- HECnet - lists @ Update

by gregg.drwho8＠gmail.com

On Sat, Jul 17, 2010 at 11:31 AM, Sampsa Laine <sampsa at mac.com> wrote: Tiger seems to be down, is this correct? I'd be more than happy to pull it down using FTP/HTTP... Sampsa On 17 Jul 2010, at 08:33, Mark Wickens wrote: On Sat, 2010-07-17 at 00:40 +0100, Sampsa Laine wrote: I remember people discussing running DECNET on Tru64 here a while back, is there a DECNET IV package available for it? Anyone have a copy? Sampsa Yes, I've got it here - I'll put the packages on tiger in the anonymous ftp account. Hello! Perhaps the cat is asleep? Afterall they are supposed to spend most of their days asleep......... ----- Gregg C Levine gregg.drwho8 at gmail.com "This signature fought the Time Wars, time and again."

14 years, 12 months

1
0
0 0

DECNET Phase IV for Tru 64

by sampsa＠mac.com

Tiger seems to be down, is this correct? I'd be more than happy to pull it down using FTP/HTTP... Sampsa On 17 Jul 2010, at 08:33, Mark Wickens wrote: On Sat, 2010-07-17 at 00:40 +0100, Sampsa Laine wrote: I remember people discussing running DECNET on Tru64 here a while back, is there a DECNET IV package available for it? Anyone have a copy? Sampsa Yes, I've got it here - I'll put the packages on tiger in the anonymous ftp account.

14 years, 12 months

1
0
0 0

DECNET Phase IV for Tru 64

by sampsa＠mac.com

Just a side note: I discovered that with a bit of jiggling and poking the PAKGEN I have that does VMS PAKs works for Tru64 too. Just in case anyone has lost their PAK.. On 17 Jul 2010, at 11:04, H Vlems wrote: A pity because despite its elegance and well thought out design DECnet-Plus (or phase V or DECnet OSI) is a lot moredifficult to maintain and manage than phase IV. I have the appropriate DECnet versions for the three Tru64 versions that I run. My experience with Tru64 is very limited and I do not feel an urge to get more confused by running versions even older than V5.0... Hans -----Oorspronkelijk bericht----- Van: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] Namens Mark Wickens Verzonden: zaterdag, juli 2010 10:48 Aan: hecnet at Update.UU.SE Onderwerp: Re: [HECnet] DECNET Phase IV for Tru 64 On Sat, 2010-07-17 at 08:33 +0100, Mark Wickens wrote: On Sat, 2010-07-17 at 00:40 +0100, Sampsa Laine wrote: I remember people discussing running DECNET on Tru64 here a while back, is there a DECNET IV package available for it? Anyone have a copy? Sampsa Yes, I've got it here - I'll put the packages on tiger in the anonymous ftp account. Apologies, It is decnet+, the version I use is 4.0B on 4.0G - I didn't have any problems configuring it up for use with HECnet however. I can check for a more recent version if you don't have one. Mark. Geen virus gevonden in het binnenkomende-bericht. Gecontroleerd door AVG - www.avg.com Versie: 9.0.839 / Virusdatabase: 271.1.1/3009 - datum van uitgifte: 07/16/10 21:19:00

14 years, 12 months

1
0
0 0

DECNET Phase IV for Tru 64

by hvlems＠zonnet.nl

A pity because despite its elegance and well thought out design DECnet-Plus (or phase V or DECnet OSI) is a lot moredifficult to maintain and manage than phase IV. I have the appropriate DECnet versions for the three Tru64 versions that I run. My experience with Tru64 is very limited and I do not feel an urge to get more confused by running versions even older than V5.0... Hans -----Oorspronkelijk bericht----- Van: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] Namens Mark Wickens Verzonden: zaterdag, juli 2010 10:48 Aan: hecnet at Update.UU.SE Onderwerp: Re: [HECnet] DECNET Phase IV for Tru 64 On Sat, 2010-07-17 at 08:33 +0100, Mark Wickens wrote: On Sat, 2010-07-17 at 00:40 +0100, Sampsa Laine wrote: I remember people discussing running DECNET on Tru64 here a while back, is there a DECNET IV package available for it? Anyone have a copy? Sampsa Yes, I've got it here - I'll put the packages on tiger in the anonymous ftp account. Apologies, It is decnet+, the version I use is 4.0B on 4.0G - I didn't have any problems configuring it up for use with HECnet however. I can check for a more recent version if you don't have one. Mark. Geen virus gevonden in het binnenkomende-bericht. Gecontroleerd door AVG - www.avg.com Versie: 9.0.839 / Virusdatabase: 271.1.1/3009 - datum van uitgifte: 07/16/10 21:19:00

14 years, 12 months

1
0
0 0

DECNET Phase IV for Tru 64

by mark＠wickensonline.co.uk

On Sat, 2010-07-17 at 08:33 +0100, Mark Wickens wrote: On Sat, 2010-07-17 at 00:40 +0100, Sampsa Laine wrote: I remember people discussing running DECNET on Tru64 here a while back, is there a DECNET IV package available for it? Anyone have a copy? Sampsa Yes, I've got it here - I'll put the packages on tiger in the anonymous ftp account. Apologies, It is decnet+, the version I use is 4.0B on 4.0G - I didn't have any problems configuring it up for use with HECnet however. I can check for a more recent version if you don't have one. Mark.

14 years, 12 months

1
0
0 0

DECNET Phase IV for Tru 64

by mark＠wickensonline.co.uk

On Sat, 2010-07-17 at 10:07 +0200, H Vlems wrote: On what version(s) of Tru64 does it run? The reason for asking this is the phase V kit where each version matches one specific version of Tru64. If it runs on one of these: V5.0, V5.1A or V5.1B then I'm very much interested in it. Hans I have tried this version for V4.0G, however I have the SPL for 5.1 so there should be a version on that for V5.1+ (well, you would have thought so, unless they only started shipping DNV from that point Mark. -----Oorspronkelijk bericht----- Van: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] Namens Mark Wickens Verzonden: zaterdag, juli 2010 9:33 Aan: hecnet at Update.UU.SE Onderwerp: Re: [HECnet] DECNET Phase IV for Tru 64 On Sat, 2010-07-17 at 00:40 +0100, Sampsa Laine wrote: I remember people discussing running DECNET on Tru64 here a while back, is there a DECNET IV package available for it? Anyone have a copy? Sampsa Yes, I've got it here - I'll put the packages on tiger in the anonymous ftp account. Geen virus gevonden in het binnenkomende-bericht. Gecontroleerd door AVG - www.avg.com Versie: 9.0.839 / Virusdatabase: 271.1.1/3009 - datum van uitgifte: 07/16/10 08:35:00

14 years, 12 months

1
0
0 0

FreeAXP Alpha Emulator

by hvlems＠zonnet.nl

You're quite right Kari about the Multia. I bought one with 40 MB memory and VMS would boot but crash all by itself within 20 minutes on an otherwise idle system. The memory was replaced with 256 MB memory and the Multia was more useful afterwards. The heat problem remains though and adding all that memory didn't exactly reduce the inside temperature. So it's a winter-only system. :) Hans -----Oorspronkelijk bericht----- Van: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] Namens Kari Uusim ki Verzonden: vrijdag, juli 2010 20:42 Aan: hecnet at Update.UU.SE Onderwerp: Re: [HECnet] FreeAXP Alpha Emulator On 16.7.2010 19:57, Zane H. Healy wrote: On Fri, 16 Jul 2010, Sampsa Laine wrote: Guys, just saw this on openvmshobbyist.com: FreeAXP http://www.migrationspecialties.com/FreeAXP.html#Components It emulates a AlphaServer 400 with up to 7 drives and 128 MB of RAM. Runs on Windows though :( I'm currently rolling out a test system to see how well it behaves on Win2K3 Server. Sampsa Have you ever run an Alpha with only 128MB of RAM? That is the absolute bare minimum I'd run 7.2 in, and it wasn't fun. I really wish they'd allow between 192MB and 256MB, as at that point it starts being usable. Of course I'd also like a Linux version. :-) Zane . I have. Even with 64MB. ;-) It was a DEC3000-300X back in 1993 with AXPVMS V1.5 and also with OSF/1 V2.x and 3.0. I have also tested a Multia with 64MB and VMS V7.3. It worked, but was really slow. I wasn't expecting much more than bootability. The Multia is slow (EV4/166MHz or EV4/233MHz) and 64MB is the absolute minimum for AXPVMS. Kari Geen virus gevonden in het binnenkomende-bericht. Gecontroleerd door AVG - www.avg.com Versie: 9.0.839 / Virusdatabase: 271.1.1/3009 - datum van uitgifte: 07/16/10 08:35:00

14 years, 12 months

1
0
0 0

DECNET Phase IV for Tru 64

by hvlems＠zonnet.nl

On what version(s) of Tru64 does it run? The reason for asking this is the phase V kit where each version matches one specific version of Tru64. If it runs on one of these: V5.0, V5.1A or V5.1B then I'm very much interested in it. Hans -----Oorspronkelijk bericht----- Van: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] Namens Mark Wickens Verzonden: zaterdag, juli 2010 9:33 Aan: hecnet at Update.UU.SE Onderwerp: Re: [HECnet] DECNET Phase IV for Tru 64 On Sat, 2010-07-17 at 00:40 +0100, Sampsa Laine wrote: I remember people discussing running DECNET on Tru64 here a while back, is there a DECNET IV package available for it? Anyone have a copy? Sampsa Yes, I've got it here - I'll put the packages on tiger in the anonymous ftp account. Geen virus gevonden in het binnenkomende-bericht. Gecontroleerd door AVG - www.avg.com Versie: 9.0.839 / Virusdatabase: 271.1.1/3009 - datum van uitgifte: 07/16/10 08:35:00

14 years, 12 months

1
0
0 0

DECNET Phase IV for Tru 64

by mark＠wickensonline.co.uk

On Sat, 2010-07-17 at 00:40 +0100, Sampsa Laine wrote: I remember people discussing running DECNET on Tru64 here a while back, is there a DECNET IV package available for it? Anyone have a copy? Sampsa Yes, I've got it here - I'll put the packages on tiger in the anonymous ftp account.

14 years, 12 months

1
0
0 0

A guide to "content" on HECNET?

by jferraro＠gmail.com

Like most everyone, I'm sure, I'll have MUD's / games online... intend to TRY to make a c64 / retro file swap available... be interesting to try to pull some of the c64 / atari / whatever folks onto a bbs or something... dunno... Also plan to host a mail gateway once we start moving in that direction... Good idea... On Fri, Jul 16, 2010 at 8:35 PM, Sampsa Laine <sampsa at mac.com> wrote: Gentlemen, I thought it would be a nice thing to put together a list of different public services that each of us offers on HECNET to other HECNET users, maybe in the end putting this list up on hecnet.eu. I'm thinking along the lines of the info text files that we have on the HECnet infosearch on RHESUS, but more human readable. If you are offering something of interest (e.g. games, mail gateways, forums etc) accessible via HECnet, please let me know and I'll start compiling a HECnet Service Directory and maybe liaise with Mark to put it up on the hecnet.eu website. Sampsa

14 years, 12 months

1
0
0 0

A guide to "content" on HECNET?

by sampsa＠mac.com

Gentlemen, I thought it would be a nice thing to put together a list of different public services that each of us offers on HECNET to other HECNET users, maybe in the end putting this list up on hecnet.eu. I'm thinking along the lines of the info text files that we have on the HECnet infosearch on RHESUS, but more human readable. If you are offering something of interest (e.g. games, mail gateways, forums etc) accessible via HECnet, please let me know and I'll start compiling a HECnet Service Directory and maybe liaise with Mark to put it up on the hecnet.eu website. Sampsa

14 years, 12 months

1
0
0 0

FreeAXP Alpha Emulator

by sampsa＠mac.com

Joe, have a look at this for how to get started with your serial project: http://tldp.org/HOWTO/Text-Terminal-HOWTO-15.html I think for your terminal -> vax session I would setup an account on the Linux box with the shell set to "telnet <simh host> <serial mux telnet port>" For the scanner thing, you probably want the getty to automatically launch netcat - how you get past the VAX login procedures is beyond me though... Sampsa On 16 Jul 2010, at 21:48, Joe Ferraro wrote: haha.. I'll take you up on the chat thing... I love it when you systems guys say it's not brain surgery... I'd tend to agree; however, I'm just a dumb electrical engineer turned sys-admin -- any coding experience I *did* have was spent at the microcontroller level where things are simple... sorry to bother... have a good evening On Fri, Jul 16, 2010 at 4:31 PM, Sampsa Laine <sampsa at mac.com> wrote: Hmm... For 1., I would just hook up getty or something on the linux box and have it automatically connect to the TCP serial port on the VAX. For 2, not sure, but it's not brain surgery writing something that reads from a /dev/tty* and writes to a TCP socket. Could probably use the same little bit of code to accomplish both... Sampsa On 16 Jul 2010, at 21:28, Joe Ferraro wrote: 1.) hooking a vt up to the host linux box to access the VAX 2.) seeing if I could pass inbound serial data from a [serial] scanner to software on the emulated vax I know.. sounds silly... On Fri, Jul 16, 2010 at 4:14 PM, Sampsa Laine <sampsa at mac.com> wrote: Not much no, AFAIK the serial ports on SIMH VAX just expose themselves to the outside world as a TCP socket (listening inbound only, again as far as I can tell)... What are you planning on doing? Sampsa On 16 Jul 2010, at 21:10, Joe Ferraro wrote: Already done, my friend... it should be in the latest push... Ever done much serial (e.g. RS-232 and the like) programming? If so, do you know of any good references? I'd like to see if I can interface with the serial ports on a simh vax... Cheers... On Fri, Jul 16, 2010 at 4:06 PM, Sampsa Laine <sampsa at mac.com> wrote: OK, Cool, you need to let Johnny know so he can update the master node name database as well. Sampsa On 16 Jul 2010, at 21:02, Joe Ferraro wrote: Sampsa, I'm sure you've already realized via update, but I was just thinking that I forgot to mention it to you -- I've taken area 20 so as to be able to give you back your node addresses. I think I had the 8.50n series... Also, I have taylor up on solaris 10.. just need to configure it... Joe On Fri, Jul 16, 2010 at 1:26 PM, Sampsa Laine <msampsa at mac.co> wrote: Guys/Johnny, I'm registering two new nodes in my area, BONZO and LEMUR. BONZO is at 8.800 LEMUR is at 8.430 Sampsa On 16 Jul 2010, at 18:08, Marc Chametzky wrote: Have you ever run an Alpha with only 128MB of RAM? That is the absolute bare minimum I'd run 7.2 in, and it wasn't fun. I really wish they'd allow between 192MB and 256MB, as at that point it starts being usable. Of course I'd also like a Linux version. :-) They have a Linux version called CHARON-AXP/ES40 for Linux NCE. You can find it at http://www.stromasys.ch/axpnce/ . I've set it up here and it does work. The only downside is that the non-commercial (free) version shuts off after 30 days requiring a restart. Plus, it's time-bombed to stop working after December 31, 2010 (although a newer version should subsequently be available if past history continues). --Marc

14 years, 12 months

1
0
0 0

FreeAXP Alpha Emulator

by sampsa＠mac.com

Joe, In this case it literally is reading from a file descriptor and writing to a socket and vice versa - it's very straight forward. Mind you, personally I would just configure a couple of ports on my terminal server to do it for me - I guess you dont have one of those lying around...:) Sampsa On 16 Jul 2010, at 21:48, Joe Ferraro wrote: haha.. I'll take you up on the chat thing... I love it when you systems guys say it's not brain surgery... I'd tend to agree; however, I'm just a dumb electrical engineer turned sys-admin -- any coding experience I *did* have was spent at the microcontroller level where things are simple... sorry to bother... have a good evening On Fri, Jul 16, 2010 at 4:31 PM, Sampsa Laine <sampsa at mac.com> wrote: Hmm... For 1., I would just hook up getty or something on the linux box and have it automatically connect to the TCP serial port on the VAX. For 2, not sure, but it's not brain surgery writing something that reads from a /dev/tty* and writes to a TCP socket. Could probably use the same little bit of code to accomplish both... Sampsa On 16 Jul 2010, at 21:28, Joe Ferraro wrote: 1.) hooking a vt up to the host linux box to access the VAX 2.) seeing if I could pass inbound serial data from a [serial] scanner to software on the emulated vax I know.. sounds silly... On Fri, Jul 16, 2010 at 4:14 PM, Sampsa Laine <sampsa at mac.com> wrote: Not much no, AFAIK the serial ports on SIMH VAX just expose themselves to the outside world as a TCP socket (listening inbound only, again as far as I can tell)... What are you planning on doing? Sampsa On 16 Jul 2010, at 21:10, Joe Ferraro wrote: Already done, my friend... it should be in the latest push... Ever done much serial (e.g. RS-232 and the like) programming? If so, do you know of any good references? I'd like to see if I can interface with the serial ports on a simh vax... Cheers... On Fri, Jul 16, 2010 at 4:06 PM, Sampsa Laine <sampsa at mac.com> wrote: OK, Cool, you need to let Johnny know so he can update the master node name database as well. Sampsa On 16 Jul 2010, at 21:02, Joe Ferraro wrote: Sampsa, I'm sure you've already realized via update, but I was just thinking that I forgot to mention it to you -- I've taken area 20 so as to be able to give you back your node addresses. I think I had the 8.50n series... Also, I have taylor up on solaris 10.. just need to configure it... Joe On Fri, Jul 16, 2010 at 1:26 PM, Sampsa Laine <msampsa at mac.co> wrote: Guys/Johnny, I'm registering two new nodes in my area, BONZO and LEMUR. BONZO is at 8.800 LEMUR is at 8.430 Sampsa On 16 Jul 2010, at 18:08, Marc Chametzky wrote: Have you ever run an Alpha with only 128MB of RAM? That is the absolute bare minimum I'd run 7.2 in, and it wasn't fun. I really wish they'd allow between 192MB and 256MB, as at that point it starts being usable. Of course I'd also like a Linux version. :-) They have a Linux version called CHARON-AXP/ES40 for Linux NCE. You can find it at http://www.stromasys.ch/axpnce/ . I've set it up here and it does work. The only downside is that the non-commercial (free) version shuts off after 30 days requiring a restart. Plus, it's time-bombed to stop working after December 31, 2010 (although a newer version should subsequently be available if past history continues). --Marc

14 years, 12 months

1
0
0 0

FreeAXP Alpha Emulator

by jferraro＠gmail.com

haha.. I'll take you up on the chat thing... I love it when you systems guys say it's not brain surgery... I'd tend to agree; however, I'm just a dumb electrical engineer turned sys-admin -- any coding experience I *did* have was spent at the microcontroller level where things are simple... sorry to bother... have a good evening On Fri, Jul 16, 2010 at 4:31 PM, Sampsa Laine <sampsa at mac.com> wrote: Hmm... For 1., I would just hook up getty or something on the linux box and have it automatically connect to the TCP serial port on the VAX. For 2, not sure, but it's not brain surgery writing something that reads from a /dev/tty* and writes to a TCP socket. Could probably use the same little bit of code to accomplish both... Sampsa On 16 Jul 2010, at 21:28, Joe Ferraro wrote: 1.) hooking a vt up to the host linux box to access the VAX 2.) seeing if I could pass inbound serial data from a [serial] scanner to software on the emulated vax I know.. sounds silly... On Fri, Jul 16, 2010 at 4:14 PM, Sampsa Laine <sampsa at mac.com> wrote: Not much no, AFAIK the serial ports on SIMH VAX just expose themselves to the outside world as a TCP socket (listening inbound only, again as far as I can tell)... What are you planning on doing? Sampsa On 16 Jul 2010, at 21:10, Joe Ferraro wrote: Already done, my friend... it should be in the latest push... Ever done much serial (e.g. RS-232 and the like) programming? If so, do you know of any good references? I'd like to see if I can interface with the serial ports on a simh vax... Cheers... On Fri, Jul 16, 2010 at 4:06 PM, Sampsa Laine <sampsa at mac.com> wrote: OK, Cool, you need to let Johnny know so he can update the master node name database as well. Sampsa On 16 Jul 2010, at 21:02, Joe Ferraro wrote: Sampsa, I'm sure you've already realized via update, but I was just thinking that I forgot to mention it to you -- I've taken area 20 so as to be able to give you back your node addresses. I think I had the 8.50n series... Also, I have taylor up on solaris 10.. just need to configure it... Joe On Fri, Jul 16, 2010 at 1:26 PM, Sampsa Laine <msampsa at mac.co> wrote: Guys/Johnny, I'm registering two new nodes in my area, BONZO and LEMUR. BONZO is at 8.800 LEMUR is at 8.430 Sampsa On 16 Jul 2010, at 18:08, Marc Chametzky wrote: Have you ever run an Alpha with only 128MB of RAM? That is the absolute bare minimum I'd run 7.2 in, and it wasn't fun. I really wish they'd allow between 192MB and 256MB, as at that point it starts being usable. Of course I'd also like a Linux version. :-) They have a Linux version called CHARON-AXP/ES40 for Linux NCE. You can find it at http://www.stromasys.ch/axpnce/ . I've set it up here and it does work. The only downside is that the non-commercial (free) version shuts off after 30 days requiring a restart. Plus, it's time-bombed to stop working after December 31, 2010 (although a newer version should subsequently be available if past history continues). --Marc

14 years, 12 months

1
0
0 0

FreeAXP Alpha Emulator

by sampsa＠mac.com

Hmm... For 1., I would just hook up getty or something on the linux box and have it automatically connect to the TCP serial port on the VAX. For 2, not sure, but it's not brain surgery writing something that reads from a /dev/tty* and writes to a TCP socket. Could probably use the same little bit of code to accomplish both... Sampsa On 16 Jul 2010, at 21:28, Joe Ferraro wrote: 1.) hooking a vt up to the host linux box to access the VAX 2.) seeing if I could pass inbound serial data from a [serial] scanner to software on the emulated vax I know.. sounds silly... On Fri, Jul 16, 2010 at 4:14 PM, Sampsa Laine <sampsa at mac.com> wrote: Not much no, AFAIK the serial ports on SIMH VAX just expose themselves to the outside world as a TCP socket (listening inbound only, again as far as I can tell)... What are you planning on doing? Sampsa On 16 Jul 2010, at 21:10, Joe Ferraro wrote: Already done, my friend... it should be in the latest push... Ever done much serial (e.g. RS-232 and the like) programming? If so, do you know of any good references? I'd like to see if I can interface with the serial ports on a simh vax... Cheers... On Fri, Jul 16, 2010 at 4:06 PM, Sampsa Laine <sampsa at mac.com> wrote: OK, Cool, you need to let Johnny know so he can update the master node name database as well. Sampsa On 16 Jul 2010, at 21:02, Joe Ferraro wrote: Sampsa, I'm sure you've already realized via update, but I was just thinking that I forgot to mention it to you -- I've taken area 20 so as to be able to give you back your node addresses. I think I had the 8.50n series... Also, I have taylor up on solaris 10.. just need to configure it... Joe On Fri, Jul 16, 2010 at 1:26 PM, Sampsa Laine <msampsa at mac.co> wrote: Guys/Johnny, I'm registering two new nodes in my area, BONZO and LEMUR. BONZO is at 8.800 LEMUR is at 8.430 Sampsa On 16 Jul 2010, at 18:08, Marc Chametzky wrote: Have you ever run an Alpha with only 128MB of RAM? That is the absolute bare minimum I'd run 7.2 in, and it wasn't fun. I really wish they'd allow between 192MB and 256MB, as at that point it starts being usable. Of course I'd also like a Linux version. :-) They have a Linux version called CHARON-AXP/ES40 for Linux NCE. You can find it at http://www.stromasys.ch/axpnce/ . I've set it up here and it does work. The only downside is that the non-commercial (free) version shuts off after 30 days requiring a restart. Plus, it's time-bombed to stop working after December 31, 2010 (although a newer version should subsequently be available if past history continues). --Marc

14 years, 12 months

1
0
0 0

FreeAXP Alpha Emulator

by jferraro＠gmail.com

1.) hooking a vt up to the host linux box to access the VAX 2.) seeing if I could pass inbound serial data from a [serial] scanner to software on the emulated vax I know.. sounds silly... On Fri, Jul 16, 2010 at 4:14 PM, Sampsa Laine <sampsa at mac.com> wrote: Not much no, AFAIK the serial ports on SIMH VAX just expose themselves to the outside world as a TCP socket (listening inbound only, again as far as I can tell)... What are you planning on doing? Sampsa On 16 Jul 2010, at 21:10, Joe Ferraro wrote: Already done, my friend... it should be in the latest push... Ever done much serial (e.g. RS-232 and the like) programming? If so, do you know of any good references? I'd like to see if I can interface with the serial ports on a simh vax... Cheers... On Fri, Jul 16, 2010 at 4:06 PM, Sampsa Laine <sampsa at mac.com> wrote: OK, Cool, you need to let Johnny know so he can update the master node name database as well. Sampsa On 16 Jul 2010, at 21:02, Joe Ferraro wrote: Sampsa, I'm sure you've already realized via update, but I was just thinking that I forgot to mention it to you -- I've taken area 20 so as to be able to give you back your node addresses. I think I had the 8.50n series... Also, I have taylor up on solaris 10.. just need to configure it... Joe On Fri, Jul 16, 2010 at 1:26 PM, Sampsa Laine <msampsa at mac.co> wrote: Guys/Johnny, I'm registering two new nodes in my area, BONZO and LEMUR. BONZO is at 8.800 LEMUR is at 8.430 Sampsa On 16 Jul 2010, at 18:08, Marc Chametzky wrote: Have you ever run an Alpha with only 128MB of RAM? That is the absolute bare minimum I'd run 7.2 in, and it wasn't fun. I really wish they'd allow between 192MB and 256MB, as at that point it starts being usable. Of course I'd also like a Linux version. :-) They have a Linux version called CHARON-AXP/ES40 for Linux NCE. You can find it at http://www.stromasys.ch/axpnce/ . I've set it up here and it does work. The only downside is that the non-commercial (free) version shuts off after 30 days requiring a restart. Plus, it's time-bombed to stop working after December 31, 2010 (although a newer version should subsequently be available if past history continues). --Marc

14 years, 12 months

1
0
0 0

FreeAXP Alpha Emulator

by sampsa＠mac.com

Oh, BTW, your account on UUHEC.NET's App site is ready: User account information for Joe Ferraro: Your username is jpf and your temporary password is 767Q38 Your new email address is jpf at uuhec.net Sign in to Uuhec.net services: http://www.google.com/a/uuhec.net You can use that for Google Talk/Jabber, probably a bit more sane than firing emails back and forth :) Sampsa On 16 Jul 2010, at 21:10, Joe Ferraro wrote: Already done, my friend... it should be in the latest push... Ever done much serial (e.g. RS-232 and the like) programming? If so, do you know of any good references? I'd like to see if I can interface with the serial ports on a simh vax... Cheers... On Fri, Jul 16, 2010 at 4:06 PM, Sampsa Laine <sampsa at mac.com> wrote: OK, Cool, you need to let Johnny know so he can update the master node name database as well. Sampsa On 16 Jul 2010, at 21:02, Joe Ferraro wrote: Sampsa, I'm sure you've already realized via update, but I was just thinking that I forgot to mention it to you -- I've taken area 20 so as to be able to give you back your node addresses. I think I had the 8.50n series... Also, I have taylor up on solaris 10.. just need to configure it... Joe On Fri, Jul 16, 2010 at 1:26 PM, Sampsa Laine <msampsa at mac.co> wrote: Guys/Johnny, I'm registering two new nodes in my area, BONZO and LEMUR. BONZO is at 8.800 LEMUR is at 8.430 Sampsa On 16 Jul 2010, at 18:08, Marc Chametzky wrote: Have you ever run an Alpha with only 128MB of RAM? That is the absolute bare minimum I'd run 7.2 in, and it wasn't fun. I really wish they'd allow between 192MB and 256MB, as at that point it starts being usable. Of course I'd also like a Linux version. :-) They have a Linux version called CHARON-AXP/ES40 for Linux NCE. You can find it at http://www.stromasys.ch/axpnce/ . I've set it up here and it does work. The only downside is that the non-commercial (free) version shuts off after 30 days requiring a restart. Plus, it's time-bombed to stop working after December 31, 2010 (although a newer version should subsequently be available if past history continues). --Marc

14 years, 12 months

1
0
0 0

FreeAXP Alpha Emulator

by sampsa＠mac.com

Not much no, AFAIK the serial ports on SIMH VAX just expose themselves to the outside world as a TCP socket (listening inbound only, again as far as I can tell)... What are you planning on doing? Sampsa On 16 Jul 2010, at 21:10, Joe Ferraro wrote: Already done, my friend... it should be in the latest push... Ever done much serial (e.g. RS-232 and the like) programming? If so, do you know of any good references? I'd like to see if I can interface with the serial ports on a simh vax... Cheers... On Fri, Jul 16, 2010 at 4:06 PM, Sampsa Laine <sampsa at mac.com> wrote: OK, Cool, you need to let Johnny know so he can update the master node name database as well. Sampsa On 16 Jul 2010, at 21:02, Joe Ferraro wrote: Sampsa, I'm sure you've already realized via update, but I was just thinking that I forgot to mention it to you -- I've taken area 20 so as to be able to give you back your node addresses. I think I had the 8.50n series... Also, I have taylor up on solaris 10.. just need to configure it... Joe On Fri, Jul 16, 2010 at 1:26 PM, Sampsa Laine <msampsa at mac.co> wrote: Guys/Johnny, I'm registering two new nodes in my area, BONZO and LEMUR. BONZO is at 8.800 LEMUR is at 8.430 Sampsa On 16 Jul 2010, at 18:08, Marc Chametzky wrote: Have you ever run an Alpha with only 128MB of RAM? That is the absolute bare minimum I'd run 7.2 in, and it wasn't fun. I really wish they'd allow between 192MB and 256MB, as at that point it starts being usable. Of course I'd also like a Linux version. :-) They have a Linux version called CHARON-AXP/ES40 for Linux NCE. You can find it at http://www.stromasys.ch/axpnce/ . I've set it up here and it does work. The only downside is that the non-commercial (free) version shuts off after 30 days requiring a restart. Plus, it's time-bombed to stop working after December 31, 2010 (although a newer version should subsequently be available if past history continues). --Marc

14 years, 12 months

1
0
0 0

FreeAXP Alpha Emulator

by jferraro＠gmail.com

Already done, my friend... it should be in the latest push... Ever done much serial (e.g. RS-232 and the like) programming? If so, do you know of any good references? I'd like to see if I can interface with the serial ports on a simh vax... Cheers... On Fri, Jul 16, 2010 at 4:06 PM, Sampsa Laine <sampsa at mac.com> wrote: OK, Cool, you need to let Johnny know so he can update the master node name database as well. Sampsa On 16 Jul 2010, at 21:02, Joe Ferraro wrote: Sampsa, I'm sure you've already realized via update, but I was just thinking that I forgot to mention it to you -- I've taken area 20 so as to be able to give you back your node addresses. I think I had the 8.50n series... Also, I have taylor up on solaris 10.. just need to configure it... Joe On Fri, Jul 16, 2010 at 1:26 PM, Sampsa Laine <msampsa at mac.co> wrote: Guys/Johnny, I'm registering two new nodes in my area, BONZO and LEMUR. BONZO is at 8.800 LEMUR is at 8.430 Sampsa On 16 Jul 2010, at 18:08, Marc Chametzky wrote: Have you ever run an Alpha with only 128MB of RAM? That is the absolute bare minimum I'd run 7.2 in, and it wasn't fun. I really wish they'd allow between 192MB and 256MB, as at that point it starts being usable. Of course I'd also like a Linux version. :-) They have a Linux version called CHARON-AXP/ES40 for Linux NCE. You can find it at http://www.stromasys.ch/axpnce/ . I've set it up here and it does work. The only downside is that the non-commercial (free) version shuts off after 30 days requiring a restart. Plus, it's time-bombed to stop working after December 31, 2010 (although a newer version should subsequently be available if past history continues). --Marc

14 years, 12 months

1
0
0 0

FreeAXP Alpha Emulator

by sampsa＠mac.com

OK, Cool, you need to let Johnny know so he can update the master node name database as well. Sampsa On 16 Jul 2010, at 21:02, Joe Ferraro wrote: Sampsa, I'm sure you've already realized via update, but I was just thinking that I forgot to mention it to you -- I've taken area 20 so as to be able to give you back your node addresses. I think I had the 8.50n series... Also, I have taylor up on solaris 10.. just need to configure it... Joe On Fri, Jul 16, 2010 at 1:26 PM, Sampsa Laine <msampsa at mac.co> wrote: Guys/Johnny, I'm registering two new nodes in my area, BONZO and LEMUR. BONZO is at 8.800 LEMUR is at 8.430 Sampsa On 16 Jul 2010, at 18:08, Marc Chametzky wrote: Have you ever run an Alpha with only 128MB of RAM? That is the absolute bare minimum I'd run 7.2 in, and it wasn't fun. I really wish they'd allow between 192MB and 256MB, as at that point it starts being usable. Of course I'd also like a Linux version. :-) They have a Linux version called CHARON-AXP/ES40 for Linux NCE. You can find it at http://www.stromasys.ch/axpnce/ . I've set it up here and it does work. The only downside is that the non-commercial (free) version shuts off after 30 days requiring a restart. Plus, it's time-bombed to stop working after December 31, 2010 (although a newer version should subsequently be available if past history continues). --Marc

14 years, 12 months

1
0
0 0

FreeAXP Alpha Emulator

by jferraro＠gmail.com

Sampsa, I'm sure you've already realized via update, but I was just thinking that I forgot to mention it to you -- I've taken area 20 so as to be able to give you back your node addresses. I think I had the 8.50n series... Also, I have taylor up on solaris 10.. just need to configure it... Joe On Fri, Jul 16, 2010 at 1:26 PM, Sampsa Laine <msampsa at mac.co> wrote: Guys/Johnny, I'm registering two new nodes in my area, BONZO and LEMUR. BONZO is at 8.800 LEMUR is at 8.430 Sampsa On 16 Jul 2010, at 18:08, Marc Chametzky wrote: Have you ever run an Alpha with only 128MB of RAM? That is the absolute bare minimum I'd run 7.2 in, and it wasn't fun. I really wish they'd allow between 192MB and 256MB, as at that point it starts being usable. Of course I'd also like a Linux version. :-) They have a Linux version called CHARON-AXP/ES40 for Linux NCE. You can find it at http://www.stromasys.ch/axpnce/ . I've set it up here and it does work. The only downside is that the non-commercial (free) version shuts off after 30 days requiring a restart. Plus, it's time-bombed to stop working after December 31, 2010 (although a newer version should subsequently be available if past history continues). --Marc

14 years, 12 months

1
0
0 0

FreeAXP Alpha Emulator

by uusimaki＠exdecfinland.org

On 16.7.2010 19:57, Zane H. Healy wrote: On Fri, 16 Jul 2010, Sampsa Laine wrote: Guys, just saw this on openvmshobbyist.com: FreeAXP http://www.migrationspecialties.com/FreeAXP.html#Components It emulates a AlphaServer 400 with up to 7 drives and 128 MB of RAM. Runs on Windows though :( I'm currently rolling out a test system to see how well it behaves on Win2K3 Server. Sampsa Have you ever run an Alpha with only 128MB of RAM? That is the absolute bare minimum I'd run 7.2 in, and it wasn't fun. I really wish they'd allow between 192MB and 256MB, as at that point it starts being usable. Of course I'd also like a Linux version. :-) Zane . I have. Even with 64MB. ;-) It was a DEC3000-300X back in 1993 with AXPVMS V1.5 and also with OSF/1 V2.x and 3.0. I have also tested a Multia with 64MB and VMS V7.3. It worked, but was really slow. I wasn't expecting much more than bootability. The Multia is slow (EV4/166MHz or EV4/233MHz) and 64MB is the absolute minimum for AXPVMS. Kari

14 years, 12 months

1
0
0 0

Terminal software (other than DECterm) that can do ReGIS and/or SIXEL graphics?

by wilson＠dbit.com

From: Paul Koning <paul_koning at dell.com> It [ReGIS] also showed up, in lobotomized form, in the "GIGI" (don't bother looking for one, they suck). Aw c'mon, we *loved* the ones we had at our H.S.! They were terrible VT100s but the graphics were competitive with micros at the time (so the quality of RSTS video games went way up), and the MBASIC-80 in ROM gave us something to play with when the PDP-11 was down. John Wilson D Bit

14 years, 12 months

1
0
0 0

FreeAXP Alpha Emulator

by sampsa＠mac.com

Guys/Johnny, I'm registering two new nodes in my area, BONZO and LEMUR. BONZO is at 8.800 LEMUR is at 8.430 Sampsa On 16 Jul 2010, at 18:08, Marc Chametzky wrote: Have you ever run an Alpha with only 128MB of RAM? That is the absolute bare minimum I'd run 7.2 in, and it wasn't fun. I really wish they'd allow between 192MB and 256MB, as at that point it starts being usable. Of course I'd also like a Linux version. :-) They have a Linux version called CHARON-AXP/ES40 for Linux NCE. You can find it at http://www.stromasys.ch/axpnce/ . I've set it up here and it does work. The only downside is that the non-commercial (free) version shuts off after 30 days requiring a restart. Plus, it's time-bombed to stop working after December 31, 2010 (although a newer version should subsequently be available if past history continues). --Marc

14 years, 12 months

1
0
0 0

FreeAXP Alpha Emulator

by marc＠bluevine.net

Have you ever run an Alpha with only 128MB of RAM? That is the absolute bare minimum I'd run 7.2 in, and it wasn't fun. I really wish they'd allow between 192MB and 256MB, as at that point it starts being usable. Of course I'd also like a Linux version. :-) They have a Linux version called CHARON-AXP/ES40 for Linux NCE. You can find it at http://www.stromasys.ch/axpnce/ . I've set it up here and it does work. The only downside is that the non-commercial (free) version shuts off after 30 days requiring a restart. Plus, it's time-bombed to stop working after December 31, 2010 (although a newer version should subsequently be available if past history continues). --Marc

14 years, 12 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

HECnet