SOL (59.10) =>NI-0-0 / QNA-0 <= STUPI (59.58) 2.49 -1 -1 1.26
STUPI (59.58) =>TCP-0-4 / TCP-0-4 <= CODA (2.7) 0.51 -1 -1 0.37
CODA (2.7) =>TCP-0-7 / TCP-0-0 <= GORVAX (1.400) 2.50 -1 -1 1.44
GORVAX (1.400) =>QNA-0 / ISA-0 <= ORAC (1.250) 1.50 4 1 1.50
Any chance you talk "multinet" or "cisco" encapsulation of DECnet over
IP, as I think we are making a detour Sweden-UK...
..and, why not talk smtp over DECnet transport, we used to do that
1988 or so to avoid having -not-needed- rewites of addresses...
-P
Ps; SOL is also Sol.Stupi.SE
Hi Peter,
Sorry, you'll have to explain what you're asking me. Johnny set up ORAC
connectivity - I don't think there is anything unusual going on, but if
you tell me how to look for it I can investigate.
Regards, Mark.
SOL (59.10) =>NI-0-0 / QNA-0 <= STUPI (59.58) 2.49 -1 -1 1.26
STUPI (59.58) =>TCP-0-4 / TCP-0-4 <= CODA (2.7) 0.51 -1 -1 0.37
CODA (2.7) =>TCP-0-7 / TCP-0-0 <= GORVAX (1.400) 2.50 -1 -1 1.44
GORVAX (1.400) =>QNA-0 / ISA-0 <= ORAC (1.250) 1.50 4 1 1.50
Any chance you talk "multinet" or "cisco" encapsulation of DECnet over
IP, as I think we are making a detour Sweden-UK...
..and, why not talk smtp over DECnet transport, we used to do that
1988 or so to avoid having -not-needed- rewites of addresses...
-P
Ps; SOL is also Sol.Stupi.SE
Circuit QNA-0, Adjacent node = 1.15 (PONDUS)
--
Also I've looked at CHIMP and it seems there's the same problem there:
--
$ NCP SHO ADJ NOD
Node Volatile Summary as of 15-OCT-2009 07:57:24
Node State Active Delay Circuit Next node
Links
1.15 (PONDUS) EWA-0 1.15 (PONDUS)
$
$ NCP SHO ADJ NOD
Node Volatile Summary as of 15-OCT-2009 07:57:25
Node State Active Delay Circuit Next node
Links
1.13 (MIM) 1 3 EWA-0 1.13 (MIM)
$
--
Btw, how non-routing node decides which of routing nodes should be adjacent node?
The Auto-Install procedure for F77 only came in V5.4. V5.3 uses another installation procedure.
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at update.uu.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
Yes I agree mailman would be simpler.
I can set up an unlimited number of GNU mailman lists on sonic.net, but
the problem is convincing people to use it instead of the other one. I
suppose we could always subscribe it to Johnny's list - that way it'd at
least serve as an archive.
As for the wiki, if I build it (i.e. set it up and host it), will you come?
:)
Will I read it ? Sure... Will I write for it? Maybe :-) Seriously -
it depends on how much time I have. Of course you can always try to convice
others to write for it too - it'd be great to have notes about configuring
the various operating systems and installing DECnet, for example.
Bob
How about a HECnet wiki that has a quick reference guide and a link to a
mail archive?
I think it's a great idea, but Johnny has always opposed a mail archive
for HECnet. I suppose you could always just archive a copy of the messages
yourself, but that seems silly. We should just use a mailing list manager
(e.g. GNU mailman) that has a web interface and an archive. If you can get
it past Johnny, then go for it.
Bob
Yeah, it's a problem between the linux mail-11 daemon and my software. Please kill the mail if you can.
Sampsa
On 19 Mar 2015, at 23:07, Robert Armstrong <bob at jfcl.com> wrote:
BTW - for Sampsa, the node PYFFLE doesn't seem to be reachable from
LEGATO. Your email is hung in the queue waiting.
Bob
On 19 Mar 2015, at 22:56, Robert Armstrong <bob at jfcl.com> wrote:
That is very cool. I didn't know about it either.
It's been discussed several times on this list. We really need a "HECnet
wiki", "HECnet quick reference guide", or at least a mail archive!
How about a HECnet wiki that has a quick reference guide and a link to a mail archive?
My hosting provider provides one-click installs of MediaWiki that they maintain for you, it's not a lot of effort (I'm volunteering here).
Sampsa
HECnet guide on NOTES
Ibviously the how-to for NOTES would be in NOTES
Sent from my iPhone
On Mar 19, 2015, at 18:56, Robert Armstrong <bob at jfcl.com> wrote:
That is very cool. I didn't know about it either.
It's been discussed several times on this list. We really need a "HECnet
wiki", "HECnet quick reference guide", or at least a mail archive!
Bob
That is very cool. I didn't know about it either.
It's been discussed several times on this list. We really need a "HECnet
wiki", "HECnet quick reference guide", or at least a mail archive!
Bob
You can subscribe any number of addresses you want.
Yes, running this list on HECnet itself would be cool, and might eventually happen. But at the same time, moving a "known" address is always a bad thing.
I'll eventually get to writing smtp code for RSX. We'll see what happens after that. ;-)
Johnny
On 2015-03-19 21:57, Robert Jarratt wrote:
Can this list support more than one email address? I am tempted to register
my decnet.org address so emails to this list go to my emulated 780 as well.
It has made me setup a proper user account on it now (rather than just use
"system"), so if you like you can reach me on rob at vax780.decnet.org. No
guarantees that I will read it that often though, unless the critical mass
is reached.... :-)
Really though we should run this list on HECnet itself :-) Is there any list
software that runs on VMS? I guess it wouldn't help for recruiting new
people though if the list was off the internet though.
Regards
Rob
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On
Behalf Of Dave McGuire
Sent: 19 March 2015 20:00
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] Mail gateway?
That is very cool. I didn't know about it either. I'm gonna start
using it, I
think. Bob, thank you for running it, and please don't shut it down! :)
-Dave
On 03/19/2015 03:48 PM, Robert Jarratt wrote:
Got the reply in the end. Not sure why it took so long to get to me,
but it made it in the end!
Regards
Rob
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE]
On
Behalf Of Robert Jarratt
Sent: 19 March 2015 19:15
To: hecnet at Update.UU.SE
Subject: RE: [HECnet] Mail gateway?
Oooh, didn't know about that. I tried sending myself an email to
HECnet
and it
worked perfectly. I have just tried a reply but nothing has come
through
yet.
Regards
Rob
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE]
On
Behalf Of Robert Armstrong
Sent: 19 March 2015 16:53
To: hecnet at Update.UU.SE
Subject: RE: [HECnet] Mail gateway?
Yes, LEGATO is running one. You can send mail to
"user at node.decnet.org",
where "user" and "node" are your HECnet node name and your local
user name.
I've been tempted to kill it - it spends most of its time
processing
SPAM
- but for the moment it's still working.
Bob
--
Dave McGuire, AK4HZ/3
New Kensington, PA
On 2015-03-19 17:52, Robert Armstrong wrote:
Yes, LEGATO is running one. You can send mail to "user at node.decnet.org",
where "user" and "node" are your HECnet node name and your local user name.
I've been tempted to kill it - it spends most of its time processing SPAM
- but for the moment it's still working.
I'm actually using the LEGATO:: mail gateway from time to time. Please don't shut it down before I've written a replacement for RSX... :-)
Johnny
Can this list support more than one email address? I am tempted to register
my decnet.org address so emails to this list go to my emulated 780 as well.
It has made me setup a proper user account on it now (rather than just use
"system"), so if you like you can reach me on rob at vax780.decnet.org. No
guarantees that I will read it that often though, unless the critical mass
is reached.... :-)
Really though we should run this list on HECnet itself :-) Is there any list
software that runs on VMS? I guess it wouldn't help for recruiting new
people though if the list was off the internet though.
Regards
Rob
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On
Behalf Of Dave McGuire
Sent: 19 March 2015 20:00
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] Mail gateway?
That is very cool. I didn't know about it either. I'm gonna start
using it, I
think. Bob, thank you for running it, and please don't shut it down! :)
-Dave
On 03/19/2015 03:48 PM, Robert Jarratt wrote:
Got the reply in the end. Not sure why it took so long to get to me,
but it made it in the end!
Regards
Rob
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE]
On
Behalf Of Robert Jarratt
Sent: 19 March 2015 19:15
To: hecnet at Update.UU.SE
Subject: RE: [HECnet] Mail gateway?
Oooh, didn't know about that. I tried sending myself an email to
HECnet
and it
worked perfectly. I have just tried a reply but nothing has come
through
yet.
Regards
Rob
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE]
On
Behalf Of Robert Armstrong
Sent: 19 March 2015 16:53
To: hecnet at Update.UU.SE
Subject: RE: [HECnet] Mail gateway?
Yes, LEGATO is running one. You can send mail to
"user at node.decnet.org",
where "user" and "node" are your HECnet node name and your local
user name.
I've been tempted to kill it - it spends most of its time
processing
SPAM
- but for the moment it's still working.
Bob
--
Dave McGuire, AK4HZ/3
New Kensington, PA
That is very cool. I didn't know about it either. I'm gonna start
using it, I think. Bob, thank you for running it, and please don't shut
it down! :)
-Dave
On 03/19/2015 03:48 PM, Robert Jarratt wrote:
Got the reply in the end. Not sure why it took so long to get to me, but it
made it in the end!
Regards
Rob
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On
Behalf Of Robert Jarratt
Sent: 19 March 2015 19:15
To: hecnet at Update.UU.SE
Subject: RE: [HECnet] Mail gateway?
Oooh, didn't know about that. I tried sending myself an email to HECnet
and it
worked perfectly. I have just tried a reply but nothing has come through
yet.
Regards
Rob
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE]
On
Behalf Of Robert Armstrong
Sent: 19 March 2015 16:53
To: hecnet at Update.UU.SE
Subject: RE: [HECnet] Mail gateway?
Yes, LEGATO is running one. You can send mail to
"user at node.decnet.org",
where "user" and "node" are your HECnet node name and your local user
name.
I've been tempted to kill it - it spends most of its time processing
SPAM
- but for the moment it's still working.
Bob
--
Dave McGuire, AK4HZ/3
New Kensington, PA
