Greetings HECnetters...
This is just a quick post to determine if my email addy is now properly
registered to allow me to post to the list. I hope this doesn't create
a huge barrage of OT replies. ;)
--
VAXman- A Bored Certified VMS Kernel Mode Hacker VAXman(at)TMESIS(dot)ORG
Well I speak to machines with the voice of humanity.
Mark, the DECtec list proves, I feel, that HECnet members are interested in DEC hardware and software. And these interests are even broader than what DEC manufactured.
So various topics get into the mix.
The same seems to happen to comp.os.vms where comp.sys.dec kind of posts appear if only because the latter newsgroup is less active and mostly because you know the real experts read cov too. The same applies here. If I'd have a particular RT11 or RSX11M+ question then I"d drop it here ...
Hans
-----Original Message-----
From: Mark Benson <md.benson at gmail.com>
Sender: owner-hecnet at Update.UU.SE
Date: Tue, 18 Dec 2012 07:34:19
To: <hecnet at Update.UU.SE>
Reply-To: hecnet at Update.UU.SE
Subject: Re: [HECnet] digest mode
On 18 Dec 2012, at 00:22, Johnny Billquist wrote:
Ouch, Peter. Sorry that I'm contributing to the spam. I do agree that the flurry of mails these last two days have exceeded anything I would normally expect, and it is getting a little much off-topic.
Let's see if it calms down some, or else I'll put on my hat and ask for some of it to move elsewhere.
The mailing list *is* intended for HECnet specific things, and of course there pops up tangental questions, but Hercules and other things are a little too far out, if you ask me.
I have already tried to promote an alternative forum for the more wide ranging topics by starting the DECtec mailing list which is a wider overarching enthusiast list for DEC/Compaq/HP users. In spite of many people from this list also being also subscribed to DECtec it doesn't seem to have worked all that well. The list is mostly silent.
The whole idea was prompted by a past period when the list got jammed with non-on-topic posts, a lot of which were interesting and valuable, but didn't concern HECnet.
--
Mark Benson
http://DECtec.info
Twitter: @DECtecInfo
HECnet: STAR69::MARK
Online Resource & Mailing List for DEC Enthusiasts.
On 18 Dec 2012, at 00:22, Johnny Billquist wrote:
Ouch, Peter. Sorry that I'm contributing to the spam. I do agree that the flurry of mails these last two days have exceeded anything I would normally expect, and it is getting a little much off-topic.
Let's see if it calms down some, or else I'll put on my hat and ask for some of it to move elsewhere.
The mailing list *is* intended for HECnet specific things, and of course there pops up tangental questions, but Hercules and other things are a little too far out, if you ask me.
I have already tried to promote an alternative forum for the more wide ranging topics by starting the DECtec mailing list which is a wider overarching enthusiast list for DEC/Compaq/HP users. In spite of many people from this list also being also subscribed to DECtec it doesn't seem to have worked all that well. The list is mostly silent.
The whole idea was prompted by a past period when the list got jammed with non-on-topic posts, a lot of which were interesting and valuable, but didn't concern HECnet.
--
Mark Benson
http://DECtec.info
Twitter: @DECtecInfo
HECnet: STAR69::MARK
Online Resource & Mailing List for DEC Enthusiasts.
From: "Boyanich, Alastair" <Alastair.Boyanich at au.fujitsu.com>
(Still searching
for the central project group ..
Wouldn't www.2bsd.com be the focal point? Seems like it used to be...
John Wilson
D Bit
Hi Johnny, Clem and $others
Interesting thanks.
Johnny:
When you submitted the patches, where they they go to? (Still searching
for the central project group ..or was that Keith?)
Also, with the whole RetroBSD crowd, that's giving it quite a new lease
of life.
Al.
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE]
On Behalf Of Johnny Billquist
Sent: Tuesday, 18 December 2012 11:19 AM
To: hecnet at Update.UU.SE
Cc: Clem Cole; Boyanich, Alastair
Subject: Re: [HECnet] 2.11BSD
On 2012-12-18 00:31, Clem Cole wrote:
actually 2.10/11 was a distant relation to 4.1/4.2 when Keith
started. but his
group had an 11/34 if IIRC and he wanted some the tools from the vax
that had
blown out the instruction limit
of the address space
Well, compared to FreeBSD/NetBSD/OpenBSD, 4.1/4.2 are also the distant
country cousins. The fact that 2BSD kept being supported long after
even
BSD4.4 was dead only makes it slightly more funny, if more
anachronistic.
2.11BSD is close to dead now, though. I sent out a bunch of
patches/fixes about half a year ago, but it was quite a long time
before
the previous patch set to that went out.
But we're at patch #448 or something like that, to 2.11BSD. A lot of
4.3
functionality was eventually backported to 2.11.
Johnny
Clem
On Dec 17, 2012, at 6:01 PM, Johnny Billquist <bqt at softjar.se>
wrote:
On 2012-12-17 23:50, Boyanich, Alastair wrote:
Hi all,
Can someone straighten me out on a few things.
1) Other than the tuhs/pups guys that seem to have archives of
2.11BSD,
is there a central place that manages source / build / patch trees
?
I've seen the "RetroBSD" guys running this on MIPS PIC32 stuff,
but I
suspect from my readings thus far they don't much care about the
11
tree.
Eh. The obvious canonical source would be sms. Steve M. Schultz,
who is
the official maintainer. I don't remember where he keeps stuff, but
that
should be easy to locate.
Nobody cares about 2BSD except for the PDP-11 people, since 2BSD by
now
are rather distant in relation to all the "modern" BSD.
2) Was 2.11BSD ever ported to other platforms? Given the age/era,
I'm
curious about 8088/8086/NECv20/80286 given the banked memory
models
used
and looking at the 8088/8086 XENIX disassembly.
Nope. That would not have been 2BSD then. And since the PDP-11
don't
even have banked memory, it would probably cause some headaches to
port
2BSD to something like 80286 or other similar machines.
To make it clear - the PDP-11 have a very normal MMU with pages.
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
Ouch, Peter. Sorry that I'm contributing to the spam. I do agree that the flurry of mails these last two days have exceeded anything I would normally expect, and it is getting a little much off-topic.
Let's see if it calms down some, or else I'll put on my hat and ask for some of it to move elsewhere.
The mailing list *is* intended for HECnet specific things, and of course there pops up tangental questions, but Hercules and other things are a little too far out, if you ask me.
Johnny
On 2012-12-18 00:58, Peter Coghlan wrote:
And it's far easier to implement digest than get users to behave.
If there is a problem with the way people are behaving, I think it is
better
to try to encourage and reward better behaviour than to try to accomodate
it.
Sorry, that should be read "get users to change behaviour." I don't want
to restrict what anyone wants to talk about, personally.
Sorry - I misunderstood.
Sorry again, I don't feel you're trying to oppress anyone. And I
appreciate kicking the tires before buying the car. In my particular case
- and I can accept it graciously if I'm the only one - I would be very
happy if the HECnet list were available in digest form. I just don't see
that impinging on any other forms. If Mailman is adopted, it's already
part of the picture.
It looks like there are others that want digests and that digests are on
the way anyway.
I think that there are other issues with the list, unrelated to digests.
I was under the mistaken impression that others were trying to diplomatically
raise these issues and offer suggestions at possible solutions. It appears
that I was quite wrong there and I have now run out of diplomacy myself.
I wonder would it be possible to make available a mailing list where only
issues closely related to HECnet are discussed and where a policy of "no point
in making one post when ten will do" does not prevail?
I don't really have any use for a mailing list that has so far today produced
100+ messages on topics as diverse as 2.11BSD and GAWK on IA64 plus lots of
administrative stuff and containing buried within a few little gems of
importance to HECnet members, whether it has digests or not.
Regards,
Peter Coghlan.
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
On 2012-12-18 00:31, Clem Cole wrote:
actually 2.10/11 was a distant relation to 4.1/4.2 when Keith started. but his group had an 11/34 if IIRC and he wanted some the tools from the vax that had blown out the instruction limit
of the address space
Well, compared to FreeBSD/NetBSD/OpenBSD, 4.1/4.2 are also the distant country cousins. The fact that 2BSD kept being supported long after even BSD4.4 was dead only makes it slightly more funny, if more anachronistic.
2.11BSD is close to dead now, though. I sent out a bunch of patches/fixes about half a year ago, but it was quite a long time before the previous patch set to that went out.
But we're at patch #448 or something like that, to 2.11BSD. A lot of 4.3 functionality was eventually backported to 2.11.
Johnny
Clem
On Dec 17, 2012, at 6:01 PM, Johnny Billquist <bqt at softjar.se> wrote:
On 2012-12-17 23:50, Boyanich, Alastair wrote:
Hi all,
Can someone straighten me out on a few things.
1) Other than the tuhs/pups guys that seem to have archives of 2.11BSD,
is there a central place that manages source / build / patch trees ?
I've seen the "RetroBSD" guys running this on MIPS PIC32 stuff, but I
suspect from my readings thus far they don't much care about the 11
tree.
Eh. The obvious canonical source would be sms. Steve M. Schultz, who is the official maintainer. I don't remember where he keeps stuff, but that should be easy to locate.
Nobody cares about 2BSD except for the PDP-11 people, since 2BSD by now are rather distant in relation to all the "modern" BSD.
2) Was 2.11BSD ever ported to other platforms? Given the age/era, I'm
curious about 8088/8086/NECv20/80286 given the banked memory models used
and looking at the 8088/8086 XENIX disassembly.
Nope. That would not have been 2BSD then. And since the PDP-11 don't even have banked memory, it would probably cause some headaches to port 2BSD to something like 80286 or other similar machines.
To make it clear - the PDP-11 have a very normal MMU with pages.
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
On 18 Dec 2012, at 01:58, Peter Coghlan <HECNET at beyondthepale.ie> wrote:
GAWK on IA64
Actually I was looking for that to improve the HECNET info web page but I can see how it's a bit off-topic :)
I personally like the atmosphere on this list and ignore any discussions that aren't of interest to me.
Sampsa
And it's far easier to implement digest than get users to behave.
If there is a problem with the way people are behaving, I think it is
better
to try to encourage and reward better behaviour than to try to accomodate
it.
Sorry, that should be read "get users to change behaviour." I don't want
to restrict what anyone wants to talk about, personally.
Sorry - I misunderstood.
Sorry again, I don't feel you're trying to oppress anyone. And I
appreciate kicking the tires before buying the car. In my particular case
- and I can accept it graciously if I'm the only one - I would be very
happy if the HECnet list were available in digest form. I just don't see
that impinging on any other forms. If Mailman is adopted, it's already
part of the picture.
It looks like there are others that want digests and that digests are on
the way anyway.
I think that there are other issues with the list, unrelated to digests.
I was under the mistaken impression that others were trying to diplomatically
raise these issues and offer suggestions at possible solutions. It appears
that I was quite wrong there and I have now run out of diplomacy myself.
I wonder would it be possible to make available a mailing list where only
issues closely related to HECnet are discussed and where a policy of "no point
in making one post when ten will do" does not prevail?
I don't really have any use for a mailing list that has so far today produced
100+ messages on topics as diverse as 2.11BSD and GAWK on IA64 plus lots of
administrative stuff and containing buried within a few little gems of
importance to HECnet members, whether it has digests or not.
Regards,
Peter Coghlan.
actually 2.10/11 was a distant relation to 4.1/4.2 when Keith started. but his group had an 11/34 if IIRC and he wanted some the tools from the vax that had blown out the instruction limit
of the address space
Clem
On Dec 17, 2012, at 6:01 PM, Johnny Billquist <bqt at softjar.se> wrote:
On 2012-12-17 23:50, Boyanich, Alastair wrote:
Hi all,
Can someone straighten me out on a few things.
1) Other than the tuhs/pups guys that seem to have archives of 2.11BSD,
is there a central place that manages source / build / patch trees ?
I've seen the "RetroBSD" guys running this on MIPS PIC32 stuff, but I
suspect from my readings thus far they don't much care about the 11
tree.
Eh. The obvious canonical source would be sms. Steve M. Schultz, who is the official maintainer. I don't remember where he keeps stuff, but that should be easy to locate.
Nobody cares about 2BSD except for the PDP-11 people, since 2BSD by now are rather distant in relation to all the "modern" BSD.
2) Was 2.11BSD ever ported to other platforms? Given the age/era, I'm
curious about 8088/8086/NECv20/80286 given the banked memory models used
and looking at the 8088/8086 XENIX disassembly.
Nope. That would not have been 2BSD then. And since the PDP-11 don't even have banked memory, it would probably cause some headaches to port 2BSD to something like 80286 or other similar machines.
To make it clear - the PDP-11 have a very normal MMU with pages.
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
