- HECnet - lists @ Update

by mark＠wickensonline.co.uk

On 10/09/2013 09:39, Sampsa Laine wrote: Yeah, typo, sorry guys. That looks like a nifty system though.. sampsa <sampsa at mac.com> mobile +358 40 7208932 On 10 Sep 2013, at 10:33, Sampsa Laine <sampsa at mac.com> wrote: http://www.ebay.co.uk/itm/Dec-Digital-Alpha-21164-500-Mhz-PICMG-DMCC-Indust… No bids and it's pretty low priced for now.. sampsa <sampsa at mac.com> mobile +358 40 7208932 I just bought one ;) The plan being to convert it into a 'briefcase' system... Mark.

11 years, 11 months

1
0
0 0

If you're in the US, check this out

by sampsa＠mac.com

Yeah, typo, sorry guys. That looks like a nifty system though.. sampsa <sampsa at mac.com> mobile +358 40 7208932 On 10 Sep 2013, at 10:33, Sampsa Laine <sampsa at mac.com> wrote: http://www.ebay.co.uk/itm/Dec-Digital-Alpha-21164-500-Mhz-PICMG-DMCC-Indust… No bids and it's pretty low priced for now.. sampsa <sampsa at mac.com> mobile +358 40 7208932

11 years, 11 months

1
0
0 0

If you're in the US, check this out

by b4＠gewt.net

On Tue, 10 Sep 2013, Sampsa Laine wrote: http://www.ebay.co.uk/itm/Dec-Digital-Alpha-21164-500-Mhz-PICMG-DMCC-Indust… No bids and it's pretty low priced for now.. sampsa <sampsa at mac.com> mobile +358 40 7208932 You mean the UK? They don't seem to ship to the US. -- Cory Smelosky http://gewt.net Personal stuff http://gimme-sympathy.org Projects

11 years, 11 months

1
0
0 0

If you're in the US, check this out

by sampsa＠mac.com

http://www.ebay.co.uk/itm/Dec-Digital-Alpha-21164-500-Mhz-PICMG-DMCC-Indust… No bids and it's pretty low priced for now.. sampsa <sampsa at mac.com> mobile +358 40 7208932

11 years, 11 months

1
0
0 0

Slightly OT - USB serial controllers that work in Linux?

by sampsa＠mac.com

So I'm toying with the idea of putting a Raspberry Pi + LCD screen + keyboard into an old Intertec (?) SuperBrain case, for use as a beefed up terminal (basically have it boot Linux, run SIMH and load VMS or something). Any of you guys got a recommendation as to what USB-serial adapter works best in Linux? sampsa <sampsa at mac.com> mobile +358 40 7208932

11 years, 11 months

1
0
0 0

VAX-11 software repository

by b4＠gewt.net

On Tue, 10 Sep 2013, G. wrote: Hi all! :) Someone pointed me to http://iamvirtual.ca/VAX11/VAX-11-software.html Is that a known site I wasn't aware of or is it new to you too? I wonder if all those goodies have just surfaced or already available in the wild... G. I wonder if those diag tapes are old enough that I can use them to install VAX/VMS 1.5 using its standalone DSC. -- Cory Smelosky http://gewt.net Personal stuff http://gimme-sympathy.org Projects

11 years, 11 months

1
0
0 0

VAX-11 software repository

by gerry77＠mail.com

Hi all! :) Someone pointed me to http://iamvirtual.ca/VAX11/VAX-11-software.html Is that a known site I wasn't aware of or is it new to you too? I wonder if all those goodies have just surfaced or already available in the wild... G.

11 years, 11 months

1
0
0 0

Phase V specs

by Paul_Koning＠Dell.com

"ps2pdf" was suggested -- it works. So the answer is that some of them can be converted with Distiller (which seems to be the best answer when it works) and the rest with ps2pdf. See below for the details. paul On Sep 9, 2013, at 3:48 PM, Paul Koning <Paul_Koning at dell.com> wrote: Thanks for the suggestion. The answer is yes, that works fine. Adobe Distiller handled these: entity_model_v1.0.0.pdf ethernet-registry-internal.pdf event_v1.0.0_cover.pdf lan_node_external_v2.0.2.pdf lan_node_v2.0.2.pdf mop-registry-internal.pdf mop_v4.0.0.pdf ncl_v1.0.0.pdf netman_v5.0.0.pdf time_v1.0.0.pdf trn_dlspec_v100.pdf I just tried uid_v1.0.0.ps with ps2pdf and that produces good output. I then tried the remaining ones, and from a quick look I'd say they are all good. paul

11 years, 11 months

1
0
0 0

Phase V specs

by mcguire＠neurotica.com

Can you send me the filename of one that doesn't convert properly? -Dave On 09/09/2013 03:23 PM, Paul_Koning at Dell.com wrote: I have a copy. I'll forward this to Al. BTW, I spoke too soon when I said they convert fine to PDF. About half do. The other half produce blank pages. The reason appears to be that Distiller can't cope with LaTeX output that uses bitmap fonts, which a number of those specs use. paul On Sep 9, 2013, at 3:15 PM, Jarratt RMA <robert.jarratt at ntlworld.com<mailto:robert.jarratt at ntlworld.com>> wrote: That is really interesting, I will download the lot when I get home at the end of the week. Have you got a copy in case it disappears before then? Have you sent a link to Al Kossow at bitsavers? Regards Rob On 9 September 2013 18:03, <Paul_Koning at dell.com<mailto:Paul_Koning at dell.com>> wrote: Gents, A kind former colleague sent me a copy of the Phase V Routing spec. The cover listed the order number for that document (which looked nothing like what I remembered). Google found a few hits for that string. One of the hits is an FTP server: ftp://avaloni.iks-jena.de/mitarb/lutz/standards/DEC/ -- which appears to have the whole set, in PostScript form. Adobe Acrobat Distiller readily converts those to PDF. paul -- Dave McGuire, AK4HZ New Kensington, PA

11 years, 11 months

1
0
0 0

Phase V specs

by Paul_Koning＠Dell.com

I have a copy. I'll forward this to Al. BTW, I spoke too soon when I said they convert fine to PDF. About half do. The other half produce blank pages. The reason appears to be that Distiller can't cope with LaTeX output that uses bitmap fonts, which a number of those specs use. paul On Sep 9, 2013, at 3:15 PM, Jarratt RMA <robert.jarratt at ntlworld.com<mailto:robert.jarratt at ntlworld.com>> wrote: That is really interesting, I will download the lot when I get home at the end of the week. Have you got a copy in case it disappears before then? Have you sent a link to Al Kossow at bitsavers? Regards Rob On 9 September 2013 18:03, <Paul_Koning at dell.com<mailto:Paul_Koning at dell.com>> wrote: Gents, A kind former colleague sent me a copy of the Phase V Routing spec. The cover listed the order number for that document (which looked nothing like what I remembered). Google found a few hits for that string. One of the hits is an FTP server: ftp://avaloni.iks-jena.de/mitarb/lutz/standards/DEC/ -- which appears to have the whole set, in PostScript form. Adobe Acrobat Distiller readily converts those to PDF. paul

11 years, 11 months

1
0
0 0

Phase V specs

by robert.jarratt＠ntlworld.com

That is really interesting, I will download the lot when I get home at the end of the week. Have you got a copy in case it disappears before then? Have you sent a link to Al Kossow at bitsavers? Regards Rob On 9 September 2013 18:03, <Paul_Koning at dell.com> wrote: Gents, A kind former colleague sent me a copy of the Phase V Routing spec. The cover listed the order number for that document (which looked nothing like what I remembered). Google found a few hits for that string. One of the hits is an FTP server: ftp://avaloni.iks-jena.de/mitarb/lutz/standards/DEC/ -- which appears to have the whole set, in PostScript form. Adobe Acrobat Distiller readily converts those to PDF. paul

11 years, 11 months

1
0
0 0

Config Details Required

by wonko＠4amlunch.net

On Sun, Sep 08, 2013 at 11:22:43AM -0400, Dave McGuire wrote: On 09/08/2013 10:23 AM, Mark Darvill wrote: I will be bringing up a new decnet area on hecnet (Area 22) in the near future. Can I please have info on the peering for IP and any other config details that may help. I will be using a DECbrouter 90 (Cisco) V11.1. So, anyone know if the DECrouter will do, and who would be willing to act as a peer? Johnny V11.1 supports GRE, Decnet IV Level 1 and 2 so I am hoping so. :-) Brian can get you hooked up with his automatic meshed-tunnel config generator, when he catches up on list mail. Things have been very busy, but I will try to get this dealt with this week. I'm actually moving everything to a new colo box so this will coincide with everyone needing to change the IP they allow SNMP to come from. Mark, as soon as I've moved everything I'll let you know what you need to do. -brian

11 years, 11 months

1
0
0 0

Phase V specs

by Paul_Koning＠Dell.com

Gents, A kind former colleague sent me a copy of the Phase V Routing spec. The cover listed the order number for that document (which looked nothing like what I remembered). Google found a few hits for that string. One of the hits is an FTP server: ftp://avaloni.iks-jena.de/mitarb/lutz/standards/DEC/ -- which appears to have the whole set, in PostScript form. Adobe Acrobat Distiller readily converts those to PDF. paul

11 years, 11 months

1
0
0 0

Config Details Required

by b4＠gewt.net

On 8 Sep 2013, at 11:58, Robert Jarratt <robert.jarratt at ntlworld.com> wrote: -----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner- hecnet at Update.UU.SE] On Behalf Of Mark Darvill Sent: 08 September 2013 16:19 To: hecnet at Update.UU.SE Subject: Re: [HECnet] Config Details Required On 08/09/2013 15:45, Robert Jarratt wrote: -----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner- hecnet at Update.UU.SE] On Behalf Of Johnny Billquist Sent: 08 September 2013 14:52 To: hecnet at Update.UU.SE Subject: Re: [HECnet] Config Details Required On 2013-09-08 15:48, Mark Darvill wrote: HI, I will be bringing up a new decnet area on hecnet (Area 22) in the near future. Can I please have info on the peering for IP and any other config details that may help. I will be using a DECbrouter 90 (Cisco) V11.1. So, anyone know if the DECrouter will do, and who would be willing to act as a peer? Johnny -- Johnny Billquist || "I'm on a bus || on a psychedelic trip email: bqt at softjar.se || Reading murder books pdp is alive! || tryin' to stay hip" - B. Idol Hmmm... Didn't know much about DECbrouter until I looked it up following these emails. If I have it right (http://manx.classiccmp.org/collections/mds- 199909/cd2/network/decbrom a.pdf) all DECbrouters have only one Ethernet interface and a one or more (depending on model) WAN connections using synchronous serial lines. I am wondering how this could be used on HECnet. I don't think anyone offers any synchronous serial way into HECnet, or am I wrong? That leaves the one Ethernet interface. To be able to use that would need the bridge (or my user mode router, or some other hardware router) to be on the same LAN. But at that point there wouldn't be a lot of point having the DECbrouter as it would not have anything to route. Have I missed something? Is the DECbrouter 90 (Cisco) a different beast? Regards Rob I should be able to set up the DECbrouter 90 as a one armed router behind my main internet Router which is a Cisco 1800. All I need it for is to encapsulate DECnet and then forward it to a peer via my internet connected router. It won't be the highest performance but it will get the Area up, I can then change it at a later date if required. BTW, my Cisco 1800 does not support DECnet or GRE so this is not an option. Does anyone have any peering info or the config used either on a Cisco or DECbrouter. Thanks, Mark Ah, I think I get it now I didn't realise it could do this. So it might be another way for me to get onto HECnet using some real hardware, it might be fun to try that. I have a DEChub to put one of these into. Do all DECbrouter models do this? Or might I need a firmware update? I think I want a DECbrouter to play with now. Regards Rob

11 years, 11 months

1
0
0 0

Config Details Required

by tim＠sneddon.id.au

On 8/09/2013 11:58 PM, Robert Jarratt wrote: -----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner- hecnet at Update.UU.SE] On Behalf Of Mark Darvill Sent: 08 September 2013 16:19 To: hecnet at Update.UU.SE Subject: Re: [HECnet] Config Details Required On 08/09/2013 15:45, Robert Jarratt wrote: -----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner- hecnet at Update.UU.SE] On Behalf Of Johnny Billquist Sent: 08 September 2013 14:52 To: hecnet at Update.UU.SE Subject: Re: [HECnet] Config Details Required On 2013-09-08 15:48, Mark Darvill wrote: HI, I will be bringing up a new decnet area on hecnet (Area 22) in the near future. Can I please have info on the peering for IP and any other config details that may help. I will be using a DECbrouter 90 (Cisco) V11.1. So, anyone know if the DECrouter will do, and who would be willing to act as a peer? Johnny -- Johnny Billquist || "I'm on a bus || on a psychedelic trip email: bqt at softjar.se || Reading murder books pdp is alive! || tryin' to stay hip" - B. Idol Hmmm... Didn't know much about DECbrouter until I looked it up following these emails. If I have it right (http://manx.classiccmp.org/collections/mds- 199909/cd2/network/decbrom a.pdf) all DECbrouters have only one Ethernet interface and a one or more (depending on model) WAN connections using synchronous serial lines. I am wondering how this could be used on HECnet. I don't think anyone offers any synchronous serial way into HECnet, or am I wrong? That leaves the one Ethernet interface. To be able to use that would need the bridge (or my user mode router, or some other hardware router) to be on the same LAN. But at that point there wouldn't be a lot of point having the DECbrouter as it would not have anything to route. Have I missed something? Is the DECbrouter 90 (Cisco) a different beast? Regards Rob I should be able to set up the DECbrouter 90 as a one armed router behind my main internet Router which is a Cisco 1800. All I need it for is to encapsulate DECnet and then forward it to a peer via my internet connected router. It won't be the highest performance but it will get the Area up, I can then change it at a later date if required. BTW, my Cisco 1800 does not support DECnet or GRE so this is not an option. Does anyone have any peering info or the config used either on a Cisco or DECbrouter. Thanks, Mark Ah, I think I get it now I didn't realise it could do this. So it might be another way for me to get onto HECnet using some real hardware, it might be fun to try that. I have a DEChub to put one of these into. Do all DECbrouter models do this? Or might I need a firmware update? Hi Rob, Yeah, the DECbrouters can do it. Cisco say that you need 11.0 as a base to do GRE/IP, but 10.3 works fine. I do have a router with 9.17 loaded, but that is not currently with me. I doubt that it has support for GRE/IP though. You can pick up the IOS images I have here: ftp://ftp.endlesssoftware.com.au/pub/misc/ios or via HTTP: http://ftp.endlesssoftware.com.au/misc/ios Regards, Tim. Regards Rob

11 years, 11 months

1
0
0 0

Config Details Required

by robert.jarratt＠ntlworld.com

-----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner- hecnet at Update.UU.SE] On Behalf Of Mark Darvill Sent: 08 September 2013 16:19 To: hecnet at Update.UU.SE Subject: Re: [HECnet] Config Details Required On 08/09/2013 15:45, Robert Jarratt wrote: -----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner- hecnet at Update.UU.SE] On Behalf Of Johnny Billquist Sent: 08 September 2013 14:52 To: hecnet at Update.UU.SE Subject: Re: [HECnet] Config Details Required On 2013-09-08 15:48, Mark Darvill wrote: HI, I will be bringing up a new decnet area on hecnet (Area 22) in the near future. Can I please have info on the peering for IP and any other config details that may help. I will be using a DECbrouter 90 (Cisco) V11.1. So, anyone know if the DECrouter will do, and who would be willing to act as a peer? Johnny -- Johnny Billquist || "I'm on a bus || on a psychedelic trip email: bqt at softjar.se || Reading murder books pdp is alive! || tryin' to stay hip" - B. Idol Hmmm... Didn't know much about DECbrouter until I looked it up following these emails. If I have it right (http://manx.classiccmp.org/collections/mds- 199909/cd2/network/decbrom a.pdf) all DECbrouters have only one Ethernet interface and a one or more (depending on model) WAN connections using synchronous serial lines. I am wondering how this could be used on HECnet. I don't think anyone offers any synchronous serial way into HECnet, or am I wrong? That leaves the one Ethernet interface. To be able to use that would need the bridge (or my user mode router, or some other hardware router) to be on the same LAN. But at that point there wouldn't be a lot of point having the DECbrouter as it would not have anything to route. Have I missed something? Is the DECbrouter 90 (Cisco) a different beast? Regards Rob I should be able to set up the DECbrouter 90 as a one armed router behind my main internet Router which is a Cisco 1800. All I need it for is to encapsulate DECnet and then forward it to a peer via my internet connected router. It won't be the highest performance but it will get the Area up, I can then change it at a later date if required. BTW, my Cisco 1800 does not support DECnet or GRE so this is not an option. Does anyone have any peering info or the config used either on a Cisco or DECbrouter. Thanks, Mark Ah, I think I get it now I didn't realise it could do this. So it might be another way for me to get onto HECnet using some real hardware, it might be fun to try that. I have a DEChub to put one of these into. Do all DECbrouter models do this? Or might I need a firmware update? Regards Rob

11 years, 11 months

1
0
0 0

Config Details Required

by mcguire＠neurotica.com

On 09/08/2013 11:51 AM, Mark Darvill wrote: On 08/09/2013 16:32, Dave McGuire wrote: On 09/08/2013 11:18 AM, Mark Darvill wrote: Does anyone have any peering info or the config used either on a Cisco or DECbrouter. I mourn the death of the question mark. Here's an example from my configuration. We'll need to wait for Brian to get you worked into the database though. interface Tunnel54 description HECnet tunnel for Peter Lothberg Reston VA (Area 59) [Version:195] no ip address decnet cost 20 tunnel source BVI1 tunnel destination 199.0.131.2 tunnel path-mtu-discovery -Dave Thanks Dave ? ;) -- Dave McGuire, AK4HZ New Kensington, PA

11 years, 11 months

1
0
0 0

Config Details Required

by mark.darvill＠mac.com

On 08/09/2013 16:32, Dave McGuire wrote: On 09/08/2013 11:18 AM, Mark Darvill wrote: Does anyone have any peering info or the config used either on a Cisco or DECbrouter. I mourn the death of the question mark. Here's an example from my configuration. We'll need to wait for Brian to get you worked into the database though. interface Tunnel54 description HECnet tunnel for Peter Lothberg Reston VA (Area 59) [Version:195] no ip address decnet cost 20 tunnel source BVI1 tunnel destination 199.0.131.2 tunnel path-mtu-discovery -Dave Thanks Dave ? Mark

11 years, 11 months

1
0
0 0

Config Details Required

by mark.darvill＠mac.com

On 08/09/2013 16:29, Tim Sneddon wrote: On 8/09/2013 11:18 PM, Mark Darvill wrote: On 08/09/2013 15:45, Robert Jarratt wrote: -----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner- hecnet at Update.UU.SE] On Behalf Of Johnny Billquist Sent: 08 September 2013 14:52 To: hecnet at Update.UU.SE Subject: Re: [HECnet] Config Details Required On 2013-09-08 15:48, Mark Darvill wrote: HI, I will be bringing up a new decnet area on hecnet (Area 22) in the near future. Can I please have info on the peering for IP and any other config details that may help. I will be using a DECbrouter 90 (Cisco) V11.1. So, anyone know if the DECrouter will do, and who would be willing to act as a peer? Johnny -- Johnny Billquist || "I'm on a bus || on a psychedelic trip email: bqt at softjar.se || Reading murder books pdp is alive! || tryin' to stay hip" - B. Idol Hmmm... Didn't know much about DECbrouter until I looked it up following these emails. If I have it right (http://manx.classiccmp.org/collections/mds-199909/cd2/network/decbroma.pdf) all DECbrouters have only one Ethernet interface and a one or more (depending on model) WAN connections using synchronous serial lines. I am wondering how this could be used on HECnet. I don't think anyone offers any synchronous serial way into HECnet, or am I wrong? That leaves the one Ethernet interface. To be able to use that would need the bridge (or my user mode router, or some other hardware router) to be on the same LAN. But at that point there wouldn't be a lot of point having the DECbrouter as it would not have anything to route. Have I missed something? Is the DECbrouter 90 (Cisco) a different beast? Regards Rob I should be able to set up the DECbrouter 90 as a one armed router behind my main internet Router which is a Cisco 1800. All I need it for is to encapsulate DECnet and then forward it to a peer via my internet connected router. It won't be the highest performance but it will get the Area up, I can then change it at a later date if required. BTW, my Cisco 1800 does not support DECnet or GRE so this is not an option. Does anyone have any peering info or the config used either on a Cisco or DECbrouter. Hi Mark, I have a Cisco 857 which provides my connection to the 'net. I have the following NAT rules on my Cisco 867 (gatekeeper) to pass GRE/IP packets through to my DECbrouter 90T2: interface Vlan1 ip address 172.17.111.254 255.255.255.0 ip nat inside interface Dialer0 ip nat outside ip nat inside source static tcp 172.17.111.251 1723 interface Dialer0 1723 Then on my DECbrouter 90T2 (a12rtr) I just set up the tunnels, like so: interface Tunnel52 description HECnet tunnel for ... no ip address decnet cost 20 tunnel source Ethernet0 tunnel destination .... However, as Dave pointed out (and I said earlier) when Brian catches up with the list he can add you to the mesh and you will receive all the configuration details from him. I am also likely able to track down a version of the Cisco 1800 IOS that can do DECnet and GRE/IP (if you're interested). Regards, Tim. Hi Tim, Yes would be very interested if you can find an image, that would allow me to have the DECbrouter purely as an L1/L2 router for playing with and leave the 1800 for the permanent peer links. Thanks, Mark

11 years, 11 months

1
0
0 0

Config Details Required

by mcguire＠neurotica.com

On 09/08/2013 11:18 AM, Mark Darvill wrote: Does anyone have any peering info or the config used either on a Cisco or DECbrouter. I mourn the death of the question mark. Here's an example from my configuration. We'll need to wait for Brian to get you worked into the database though. interface Tunnel54 description HECnet tunnel for Peter Lothberg Reston VA (Area 59) [Version:195] no ip address decnet cost 20 tunnel source BVI1 tunnel destination 199.0.131.2 tunnel path-mtu-discovery -Dave -- Dave McGuire, AK4HZ New Kensington, PA

11 years, 11 months

1
0
0 0

Config Details Required

by tim＠sneddon.id.au

On 8/09/2013 11:18 PM, Mark Darvill wrote: On 08/09/2013 15:45, Robert Jarratt wrote: -----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner- hecnet at Update.UU.SE] On Behalf Of Johnny Billquist Sent: 08 September 2013 14:52 To: hecnet at Update.UU.SE Subject: Re: [HECnet] Config Details Required On 2013-09-08 15:48, Mark Darvill wrote: HI, I will be bringing up a new decnet area on hecnet (Area 22) in the near future. Can I please have info on the peering for IP and any other config details that may help. I will be using a DECbrouter 90 (Cisco) V11.1. So, anyone know if the DECrouter will do, and who would be willing to act as a peer? Johnny -- Johnny Billquist || "I'm on a bus || on a psychedelic trip email: bqt at softjar.se || Reading murder books pdp is alive! || tryin' to stay hip" - B. Idol Hmmm... Didn't know much about DECbrouter until I looked it up following these emails. If I have it right (http://manx.classiccmp.org/collections/mds-199909/cd2/network/decbroma.pdf) all DECbrouters have only one Ethernet interface and a one or more (depending on model) WAN connections using synchronous serial lines. I am wondering how this could be used on HECnet. I don't think anyone offers any synchronous serial way into HECnet, or am I wrong? That leaves the one Ethernet interface. To be able to use that would need the bridge (or my user mode router, or some other hardware router) to be on the same LAN. But at that point there wouldn't be a lot of point having the DECbrouter as it would not have anything to route. Have I missed something? Is the DECbrouter 90 (Cisco) a different beast? Regards Rob I should be able to set up the DECbrouter 90 as a one armed router behind my main internet Router which is a Cisco 1800. All I need it for is to encapsulate DECnet and then forward it to a peer via my internet connected router. It won't be the highest performance but it will get the Area up, I can then change it at a later date if required. BTW, my Cisco 1800 does not support DECnet or GRE so this is not an option. Does anyone have any peering info or the config used either on a Cisco or DECbrouter. Hi Mark, I have a Cisco 857 which provides my connection to the 'net. I have the following NAT rules on my Cisco 867 (gatekeeper) to pass GRE/IP packets through to my DECbrouter 90T2: interface Vlan1 ip address 172.17.111.254 255.255.255.0 ip nat inside interface Dialer0 ip nat outside ip nat inside source static tcp 172.17.111.251 1723 interface Dialer0 1723 Then on my DECbrouter 90T2 (a12rtr) I just set up the tunnels, like so: interface Tunnel52 description HECnet tunnel for ... no ip address decnet cost 20 tunnel source Ethernet0 tunnel destination .... However, as Dave pointed out (and I said earlier) when Brian catches up with the list he can add you to the mesh and you will receive all the configuration details from him. I am also likely able to track down a version of the Cisco 1800 IOS that can do DECnet and GRE/IP (if you're interested). Regards, Tim.

11 years, 11 months

1
0
0 0

Config Details Required

by mcguire＠neurotica.com

On 09/08/2013 10:23 AM, Mark Darvill wrote: I will be bringing up a new decnet area on hecnet (Area 22) in the near future. Can I please have info on the peering for IP and any other config details that may help. I will be using a DECbrouter 90 (Cisco) V11.1. So, anyone know if the DECrouter will do, and who would be willing to act as a peer? Johnny V11.1 supports GRE, Decnet IV Level 1 and 2 so I am hoping so. :-) Brian can get you hooked up with his automatic meshed-tunnel config generator, when he catches up on list mail. -Dave -- Dave McGuire, AK4HZ New Kensington, PA

11 years, 11 months

1
0
0 0

Config Details Required

by bqt＠softjar.se

On 2013-09-08 16:45, Robert Jarratt wrote: -----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner- hecnet at Update.UU.SE] On Behalf Of Johnny Billquist Sent: 08 September 2013 14:52 To: hecnet at Update.UU.SE Subject: Re: [HECnet] Config Details Required On 2013-09-08 15:48, Mark Darvill wrote: HI, I will be bringing up a new decnet area on hecnet (Area 22) in the near future. Can I please have info on the peering for IP and any other config details that may help. I will be using a DECbrouter 90 (Cisco) V11.1. So, anyone know if the DECrouter will do, and who would be willing to act as a peer? Johnny -- Johnny Billquist || "I'm on a bus || on a psychedelic trip email: bqt at softjar.se || Reading murder books pdp is alive! || tryin' to stay hip" - B. Idol Hmmm... Didn't know much about DECbrouter until I looked it up following these emails. If I have it right (http://manx.classiccmp.org/collections/mds-199909/cd2/network/decbroma.pdf) all DECbrouters have only one Ethernet interface and a one or more (depending on model) WAN connections using synchronous serial lines. I am wondering how this could be used on HECnet. I don't think anyone offers any synchronous serial way into HECnet, or am I wrong? That leaves the one Ethernet interface. To be able to use that would need the bridge (or my user mode router, or some other hardware router) to be on the same LAN. But at that point there wouldn't be a lot of point having the DECbrouter as it would not have anything to route. Have I missed something? Is the DECbrouter 90 (Cisco) a different beast? You seemed to have disregarded the possibility of the DECbrouter doing the same thing your user mode router do... :-) Johnny -- Johnny Billquist || "I'm on a bus || on a psychedelic trip email: bqt at softjar.se || Reading murder books pdp is alive! || tryin' to stay hip" - B. Idol

11 years, 11 months

1
0
0 0

Config Details Required

by mark.darvill＠mac.com

On 08/09/2013 15:45, Robert Jarratt wrote: -----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner- hecnet at Update.UU.SE] On Behalf Of Johnny Billquist Sent: 08 September 2013 14:52 To: hecnet at Update.UU.SE Subject: Re: [HECnet] Config Details Required On 2013-09-08 15:48, Mark Darvill wrote: HI, I will be bringing up a new decnet area on hecnet (Area 22) in the near future. Can I please have info on the peering for IP and any other config details that may help. I will be using a DECbrouter 90 (Cisco) V11.1. So, anyone know if the DECrouter will do, and who would be willing to act as a peer? Johnny -- Johnny Billquist || "I'm on a bus || on a psychedelic trip email: bqt at softjar.se || Reading murder books pdp is alive! || tryin' to stay hip" - B. Idol Hmmm... Didn't know much about DECbrouter until I looked it up following these emails. If I have it right (http://manx.classiccmp.org/collections/mds-199909/cd2/network/decbroma.pdf) all DECbrouters have only one Ethernet interface and a one or more (depending on model) WAN connections using synchronous serial lines. I am wondering how this could be used on HECnet. I don't think anyone offers any synchronous serial way into HECnet, or am I wrong? That leaves the one Ethernet interface. To be able to use that would need the bridge (or my user mode router, or some other hardware router) to be on the same LAN. But at that point there wouldn't be a lot of point having the DECbrouter as it would not have anything to route. Have I missed something? Is the DECbrouter 90 (Cisco) a different beast? Regards Rob I should be able to set up the DECbrouter 90 as a one armed router behind my main internet Router which is a Cisco 1800. All I need it for is to encapsulate DECnet and then forward it to a peer via my internet connected router. It won't be the highest performance but it will get the Area up, I can then change it at a later date if required. BTW, my Cisco 1800 does not support DECnet or GRE so this is not an option. Does anyone have any peering info or the config used either on a Cisco or DECbrouter. Thanks, Mark

11 years, 11 months

1
0
0 0

Config Details Required

by b4＠gewt.net

On Sun, 8 Sep 2013, Tim Sneddon wrote: No, that's the one. The DECbrouter, running IOS 10.3 or higher supports GRE/IP, which provides a tunnel across an IP network. The current HECnet Cisco mesh consists of a Cisco 1800, DECbrouter 90T2, Cisco 2611, Cisco 7206 and other Cisco gear. 3745 and 7204STD on my end. Regards, Tim. -- Cory Smelosky http://gewt.net Personal stuff http://gimme-sympathy.org Projects

11 years, 11 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

HECnet