On 2012-11-04 19:42, Cory Smelosky wrote:
On 3 Nov 2012, at 20:50, Jordi Guillaumes i Pons <jg at jordi.guillaumes.name> wrote:
El 04/11/2012, a les 0:01, Cory Smelosky <b4 at gewt.net> va escriure:
That is for M+... I think he is asking for M (no plus)
Oops, I actually meant M+. I started with that exact baseline image and I had no idea it already had DECnet on it.
But I WAS trying to setup non-plus RSX-11M earlier, so I may go back to trying that as well.
With RSX11M you will have lots of fun fiddling with the partitions :). RSX11M+ is way too easy ;)
(Just kidding)
Jordi Guillaumes i Pons
jg at jordi.guillaumes.name
HECnet: BITXOV::JGUILLAUMES
Now, back to RSTS/E discussion.
So I thought i'd try out Ersatz-11 instead of simh. I've gotten RSTS/E + DECnet installed alright, and it attaches to the interface fine and it seems to work better. But every time I try to SET HOST I get some variation of:
Event type 5.15, Receive failed
Occurred 22-Oct-25 13:36:28.1 on node 33.306 (GEWT1)
Line UNA-0
Failure reason =Unrecognized frame destination
Ethernet header = AA0004003285 3C075443A176 0800
and
Event type 0.0, Event records lost
Occurred 22-Oct-25 13:39:13.0 on node 33.306 (GEWT1)
Any ideas?
Looks like you have a remote node that has not set the MAC address correctly.
AA-00-04-00-32-85 corresponds to 33.306. And that is the destination of the ethernet packet that you received. So far, so good. However, the source address in those packets are 3C-07-54-43-A1-76, which is not a DECnet address. So check the "other" machine that you are trying to talk to.
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
On 3 Nov 2012, at 20:50, Jordi Guillaumes i Pons <jg at jordi.guillaumes.name> wrote:
El 04/11/2012, a les 0:01, Cory Smelosky <b4 at gewt.net> va escriure:
That is for M+... I think he is asking for M (no plus)
Oops, I actually meant M+. I started with that exact baseline image and I had no idea it already had DECnet on it.
But I WAS trying to setup non-plus RSX-11M earlier, so I may go back to trying that as well.
With RSX11M you will have lots of fun fiddling with the partitions :). RSX11M+ is way too easy ;)
(Just kidding)
Jordi Guillaumes i Pons
jg at jordi.guillaumes.name
HECnet: BITXOV::JGUILLAUMES
Now, back to RSTS/E discussion.
So I thought i'd try out Ersatz-11 instead of simh. I've gotten RSTS/E + DECnet installed alright, and it attaches to the interface fine and it seems to work better. But every time I try to SET HOST I get some variation of:
Event type 5.15, Receive failed
Occurred 22-Oct-25 13:36:28.1 on node 33.306 (GEWT1)
Line UNA-0
Failure reason =Unrecognized frame destination
Ethernet header = AA0004003285 3C075443A176 0800
and
Event type 0.0, Event records lost
Occurred 22-Oct-25 13:39:13.0 on node 33.306 (GEWT1)
Any ideas?
El 04/11/2012, a les 0:01, Cory Smelosky <b4 at gewt.net> va escriure:
That is for M+... I think he is asking for M (no plus)
Oops, I actually meant M+. I started with that exact baseline image and I had no idea it already had DECnet on it.
But I WAS trying to setup non-plus RSX-11M earlier, so I may go back to trying that as well.
With RSX11M you will have lots of fun fiddling with the partitions :). RSX11M+ is way too easy ;)
(Just kidding)
Jordi Guillaumes i Pons
jg at jordi.guillaumes.name
HECnet: BITXOV::JGUILLAUMES
On Nov 3, 2012, at 8:06 PM, Cory Smelosky <b4 at gewt.net> wrote:
On Nov 3, 2012, at 7:01 PM, Cory Smelosky <b4 at gewt.net> wrote:
On Nov 3, 2012, at 6:55 PM, Jordi Guillaumes i Pons <jg at jordi.guillaumes.name> wrote:
El 03/11/2012, a les 23:45, Oleg Safiullin <form at pdp-11.org.ru> va escriure:
Ah okay, I understand now. Do you happen to have a DECnet installation tape for RSX-11 though? The ones I found on the trailing-edge ftp site are corrupted.
rsx_dists/rsx11mpbl87.dsk.bz2 image contains working endnode DECnet kit.
That is for M+... I think he is asking for M (no plus)
Oops, I actually meant M+. I started with that exact baseline image and I had no idea it already had DECnet on it.
Well, I finished but!
Event type 5.13, Initialization failure
Occurred 3-OCT-12 20:04:43 on node 33.301 (MANDY)
Line UNA-0
I did NETGEN, I configured the mac address in simh correctly. How would I go about figuring out what exactly the problem is?
Nevermind. Problem was with simh version 3.8-1. Moving it to a git revision that doesn't have the rq bugs solved the problem.
But I WAS trying to setup non-plus RSX-11M earlier, so I may go back to trying that as well.
Jordi Guillaumes i Pons
jg at jordi.guillaumes.name
HECnet: BITXOV::JGUILLAUMES
On Nov 3, 2012, at 7:01 PM, Cory Smelosky <b4 at gewt.net> wrote:
On Nov 3, 2012, at 6:55 PM, Jordi Guillaumes i Pons <jg at jordi.guillaumes.name> wrote:
El 03/11/2012, a les 23:45, Oleg Safiullin <form at pdp-11.org.ru> va escriure:
Ah okay, I understand now. Do you happen to have a DECnet installation tape for RSX-11 though? The ones I found on the trailing-edge ftp site are corrupted.
rsx_dists/rsx11mpbl87.dsk.bz2 image contains working endnode DECnet kit.
That is for M+... I think he is asking for M (no plus)
Oops, I actually meant M+. I started with that exact baseline image and I had no idea it already had DECnet on it.
Well, I finished but!
Event type 5.13, Initialization failure
Occurred 3-OCT-12 20:04:43 on node 33.301 (MANDY)
Line UNA-0
I did NETGEN, I configured the mac address in simh correctly. How would I go about figuring out what exactly the problem is?
But I WAS trying to setup non-plus RSX-11M earlier, so I may go back to trying that as well.
Jordi Guillaumes i Pons
jg at jordi.guillaumes.name
HECnet: BITXOV::JGUILLAUMES
On Nov 3, 2012, at 6:55 PM, Jordi Guillaumes i Pons <jg at jordi.guillaumes.name> wrote:
El 03/11/2012, a les 23:45, Oleg Safiullin <form at pdp-11.org.ru> va escriure:
Ah okay, I understand now. Do you happen to have a DECnet installation tape for RSX-11 though? The ones I found on the trailing-edge ftp site are corrupted.
rsx_dists/rsx11mpbl87.dsk.bz2 image contains working endnode DECnet kit.
That is for M+... I think he is asking for M (no plus)
Oops, I actually meant M+. I started with that exact baseline image and I had no idea it already had DECnet on it.
But I WAS trying to setup non-plus RSX-11M earlier, so I may go back to trying that as well.
Jordi Guillaumes i Pons
jg at jordi.guillaumes.name
HECnet: BITXOV::JGUILLAUMES
Jordi Guillaumes i Pons wrote:
El 03/11/2012, a les 23:45, Oleg Safiullin <form at pdp-11.org.ru> va escriure:
Ah okay, I understand now. Do you happen to have a DECnet installation tape for RSX-11 though? The ones I found on the trailing-edge ftp site are corrupted.
rsx_dists/rsx11mpbl87.dsk.bz2 image contains working endnode DECnet kit.
That is for M+... I think he is asking for M (no plus)
DECnet 11M V4.2 is here:
http://bitsavers.trailing-edge.com/bits/DEC/pdp11/magtapes/rsx11m/
El 03/11/2012, a les 23:45, Oleg Safiullin <form at pdp-11.org.ru> va escriure:
Ah okay, I understand now. Do you happen to have a DECnet installation tape for RSX-11 though? The ones I found on the trailing-edge ftp site are corrupted.
rsx_dists/rsx11mpbl87.dsk.bz2 image contains working endnode DECnet kit.
That is for M+... I think he is asking for M (no plus)
Jordi Guillaumes i Pons
jg at jordi.guillaumes.name
HECnet: BITXOV::JGUILLAUMES
> Ah okay, I understand now. Do you happen to have a DECnet installation tape for RSX-11 though? The ones I found on the trailing-edge ftp site are corrupted.
rsx_dists/rsx11mpbl87.dsk.bz2 image contains working endnode DECnet kit.
On Nov 3, 2012, at 6:35 PM, Oleg Safiullin <form at pdp-11.org.ru> wrote:
I'll test from RSX once I get DECnet installed on it how would I use image you provided?
My RSX/VF image is not for use in RSX.
It can be used to create real tape for RSTS using RSX-11M-PLUS VCP utility.
To connect to RSTS from RSX you need RRS utility.
In M+ V4.6 you can build it using [200,200]UNSGEN.CMD after installing DECnet:
--
SET /NONAMED
CHD DU:[200,200]
@UNSGEN
;
; =====================================================================
; UNSGEN - Unsupported Utility Generation
; Started at 05:34:23 on 04-NOV-12
; =====================================================================
* 01.00 Do you want to see the UNSGEN notes [D=N]? [Y/N]:
* 02.00 Target system device [dduu, D=SY:] [S]:
* 03.00 Listing/Map device [dduu, D=SY:] [S]: NL:
* 04.00 UIC Group Code for UNSGEN output [O R:1-377 D:5]:
* 05.00 Target operating system [S]: MPL
* 06.00 Should tasks link to the Supervisor Mode FCS library [D=N]? [Y/N]: Y
* 07.00 Do you want the RVT utility [D=N]? [Y/N]:
* 08.00 Do you want the RRS utility [D=N]? [Y/N]:
;
; RRS provides RSX to RSTS terminal communications. It provides
; functions that are similair to those of RMT. RMT communicates between
; RSX systems, RRS communicates between a RSX system and a RSTS system.
; Note that RRS requires the full duplex terminal driver.
;
* 08.00 Do you want the RRS utility [D=N]? [Y/N]:
Ah okay, I understand now. Do you happen to have a DECnet installation tape for RSX-11 though? The ones I found on the trailing-edge ftp site are corrupted.
