[HECnet] DECnet Area Router question

On Fri, 4 Jun 2010, Mark Wickens wrote: My power consumption page might help a bit: http://lakesdev.blogspot.com/2008/09/power-consumption-of-computers-and.html The VAXstation 4000/VLC takes the lowest power but at about 6 VUPS it is quite slow. The 4000/60 and 4000/90 (BUBBLE) take about 100 Watts, which is twice as much, but are *so* much more usable. In terms of alpha, the lowest power I've found so far is the Alphaserver 300 4/266 (TIGER) which clocks at about 100 watts. The Alphaserver 1000A runs at about 180 watts which is pretty good given the expansion possibilities (it has a BA356 8 drive enclosure built in). I'm currently running a BUBBLE and TIGER 24/7 which is a VAX and Alpha node for 200 watts total. Mark. My VAXstation 4000/VLC has a dead power supply. Plus the BA353 I was using it on it has a dead powersupply. Those two bits originally made up PDXVAX. The current PDXVAX hardware is a VAXstation 4000/60 and a BA350 (with 1 2GB drive). My VAXstation 4000/90 has issues, but I forget what. MONK is currently a XP1000 with three SCSI buses. The Narrow SCSI drives a TLZ06, the FWD-SCSI drives a DLT7000 drive, and then the U2W-SCSI has 2 JBOD boxes with 3 36GB 10k drives each. I'm thinking something like an AlphaStation 200 4/233 or even DEC 3000/133 with a BA350 and 2-3 4GB drives. That would definitely be a bit more affordable power wise than MONK and PDXVAX combined. In fact less than 10 years ago, that was the hardware MONK was running on. Oh, and yes, I have a preference for external HD's. I have a lot of 4GB SBB's for BA350's and a lot of SCA SCSI HD's, but very few drives I can use internally without opening up SBB's. Zane