at gewt.net> wrote: On 4 Feb 2013, at 15:45, Brian Hechinger <wonko at 4amlunch.net> wrote: On 2/4/2013 2:58 PM, Cory Smelosky wrote: Looks like Brian has to update his firewall to reflect my new IP.;) This is not it? 75.49.13.19 Interesting, that is the correct one. The VM must've been glitching then. Updating the host VM now to see if I can resolve the 40-60% packet loss issue --- 10.10.10.7 ping statistics --- 50 packets transmitted, 40 packets received, 20.0% packet loss round-trip min/avg/max/stddev = 1.605/13.890/62.054/16.173 ms This was fine before the move to VMWare... -- Cory Smelosky http://gewt.net/ Personal stuff! http://gimme-sympathy.org/ My permanently-a-work-in-progress pet project. -- Cory Smelosky http://gewt.net/ Personal stuff! http://gimme-sympathy.org/ My permanently-a-work-in-progress pet project. --- Filter service subscribers can train this email as spam or not-spam here: http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=03EC4DFC6F0E11E29… -- Cory Smelosky http://gewt.net/ Personal stuff! http://gimme-sympathy.org/ My permanently-a-work-in-progress pet project.