26 Oct
2025
26 Oct
'25
6:40 a.m.
On Sun, Oct 26, 2025 at 3:00 PM Dave McGuire <mcguire(a)neurotica.com> wrote:
This runs on a Z280RC cpu / quad serial port RC2014 system. Most of the
time it's running CP/M Plus nowadays - but when I get a round tuit I'll get
back into porting things to Hector Peraza'a RSX280.
Tony
On 10/25/25 23:46, Tony Nicholson wrote:
It is indeed a eZ80F91 evaluation board, set to run CP/M 2.2 with shared
drives
over Ethernet. I can connect to it from a VT220 or from other systems using
Kermit/XMODEM via LAT (or the Telnet gateway on the Lantronix).
EZ80_CONSOLE Available eZ80 console
via GECKO
Separately, what is this, if I may ask? I did several commercial
designs with eZ80 microcontrollers (specifically eZ80F91) many years
ago. I liked them a lot, but Zilog's toolchain wasn't very good, and
the whole ecosystem was displaced (for my work anyway) by ARM (now ARM
and RISC-V) with GCC. Much better overall but lacks that sexy "Z" on
the package.. ;)
RSX280
Available RSX280 V6.15 via GECKO
I have an RSX280 system as well, but I've not yet powered it up due
to lack of time.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
_______________________________________________
HECnet mailing list -- hecnet(a)lists.dfupdate.se
To unsubscribe send an email to hecnet-leave(a)lists.dfupdate.se
--
Tony Nicholson <tony.nicholson(a)computer.org>