(Nor do I know a TOPS-20 equivalent, but I would like to...)
As T10 and T20 shares the same code, the answer is the same for both:
it dont have such a command.
The command can be added(#63621873 on my list of things to do) but
it's still not to usefull as T10/T20 do not have the concept of a
permanent database for DECnet. As there are monitor calls to talk to
DECnet there is a small program "NODNAM.EXE" that reads
INI:NODNAMN.INI and loads the internal DECnet data structures...
nodnamn.ini can have both "set" and "define" lines..
set node 1.13 name nim
define node 1.13 name nim
--P
Wow, that's odd. I have no idea why that'd be happening.
In this case thay think the own you and you get the cnnectivity that
they decide you should have, with the performance they decide....
(as they are only a local US network with a captive audience...)
Excellent, thank you! I have routes for area 59 via Reston.
Cool.. set host sol::
$in decnet
$in arpanet
-Peter
By the way, I hope you know that VMS can copy the nodename database
directly from another machine without you having to hack files on your
own, if that is the reason why you asked for a file...
....that's why it's VMSnet.. (Cterm sends QIO calls...)
$opr
OPR>ent ncp
NCP>?
ENTER EXIT PUSH RETURN TAKE WAIT
CANCEL CLEAR DEFINE DUMP HELP LIST LOAD
LOOP PURGE SET SHOW TELL TRIGGER ZERO
$
$in ver
** SC-40 Sol.Stupi.SE **, TOPS-20 Monitor 7(21733)
TOPS-20 Command processor 7(4453)-3
Program is OPR, version is 6(7134)
--P
Ah dear. That'll be the ones then. Rather loud paddle-blowers in them as
I recall.
Think I have some breeding in a dusty corner somewhere.
Al.
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On
Behalf Of Peter Coghlan
Sent: Tuesday, 1 May 2012 9:08 AM
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] GRE tunnel working!
Hi Peter.. when is this the IGS's that have a 16Mhz m68020 in them? I
think I've got one or two (Although I've not dug that deep in over a
decade).
At startup, it says:
Cisco Internetwork Operating System Software
IOS (tm) 3000 Software (IGS-BPRX), Version 10.0(6), RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-1994 by cisco Systems, Inc.
Compiled Tue 25-Oct-94 19:01 by dougs
cisco IGS (68020) processor (revision A) with 4092K/512K bytes of
memory.
I can't find any reference to the processor speed anywhere.
Regards,
Peter Coghlan.
On 04/29/2012 04:14 AM, Kari Uusim ki wrote:
DECnet must have been around at least from 1993, because the
DECbrouter90's, which were practically Cisco routers in a DEChub90
module, were introduced in 1993. And they used IOS.
Did you mean DECnet support in IOS, or DECnet itself? DECnet itself
dates to the mid-1970s.
What I haven't found out is when the IP tunnels were introduced in the
IOS. It seems to be in IOS 11.2. So it is included in all recent
versions, but the Cisco 2500's have limited flash and RAM capabilites.
Therefore the recent IOS's cannot be used with older hardware. I suppose
the IOS 11.2 should be sufficient for tunneling DECnet over IP.
I'll bet much older releases than that would support this.
I have to check which versions I have on my 2500's. Most probably they
have an IP-only version of the IOS. I bought the 2500's cheap from a
local broker a few years ago.
I've got lots of IOS images if needed. Let me know if I can help.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On 04/30/2012 08:07 PM, Peter Coghlan wrote:
Hmm, that's not good. If memory serves, in an IGS, IOS resides in a
bank of EPROMs and the memory is in the form of 30-pin SIMMs. I'd try
re-seating those and see how far you get.
I've reseated the SIMMs. I'll test for a while and see how it behaves now.
Good luck!
The 1600 does not have DECnet capable software.
Perhaps Brian can help out here.
Perhaps. The 1600 doesn't look or sound as impressive as the IGS though :-)
Indeed. ;) The IGS became the 3000, which then sorta morphed into the
68030-based 2500 platform. We all know how long those little buggers
lasted. I still see them in service from time to time today! Damn good
hardware. Simple and bulletproof.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
-----Original Message-----
From: owner-hecnet at Update.UU.SE
[mailto:owner-hecnet at Update.UU.SE] On Behalf Of Johnny Billquist
Sent: Monday, April 30, 2012 15:54
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] Area 61 node list
On 2012-04-30 21:46, Johnny Billquist wrote:
On 2012-04-30 21:38, Dave McGuire wrote:
Here is my current node list. AXPEE is up 24/7. Last night
I finished
unloaded a truck full of stuff from my old house,
including lots of
VAXen, so there will likely be some more coming up soon.
Node Name System
------------------------------------------------------------------
61.1 GW Cisco 7206VXR, IOS 12.3
61.2 AXPEE DS10L, 466MHz, 1GB, 120GB, VMS 8.3
61.3 EBOLA VAX 4000/700A, 128MB, 4GB, VMS 7.3
61.4 MECCA PDP-11/53, RSTS/E v10.1
61.5 FANG PDP-11/70, RSTS/E v10.1
61.50 RA Linux
Gothca.
Another file you might want to look at, if you prefer, would be
MIM::US:[DECNET]NODENAMES.DAT. The format should be obvious if you
check either that, or FIX.CMD
By the way, I hope you know that VMS can copy the nodename
database directly from another machine without you having to
hack files on your own, if that is the reason why you asked
for a file...
Assuming you are running Phase IV, just do:
"MCR NCP COPY KNOWN NODES FROM MIM TO BOTH"
and you are set.
replace MIM with 1.13, if you don't have MIM in your database already.
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
Be careful using "MCR NCP COPY KNOWN NODES FROM MIM TO BOTH". If you
have a cluster you may delete important records.
-Steve
Hmm, that's not good. If memory serves, in an IGS, IOS resides in a
bank of EPROMs and the memory is in the form of 30-pin SIMMs. I'd try
re-seating those and see how far you get.
I've reseated the SIMMs. I'll test for a while and see how it behaves now.
The 1600 does not have DECnet capable software.
Perhaps Brian can help out here.
Perhaps. The 1600 doesn't look or sound as impressive as the IGS though :-)
Regards,
Peter Coghlan.
Hi Peter.. when is this the IGS's that have a 16Mhz m68020 in them? I
think I've got one or two (Although I've not dug that deep in over a
decade).
At startup, it says:
Cisco Internetwork Operating System Software
IOS (tm) 3000 Software (IGS-BPRX), Version 10.0(6), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1994 by cisco Systems, Inc.
Compiled Tue 25-Oct-94 19:01 by dougs
cisco IGS (68020) processor (revision A) with 4092K/512K bytes of memory.
I can't find any reference to the processor speed anywhere.
Regards,
Peter Coghlan.
Another listmember has given me the required incantations.
It was looking good for the IGS for a while. To my surprise, it turned
out to
have DECnet capable software. Unfortunately, it was too good to last.
This
machine is now looking a bit sick. It keeps rebooting and not getting
past
the first two lines of the startup banner.
The 1600 does not have DECnet capable software.
Regards,
Peter Coghlan.
Hi Peter.. when is this the IGS's that have a 16Mhz m68020 in them? I
think I've got one or two (Although I've not dug that deep in over a
decade).
Al.
On 2012-04-30 22:44, Dave McGuire wrote:
On 04/30/2012 03:54 PM, Johnny Billquist wrote:
Here is my current node list. AXPEE is up 24/7. Last night I
finished unloaded a truck full of stuff from my old house, including
lots of VAXen, so there will likely be some more coming up soon.
Node Name System
------------------------------------------------------------------
61.1 GW Cisco 7206VXR, IOS 12.3
61.2 AXPEE DS10L, 466MHz, 1GB, 120GB, VMS 8.3
61.3 EBOLA VAX 4000/700A, 128MB, 4GB, VMS 7.3
61.4 MECCA PDP-11/53, RSTS/E v10.1
61.5 FANG PDP-11/70, RSTS/E v10.1
61.50 RA Linux
Gothca.
By the way, I know "GW" is a pretty generic name; you can leave that
out if you'd like. It's just my router here.
One convention that I've seen/used in the past have been to call the area router for areas in DECnet names like "AnnRTR", where nn is the area number. So, in your case, that would be A61RTR. It's an idea anyway. But I'll leave it to you to decide what to call the machine. I just keep the records...
Another file you might want to look at, if you prefer, would be
MIM::US:[DECNET]NODENAMES.DAT. The format should be obvious if you check
either that, or FIX.CMD
By the way, I hope you know that VMS can copy the nodename database
directly from another machine without you having to hack files on your
own, if that is the reason why you asked for a file...
(from your reference below, I just did that)
:-)
What I'll need to hack the files for, though, are Linux, RSTS/E (most
likely), and the Cisco. I'll just do it with an awk script, that'll be
quick and easy.
Right. Although, you might be able to more or less use the file as is for RSTS/E...
And unless you actually need to do stuff on the Cisco, you don't really have to have a complete nodename database in there...
Assuming you are running Phase IV, just do:
"MCR NCP COPY KNOWN NODES FROM MIM TO BOTH"
and you are set.
Oh nice, I didn't know about that trick. Thanks!
You are welcome. :-)
Now, under RSX, you do this in a very different way. And don't even ask me about RSTS/E, since I don't know for that one. ;-)
(Nor do I know a TOPS-20 equivalent, but I would like to...)
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
On 04/30/2012 03:54 PM, Johnny Billquist wrote:
Here is my current node list. AXPEE is up 24/7. Last night I
finished unloaded a truck full of stuff from my old house, including
lots of VAXen, so there will likely be some more coming up soon.
Node Name System
------------------------------------------------------------------
61.1 GW Cisco 7206VXR, IOS 12.3
61.2 AXPEE DS10L, 466MHz, 1GB, 120GB, VMS 8.3
61.3 EBOLA VAX 4000/700A, 128MB, 4GB, VMS 7.3
61.4 MECCA PDP-11/53, RSTS/E v10.1
61.5 FANG PDP-11/70, RSTS/E v10.1
61.50 RA Linux
Gothca.
By the way, I know "GW" is a pretty generic name; you can leave that
out if you'd like. It's just my router here.
Another file you might want to look at, if you prefer, would be
MIM::US:[DECNET]NODENAMES.DAT. The format should be obvious if you check
either that, or FIX.CMD
By the way, I hope you know that VMS can copy the nodename database
directly from another machine without you having to hack files on your
own, if that is the reason why you asked for a file...
(from your reference below, I just did that)
What I'll need to hack the files for, though, are Linux, RSTS/E (most
likely), and the Cisco. I'll just do it with an awk script, that'll be
quick and easy.
Assuming you are running Phase IV, just do:
"MCR NCP COPY KNOWN NODES FROM MIM TO BOTH"
and you are set.
Oh nice, I didn't know about that trick. Thanks!
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On 04/30/2012 03:41 PM, Peter Coghlan wrote:
They're trivially easy to crack if you have console access. Drop me a
note if you want to work on those and have trouble finding the
appropriate info.
Thanks Dave.
Another listmember has given me the required incantations.
Excellent.
It was looking good for the IGS for a while. To my surprise, it turned out to
have DECnet capable software. Unfortunately, it was too good to last. This
machine is now looking a bit sick. It keeps rebooting and not getting past
the first two lines of the startup banner.
Hmm, that's not good. If memory serves, in an IGS, IOS resides in a
bank of EPROMs and the memory is in the form of 30-pin SIMMs. I'd try
re-seating those and see how far you get.
The 1600 does not have DECnet capable software.
Perhaps Brian can help out here.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On 04/30/2012 09:09 PM, Peter Lothberg wrote:
What is your IP address? Mine are on the HECnet mailinglinst.
My 7206VXR's external-facing interface is 50.73.179.1.
Hum.. That is on a network that refuced to peer with me:
MM>!traceroute 50.73.179.1
traceroute to 50.73.179.1 (50.73.179.1), 64 hops max, 52 byte packets
1 R29A-GW.Stupi.SE (192.108.198.254) 0.260 ms 0.245 ms 0.287 ms
2 R29BFR-GE-2-0-6-GW.Stupi.NET (192.108.195.150) 0.435 ms !H * 0.303 ms !H
Wow, that's odd. I have no idea why that'd be happening.
But it will work from the box in Reston..
interface Tunnel4001
no ip address
ip broadcast-address 0.0.0.0
decnet cost 10
tunnel source 199.0.131.2
tunnel destination 50.73.179.1
Excellent, thank you! I have routes for area 59 via Reston.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On 04/30/2012 03:39 PM, Johnny Billquist wrote:
Might already have that (more or less).
MIM::US:[DECNET]FIX.CMD have all the nodes except MIM herself. One per
line, in a format that is usable for NCP (or CFE in RSX).
Ok. Slight chicken/egg problem, though...what's the node address
of MIM?
*The* most important machine on HECnet... And it's not already in your
database... Tsk... :-)
Mmm-hmm. ;)
1.13
Got it. Thanks!
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On 2012-04-30 21:46, Johnny Billquist wrote:
On 2012-04-30 21:38, Dave McGuire wrote:
Here is my current node list. AXPEE is up 24/7. Last night I
finished unloaded a truck full of stuff from my old house, including
lots of VAXen, so there will likely be some more coming up soon.
Node Name System
------------------------------------------------------------------
61.1 GW Cisco 7206VXR, IOS 12.3
61.2 AXPEE DS10L, 466MHz, 1GB, 120GB, VMS 8.3
61.3 EBOLA VAX 4000/700A, 128MB, 4GB, VMS 7.3
61.4 MECCA PDP-11/53, RSTS/E v10.1
61.5 FANG PDP-11/70, RSTS/E v10.1
61.50 RA Linux
Gothca.
Another file you might want to look at, if you prefer, would be
MIM::US:[DECNET]NODENAMES.DAT. The format should be obvious if you check
either that, or FIX.CMD
By the way, I hope you know that VMS can copy the nodename database directly from another machine without you having to hack files on your own, if that is the reason why you asked for a file...
Assuming you are running Phase IV, just do:
"MCR NCP COPY KNOWN NODES FROM MIM TO BOTH"
and you are set.
replace MIM with 1.13, if you don't have MIM in your database already.
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
On 2012-04-30 21:38, Dave McGuire wrote:
Here is my current node list. AXPEE is up 24/7. Last night I
finished unloaded a truck full of stuff from my old house, including
lots of VAXen, so there will likely be some more coming up soon.
Node Name System
------------------------------------------------------------------
61.1 GW Cisco 7206VXR, IOS 12.3
61.2 AXPEE DS10L, 466MHz, 1GB, 120GB, VMS 8.3
61.3 EBOLA VAX 4000/700A, 128MB, 4GB, VMS 7.3
61.4 MECCA PDP-11/53, RSTS/E v10.1
61.5 FANG PDP-11/70, RSTS/E v10.1
61.50 RA Linux
Gothca.
Another file you might want to look at, if you prefer, would be MIM::US:[DECNET]NODENAMES.DAT. The format should be obvious if you check either that, or FIX.CMD
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
They're trivially easy to crack if you have console access. Drop me a
note if you want to work on those and have trouble finding the
appropriate info.
Thanks Dave.
Another listmember has given me the required incantations.
It was looking good for the IGS for a while. To my surprise, it turned out to
have DECnet capable software. Unfortunately, it was too good to last. This
machine is now looking a bit sick. It keeps rebooting and not getting past
the first two lines of the startup banner.
The 1600 does not have DECnet capable software.
Regards,
Peter Coghlan.
On 2012-04-30 21:34, Dave McGuire wrote:
On 04/30/2012 03:29 PM, Johnny Billquist wrote:
I even have automated populating the DECnet permanent nodename database
on MIM from the Datatrieve database. So when I get updates, I just
insert them into Datatrieve, and then kick off the updating process.
Excellent.
Hmm ok. Do you know if the RSX distribution of DTR-11 run under
RSTS/E's RSX RTS? I don't have an operational RSX-11 system here. (yet)
I very much doubt it would work. DTR is playing some pretty low level
tricks, including having multiple tasks and interprocess communication
under RSX.
Yuck.
:-)
And unfortunately I don't have any leads to DTR-11 for RSTS/E. I assume
it did exist?
I'm not certain; I've never worked with it. I'm willing to bet that
it did, though.
Just did a check in the wayback machine, and apparently at least Mentec did not sell it. Anyone know if it did exist?
Oh ok, thank you. I'd love to have it just as a text file that I can
massage into my various machines here. One line per entry would be best
for me. Is that doable on your end without any trouble?
Might already have that (more or less).
MIM::US:[DECNET]FIX.CMD have all the nodes except MIM herself. One per
line, in a format that is usable for NCP (or CFE in RSX).
Ok. Slight chicken/egg problem, though...what's the node address of MIM?
*The* most important machine on HECnet... And it's not already in your database... Tsk... :-)
1.13
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
Here is my current node list. AXPEE is up 24/7. Last night I
finished unloaded a truck full of stuff from my old house, including
lots of VAXen, so there will likely be some more coming up soon.
Node Name System
------------------------------------------------------------------
61.1 GW Cisco 7206VXR, IOS 12.3
61.2 AXPEE DS10L, 466MHz, 1GB, 120GB, VMS 8.3
61.3 EBOLA VAX 4000/700A, 128MB, 4GB, VMS 7.3
61.4 MECCA PDP-11/53, RSTS/E v10.1
61.5 FANG PDP-11/70, RSTS/E v10.1
61.50 RA Linux
--
Dave McGuire, AK4HZ
New Kensington, PA
On 04/30/2012 03:29 PM, Johnny Billquist wrote:
I even have automated populating the DECnet permanent nodename database
on MIM from the Datatrieve database. So when I get updates, I just
insert them into Datatrieve, and then kick off the updating process.
Excellent.
Hmm ok. Do you know if the RSX distribution of DTR-11 run under
RSTS/E's RSX RTS? I don't have an operational RSX-11 system here. (yet)
I very much doubt it would work. DTR is playing some pretty low level
tricks, including having multiple tasks and interprocess communication
under RSX.
Yuck.
And unfortunately I don't have any leads to DTR-11 for RSTS/E. I assume
it did exist?
I'm not certain; I've never worked with it. I'm willing to bet that
it did, though.
Oh ok, thank you. I'd love to have it just as a text file that I can
massage into my various machines here. One line per entry would be best
for me. Is that doable on your end without any trouble?
Might already have that (more or less).
MIM::US:[DECNET]FIX.CMD have all the nodes except MIM herself. One per
line, in a format that is usable for NCP (or CFE in RSX).
Ok. Slight chicken/egg problem, though...what's the node address of MIM?
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On 2012-04-30 21:19, Dave McGuire wrote:
On 04/30/2012 02:57 PM, Johnny Billquist wrote:
Yes! Also, is there a "master" node list anywhere?
Node list, as in which nodes exist? Not really, the closest is the
nodename database on MIM. While noone is required, or forced to tell me,
I gently ask that people submit nodenames and numbers to me, and I keep
MIM up to date. People can then copy the nodenames from MIM.
Ok. I will forward my current list along in a moment.
Please do. :-)
I also have the nodename database in a Datatrieve-11 database.
Oh that's cool. :-)
I even have automated populating the DECnet permanent nodename database on MIM from the Datatrieve database. So when I get updates, I just insert them into Datatrieve, and then kick off the updating process.
It seems
there might be some incompatibilities between DTR-11 and DTR-32, so I'm
not sure if you can manage access from a VMS box (or anything else).
Remote DTR access works fine from another RSX box atleast.
Hmm ok. Do you know if the RSX distribution of DTR-11 run under
RSTS/E's RSX RTS? I don't have an operational RSX-11 system here. (yet)
I very much doubt it would work. DTR is playing some pretty low level tricks, including having multiple tasks and interprocess communication under RSX.
And unfortunately I don't have any leads to DTR-11 for RSTS/E. I assume it did exist?
If you need the data in some specific format, I can probably produce
that for you.
Oh ok, thank you. I'd love to have it just as a text file that I can
massage into my various machines here. One line per entry would be best
for me. Is that doable on your end without any trouble?
Might already have that (more or less).
MIM::US:[DECNET]FIX.CMD have all the nodes except MIM herself. One per line, in a format that is usable for NCP (or CFE in RSX).
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
About once a week I type MC NCP COPY KNOWN NODES FROM MIM TO BOTH on AR44 (44.1023) and the same with OSMIUM as target.
AR44 is always up, linux permitting (it has a tendency to fall asleep on a laptop) though a tad slow perhaps.
Hans
------Origineel bericht------
Van: Dave McGuire
Afzender: owner-hecnet at Update.UU.SE
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: Re: [HECnet] GRE tunnel working!
Verzonden: 30 april 2012 20:51
On 04/30/2012 09:16 AM, Brian Hechinger wrote:
My memory is short, but someone made a map of HECnet, they are better
off to answer this question, I just deliver the milk.
Speaking of said map. It's time to update it with GRE tunnels. :)
Yes! Also, is there a "master" node list anywhere?
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On 04/30/2012 02:57 PM, Johnny Billquist wrote:
Yes! Also, is there a "master" node list anywhere?
Node list, as in which nodes exist? Not really, the closest is the
nodename database on MIM. While noone is required, or forced to tell me,
I gently ask that people submit nodenames and numbers to me, and I keep
MIM up to date. People can then copy the nodenames from MIM.
Ok. I will forward my current list along in a moment.
I also have the nodename database in a Datatrieve-11 database.
Oh that's cool. :-)
It seems
there might be some incompatibilities between DTR-11 and DTR-32, so I'm
not sure if you can manage access from a VMS box (or anything else).
Remote DTR access works fine from another RSX box atleast.
Hmm ok. Do you know if the RSX distribution of DTR-11 run under
RSTS/E's RSX RTS? I don't have an operational RSX-11 system here. (yet)
If you need the data in some specific format, I can probably produce
that for you.
Oh ok, thank you. I'd love to have it just as a text file that I can
massage into my various machines here. One line per entry would be best
for me. Is that doable on your end without any trouble?
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On 2012-04-30 18:46, Peter Lothberg wrote:
On 2012-04-30 12.54, Peter Lothberg wrote:
bart#show decnet nei
Net Node Interface MAC address Flags
0 59.59 Tunnel1 0000.0000.0000 A
0 61.1 Tunnel0 0000.0000.0000 A
0 52.4 FastEthernet0/0.2 aa00.0400.04d0
Tunnel2 (the one to sweden) hasn't come up yet, just FYI.
My error...
Router#sh decnet ne
Net Node Interface MAC address Flags
0 52.1 Tunnel4000 0000.0000.0000 A
0 59.57 Tunnel2000 0000.0000.0000 V
0 59.58 Ethernet0 aa00.0400.3aec V A
0 59.59 Tunnel3000 0000.0000.0000 V A
Anyone else that wan't to join the routed DECnet over GRE tunnel
network?
If we only had a Cisco box... ;-)
I can fix that!
That would be nice. Needed in Uppsala then, with DECnet, and then we'll happily also act as a hub for that.
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
