- HECnet - lists @ Update

by wonko＠4amlunch.net

On Jul 2, 2013, at 9:18, <Paul_Koning at Dell.com> wrote: On Jul 1, 2013, at 10:28 PM, Cory Smelosky wrote: On Mon, 2 Jul 2013, Tim Sneddon wrote: On Tue, Jul 2, 2013 at 10:19 AM, Cory Smelosky <b4 at gewt.net> wrote: On Mon, 2 Jul 2013, Tim Sneddon wrote: If you're going to have a GRE tunnel between your two sites, why not just route IP over that? Regards, Tim. IPSec. ;) True, but your DECnet links are not protected by encryption... Regards, Tim. Who's to say it can't be? ;) Clearly it could be. IPSec can protect anything that uses IP, so obviously that includes GRE. Which is exactly how you do it, actually. :) -brian

12 years, 1 month

1
0
0 0

New addition to Cisco mesh

by Paul_Koning＠Dell.com

On Jul 1, 2013, at 10:28 PM, Cory Smelosky wrote: On Mon, 2 Jul 2013, Tim Sneddon wrote: On Tue, Jul 2, 2013 at 10:19 AM, Cory Smelosky <b4 at gewt.net> wrote: On Mon, 2 Jul 2013, Tim Sneddon wrote: If you're going to have a GRE tunnel between your two sites, why not just route IP over that? Regards, Tim. IPSec. ;) True, but your DECnet links are not protected by encryption... Regards, Tim. Who's to say it can't be? ;) Clearly it could be. IPSec can protect anything that uses IP, so obviously that includes GRE. paul

12 years, 1 month

1
0
0 0

New addition to Cisco mesh

by b4＠gewt.net

On Mon, 2 Jul 2013, Cory Smelosky wrote: Ahhhhhhh. Yeah. I don't like to give up on a task. I once spent a year off-and-on trying to get a site-to-site VPN to work properly. I eventually switched software and re-did the config and got it working. We DID try vendor support though (we tried every other option). That failed as the vendor support misunderstood our question. I eventually gave up and tried a different vendor-agnostic approach. ;) I also doubt the Suits would hire someone that solves dependency hell on /AIX/ with this: http://gewt.net/installdeps.sh.txt -- Cory Smelosky http://gewt.net Personal stuff http://gimme-sympathy.org Projects

12 years, 1 month

1
0
0 0

Anyone going to Silicon Dreams in the UK this weekend?

by mark＠wickensonline.co.uk

It's kind of VCF-GB 2013 with other stuff going on, in Leicestershire. I'm taking the family as Simon the organiser has tried to make it very family friendly. I was originally down to exhibit but RL has totally got in the way with that pipe-dream. Also please note that retrochallenge.org has just started the Summer Competition. Still time to enter. Regards, Mark.

12 years, 1 month

1
0
0 0

New addition to Cisco mesh

by b4＠gewt.net

On Mon, 2 Jul 2013, Dave McGuire wrote: But you found it. One thing that you may not have run into yet is that, in situations like that, 99% of the "I.T." people out there would never have figured it out, and after ten minutes of googling, would have called vendor support. That's why vendor support, as useless as it is to people who know what they're doing, is so popular amongst suitly companies...so they can hire cheap I.T. people who don't know what they're doing. -Dave Ahhhhhhh. Yeah. I don't like to give up on a task. I once spent a year off-and-on trying to get a site-to-site VPN to work properly. I eventually switched software and re-did the config and got it working. We DID try vendor support though (we tried every other option). That failed as the vendor support misunderstood our question. I eventually gave up and tried a different vendor-agnostic approach. ;) -- Cory Smelosky http://gewt.net Personal stuff http://gimme-sympathy.org Projects

12 years, 1 month

1
0
0 0

New addition to Cisco mesh

by mcguire＠neurotica.com

On 07/01/2013 10:37 PM, Cory Smelosky wrote: On Mon, 2 Jul 2013, Dave McGuire wrote: Yep, that'd do it. Good sleuthing. -Dave Good sleuthing wouldn't have taken hours to find that. ;) But you found it. One thing that you may not have run into yet is that, in situations like that, 99% of the "I.T." people out there would never have figured it out, and after ten minutes of googling, would have called vendor support. That's why vendor support, as useless as it is to people who know what they're doing, is so popular amongst suitly companies...so they can hire cheap I.T. people who don't know what they're doing. -Dave -- Dave McGuire, AK4HZ New Kensington, PA

12 years, 1 month

1
0
0 0

New addition to Cisco mesh

by b4＠gewt.net

On Mon, 2 Jul 2013, Dave McGuire wrote: Yep, that'd do it. Good sleuthing. -Dave Good sleuthing wouldn't have taken hours to find that. ;) -- Cory Smelosky http://gewt.net Personal stuff http://gimme-sympathy.org Projects

12 years, 1 month

1
0
0 0

New addition to Cisco mesh

by b4＠gewt.net

On Mon, 2 Jul 2013, Dave McGuire wrote: On 07/01/2013 09:53 PM, Cory Smelosky wrote: Is this an issue with 12.4? I'm running 12.4.. Which version of 12.4? 12.4(10a), C7200-JK9O3S-M That's a ways older than my version! (I think...I don't quite understand cisco versioning yet) co IOS Software, 7200 Software (C7200-JK9O3S-M), Version 12.4(25d), RELEASE SOFTWARE (fc1) -Dave -- Cory Smelosky http://gewt.net Personal stuff http://gimme-sympathy.org Projects

12 years, 1 month

1
0
0 0

New addition to Cisco mesh

by mcguire＠neurotica.com

On 07/01/2013 09:57 PM, Cory Smelosky wrote: IP and DECnet can definitely co-exist. I run them together on my router, IOS 10.3. The problem is likely with your configuration. If you need some help, post the config. Regards, Tim. Found the problem. I forgot to configure a default gateway. ...For the THIRD TIME today. Yep, that'd do it. Good sleuthing. -Dave -- Dave McGuire, AK4HZ New Kensington, PA

12 years, 1 month

1
0
0 0

New addition to Cisco mesh

by mcguire＠neurotica.com

On 07/01/2013 09:53 PM, Cory Smelosky wrote: Is this an issue with 12.4? I'm running 12.4.. Which version of 12.4? 12.4(10a), C7200-JK9O3S-M -Dave -- Dave McGuire, AK4HZ New Kensington, PA

12 years, 1 month

1
0
0 0

New addition to Cisco mesh

by b4＠gewt.net

On Mon, 2 Jul 2013, Tim Sneddon wrote: On Tue, Jul 2, 2013 at 10:19 AM, Cory Smelosky <b4 at gewt.net> wrote: On Mon, 2 Jul 2013, Tim Sneddon wrote: If you're going to have a GRE tunnel between your two sites, why not just route IP over that? Regards, Tim. IPSec. ;) True, but your DECnet links are not protected by encryption... Regards, Tim. Who's to say it can't be? ;) -- Cory Smelosky http://gewt.net Personal stuff http://gimme-sympathy.org Projects

12 years, 1 month

1
0
0 0

New addition to Cisco mesh

by gregg.drwho8＠gmail.com

On Mon, Jul 1, 2013 at 10:19 PM, Cory Smelosky <b4 at gewt.net> wrote: On Mon, 2 Jul 2013, Tim Sneddon wrote: If you're going to have a GRE tunnel between your two sites, why not just route IP over that? Regards, Tim. IPSec. ;) -- Cory Smelosky http://gewt.net Personal stuff http://gimme-sympathy.org Projects Hello! I imagine you _did_ notice the comments concerning the monster support issue? ----- Gregg C Levine gregg.drwho8 at gmail.com "This signature fought the Time Wars, time and again."

12 years, 1 month

1
0
0 0

New addition to Cisco mesh

by tim＠sneddon.id.au

On Tue, Jul 2, 2013 at 10:19 AM, Cory Smelosky <b4 at gewt.net> wrote: On Mon, 2 Jul 2013, Tim Sneddon wrote: If you're going to have a GRE tunnel between your two sites, why not just route IP over that? Regards, Tim. IPSec. ;) True, but your DECnet links are not protected by encryption... Regards, Tim.

12 years, 1 month

1
0
0 0

New addition to Cisco mesh

by b4＠gewt.net

On Mon, 2 Jul 2013, Tim Sneddon wrote: If you're going to have a GRE tunnel between your two sites, why not just route IP over that? Regards, Tim. IPSec. ;) -- Cory Smelosky http://gewt.net Personal stuff http://gimme-sympathy.org Projects

12 years, 1 month

1
0
0 0

New addition to Cisco mesh

by tim＠sneddon.id.au

On Tue, Jul 2, 2013 at 10:02 AM, Cory Smelosky <b4 at gewt.net> wrote: On Mon, 2 Jul 2013, Tim Sneddon wrote: On Tue, Jul 2, 2013 at 9:57 AM, Cory Smelosky <b4 at gewt.net> wrote: On Mon, 2 Jul 2013, Tim Sneddon wrote: IP and DECnet can definitely co-exist. I run them together on my router, IOS 10.3. The problem is likely with your configuration. If you need some help, post the config. Regards, Tim. Found the problem. I forgot to configure a default gateway. ...For the THIRD TIME today. Without routing protocols running, that will definitely do it. Regards, Tim. Yup. ;) Now to figure out why the VPN with Connor isn't working! If you're going to have a GRE tunnel between your two sites, why not just route IP over that? Regards, Tim.

12 years, 1 month

1
0
0 0

New addition to Cisco mesh

by gregg.drwho8＠gmail.com

On Mon, Jul 1, 2013 at 10:02 PM, Cory Smelosky <b4 at gewt.net> wrote: On Mon, 2 Jul 2013, Tim Sneddon wrote: On Tue, Jul 2, 2013 at 9:57 AM, Cory Smelosky <b4 at gewt.net> wrote: On Mon, 2 Jul 2013, Tim Sneddon wrote: IP and DECnet can definitely co-exist. I run them together on my router, IOS 10.3. The problem is likely with your configuration. If you need some help, post the config. Regards, Tim. Found the problem. I forgot to configure a default gateway. ...For the THIRD TIME today. Without routing protocols running, that will definitely do it. Regards, Tim. Yup. ;) Now to figure out why the VPN with Connor isn't working! -- Cory Smelosky http://gewt.net Personal stuff http://gimme-sympathy.org Projects Hello! Obvious, isn't it? You forgot to request the free monster support. ----- Gregg C Levine gregg.drwho8 at gmail.com "This signature fought the Time Wars, time and again."

12 years, 1 month

1
0
0 0

New addition to Cisco mesh

by b4＠gewt.net

On Mon, 2 Jul 2013, Tim Sneddon wrote: On Tue, Jul 2, 2013 at 9:57 AM, Cory Smelosky <b4 at gewt.net> wrote: On Mon, 2 Jul 2013, Tim Sneddon wrote: IP and DECnet can definitely co-exist. I run them together on my router, IOS 10.3. The problem is likely with your configuration. If you need some help, post the config. Regards, Tim. Found the problem. I forgot to configure a default gateway. ...For the THIRD TIME today. Without routing protocols running, that will definitely do it. Regards, Tim. Yup. ;) Now to figure out why the VPN with Connor isn't working! -- Cory Smelosky http://gewt.net Personal stuff http://gimme-sympathy.org Projects

12 years, 1 month

1
0
0 0

New addition to Cisco mesh

by tim＠sneddon.id.au

On Tue, Jul 2, 2013 at 9:57 AM, Cory Smelosky <b4 at gewt.net> wrote: On Mon, 2 Jul 2013, Tim Sneddon wrote: IP and DECnet can definitely co-exist. I run them together on my router, IOS 10.3. The problem is likely with your configuration. If you need some help, post the config. Regards, Tim. Found the problem. I forgot to configure a default gateway. ...For the THIRD TIME today. Without routing protocols running, that will definitely do it. Regards, Tim.

12 years, 1 month

1
0
0 0

New addition to Cisco mesh

by b4＠gewt.net

On Mon, 2 Jul 2013, Tim Sneddon wrote: IP and DECnet can definitely co-exist. I run them together on my router, IOS 10.3. The problem is likely with your configuration. If you need some help, post the config. Regards, Tim. Found the problem. I forgot to configure a default gateway. ...For the THIRD TIME today. -- Cory Smelosky http://gewt.net Personal stuff http://gimme-sympathy.org Projects

12 years, 1 month

1
0
0 0

New addition to Cisco mesh

by gregg.drwho8＠gmail.com

On Mon, Jul 1, 2013 at 9:53 PM, Cory Smelosky <b4 at gewt.net> wrote: On Mon, 2 Jul 2013, Dave McGuire wrote: On 07/01/2013 09:45 PM, Cory Smelosky wrote: Following up on this...can I not enable DECnet routing and IP routing at the same time? Of course you can. That's what I thought. If I enable IP routing...DECnet stops working...so to have DECnet I can't have IP routing. That's pretty odd. I'm running both here, with no trouble. I'll see if I'm missing something dumb in my config. It's possible I only half-enabled both. Is this an issue with 12.4? I'm running 12.4.. Which version of 12.4? -Dave -- Cory Smelosky http://gewt.net Personal stuff http://gimme-sympathy.org Projects Hello! He's running the one with free monster support. ----- Gregg C Levine gregg.drwho8 at gmail.com "This signature fought the Time Wars, time and again."

12 years, 1 month

1
0
0 0

New addition to Cisco mesh

by gregg.drwho8＠gmail.com

On Mon, Jul 1, 2013 at 9:50 PM, Dave McGuire <mcguire at neurotica.com> wrote: On 07/01/2013 09:45 PM, Cory Smelosky wrote: Following up on this...can I not enable DECnet routing and IP routing at the same time? Of course you can. If I enable IP routing...DECnet stops working...so to have DECnet I can't have IP routing. That's pretty odd. I'm running both here, with no trouble. Is this an issue with 12.4? I'm running 12.4.. -Dave -- Dave McGuire, AK4HZ New Kensington, PA Hello! It even comes with free monster support. -- ----- Gregg C Levine gregg.drwho8 at gmail.com "This signature fought the Time Wars, time and again."

12 years, 1 month

1
0
0 0

New addition to Cisco mesh

by tim＠sneddon.id.au

On Tue, Jul 2, 2013 at 9:45 AM, Cory Smelosky <b4 at gewt.net> wrote: On Mon, 1 Jul 2013, Cory Smelosky wrote: Afternoon all, Connor's gonna join the Cisco mesh, I'll be getting his stuff configured and prepared for autoupdate. He's area 32 (iirc...can't recall for certain off hand) and his IP is 71.70.225.96. It's fairly static. (hasn't changed in years). Brian, get him added and I'll take care of the rest. Following up on this...can I not enable DECnet routing and IP routing at the same time? If I enable IP routing...DECnet stops working...so to have DECnet I can't have IP routing. Is this an issue with 12.4? IP and DECnet can definitely co-exist. I run them together on my router, IOS 10.3. The problem is likely with your configuration. If you need some help, post the config. Regards, Tim.

12 years, 1 month

1
0
0 0

New addition to Cisco mesh

by b4＠gewt.net

On Mon, 2 Jul 2013, Dave McGuire wrote: On 07/01/2013 09:45 PM, Cory Smelosky wrote: Following up on this...can I not enable DECnet routing and IP routing at the same time? Of course you can. That's what I thought. If I enable IP routing...DECnet stops working...so to have DECnet I can't have IP routing. That's pretty odd. I'm running both here, with no trouble. I'll see if I'm missing something dumb in my config. It's possible I only half-enabled both. Is this an issue with 12.4? I'm running 12.4.. Which version of 12.4? -Dave -- Cory Smelosky http://gewt.net Personal stuff http://gimme-sympathy.org Projects

12 years, 1 month

1
0
0 0

New addition to Cisco mesh

by mcguire＠neurotica.com

On 07/01/2013 09:45 PM, Cory Smelosky wrote: Following up on this...can I not enable DECnet routing and IP routing at the same time? Of course you can. If I enable IP routing...DECnet stops working...so to have DECnet I can't have IP routing. That's pretty odd. I'm running both here, with no trouble. Is this an issue with 12.4? I'm running 12.4.. -Dave -- Dave McGuire, AK4HZ New Kensington, PA

12 years, 1 month

1
0
0 0

New addition to Cisco mesh

by tim＠sneddon.id.au

On Mon, 1 Jul 2013, Cory Smelosky wrote: Afternoon all, Connor's gonna join the Cisco mesh, I'll be getting his stuff configured and prepared for autoupdate. He's area 32 (iirc...can't recall for certain off hand) and his IP is 71.70.225.96. It's fairly static. (hasn't changed in years). Brian, get him added and I'll take care of the rest. Following up on this...can I not enable DECnet routing and IP routing at the same time? If I enable IP routing...DECnet stops working...so to have DECnet I can't have IP routing. Is this an issue with 12.4? -- Cory Smelosky http://gewt.net Personal stuff http://gimme-sympathy.org Projects

12 years, 1 month

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

HECnet