[HECnet] My newest toy

Peter Lothberg <roll at Stupi.SE> writes: Are you sure? I'm never sure.. I booted Linux (old) on it and it says: Linux version 2.6.18-5-alpha-generic (Debian 2.6.18.dfsg.1-17) (dannf at debian.org ) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 Sat Dec 22 20:4 2:39 UTC 2007 Booting GENERIC on Tsunami variation Clipper using machine vector Clipper from S RM Major Options: MAGIC_SYSRQ Command line: ro root=/dev/hda3 memcluster 0, usage 1, start 0, end 256 memcluster 1, usage 0, start 256, end 130989 memcluster 2, usage 1, start 130989, end 131072 memcluster 3, usage 0, start 131072, end 262142 memcluster 4, usage 1, start 262142, end 262144 freeing pages 256:2048 freeing pages 3064:130989 freeing pages 131072:262142 reserving pages 3064:3068 Initial ramdisk at: 0xfffffc007f8fa000 (6401328 bytes) 4096K Bcache detected; load hit latency 24 cycles, load miss latency 173 cycles On node 0 totalpages: 262142 DMA zone: 262142 pages, LIFO batch:15 Built 1 zonelists. Total pages: 262142 Kernel command line: ro root=/dev/hda3 PID hash table entries: 4096 (order: 12, 32768 bytes) Using epoch = 2000 Setting RTC_FREQ to 1024 Hz (27) Console: colour dummy device 80x25 Dentry cache hash table entries: 262144 (order: 8, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 7, 1048576 bytes) Memory: 2059800k/2097136k available (1904k kernel code, 33944k reserved, 357k da ta, 296k init) Calibrating delay loop... 1661.52 BogoMIPS (lpj=811008) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 checking if image is initramfs... it is Freeing initrd memory: 6251k freed NET: Registered protocol family 16 EISA bus registered PCI: Firmware left 0000:00:04.0 e100 interrupts enabled, disabling PCI quirk: region 7e20-7e3f claimed by ali7101 SMB pci: enabling save/restore of SRM state Linux Plug and Play Support v0.97 (c) Adam Belay NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 6, 524288 bytes) TCP established hash table entries: 262144 (order: 8, 2097152 bytes) TCP bind hash table entries: 65536 (order: 6, 524288 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 8192 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Activating ISA DMA hang workarounds. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 Freeing unused kernel memory: 296k freed atkbd.c: keyboard reset failed on isa0060/serio1 atkbd.c: keyboard reset failed on isa0060/serio0 SCSI subsystem initialized sym0: <1010-66> rev 0x1 at pci 0000:00:03.0 irq 32 e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation sym0: No NVRAM, ID 7, Fast-80, LVD, parity checking sym0: SCSI BUS has been reset. scsi0 : sym-2.2.3 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx e100: eth0: e100_probe: addr 0x9022000, irq 36, MAC addr 00:02:56:00:12:AC e100: eth1: e100_probe: addr 0x209200000, irq 48, MAC addr 00:02:56:00:12:AD ALI15X3: IDE controller at PCI slot 0000:00:10.0 ALI15X3: chipset revision 194 ALI15X3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x8440-0x8447, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x8448-0x844f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: ST3250823A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hda: max request size: 128KiB hda: cannot use LBA48 DMA - PIO mode will be used for accessing sectors > 268435 456 hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(66) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 hda5 hda6 hda7 Couldn't have just type 'SHOW MEMORY' at the dead Sergeant? -- VAXman- A Bored Certified VMS Kernel Mode Hacker VAXman(at)TMESIS(dot)ORG Well I speak to machines with the voice of humanity.