On 12/23/2012 05:44 PM, Steve Davidson wrote:
While the 4.7 system is good, personally, I would go with a version 5
system. V5.5 or V5.5-4 would be my choice. It has so many more
capabilities and toys/tools!
But oohhhhh soooo painfully slow compared to v4.7. You wouldn't
believe the complaints I endured from my users on Monday after spending
all weekend doing an upgrade to 5.0. They loved me before that!
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
While the 4.7 system is good, personally, I would go with a version 5
system. V5.5 or V5.5-4 would be my choice. It has so many more
capabilities and toys/tools!
-Steve
-----Original Message-----
From: owner-hecnet at Update.UU.SE
[mailto:owner-hecnet at Update.UU.SE] On Behalf Of Cory Smelosky
Sent: Sunday, December 23, 2012 17:21
To: hecnet at Update.UU.SE
Subject: [HECnet] Older VAXVMS Install kits?
Hey everyone!
As i'm not getting anywhere with my TOPS-10 endeavours, I
thought i'd try something else: older VAXVMS in SIMH's
VAX-11/780 simulator. ;)
1). What would be the best/most interesting version to try?
2). Where would I get install media for these older versions? ;)
Thanks!
On 23 Dec 2012, at 17:33, Jordi Guillaumes i Pons <jg at jordi.guillaumes.name> wrote:
Al 23/12/12 21:13, En/na Cory Smelosky ha escrit:
Okay, i'm getting linker errors (undefined symbols, et cetera) and it's seeming impossible to generate a TOPS-10 monitor. If anyone wants to help further, let me know.
Did you follow the instructions here?
http://www.asun.net/pdp10/downloads/t10mgen.txt
More-or-less, except I was building for a KL10 instead of a KS10 (KLH10, not SIMH)
I have had no problem doing TOPS-10 MONGENs following that.
http://pastebin.com/LDUWrSEA is what happens
Al 23/12/12 21:13, En/na Cory Smelosky ha escrit:
Okay, i'm getting linker errors (undefined symbols, et cetera) and it's seeming impossible to generate a TOPS-10 monitor. If anyone wants to help further, let me know.
Did you follow the instructions here?
http://www.asun.net/pdp10/downloads/t10mgen.txt
I have had no problem doing TOPS-10 MONGENs following that.
Al 23/12/12 23:21, En/na Cory Smelosky ha escrit:
i'm not getting anywhere with my TOPS-10 endeavours, I thought i'd try something else: older VAXVMS in SIMH's VAX-11/780 simulator.;)
1). What would be the best/most interesting version to try?
2). Where would I get install media for these older versions
You could try to build a VMS 4.7 system. To do that you will have to build a 4.6 and then upgrade it (IIRC 4.6 has also a mandatory update to apply). Previous to do that you will need to make a stand alone backup bootable kit. I made a bootable tape image using a running openVMS 7.3 system so I was able to boot STANDALONE BACKUP in the 780. Alfter that you can restore then 4.6 tape and boot it to install the rest of 4.6 and later upgrade to 4.7.
You will find 4.7 in the 780 simulator boots really fast ;)
The kits and some layered products are available at ftp.trailing-edge.com.
Good luck!
Hey everyone!
As i'm not getting anywhere with my TOPS-10 endeavours, I thought i'd try something else: older VAXVMS in SIMH's VAX-11/780 simulator. ;)
1). What would be the best/most interesting version to try?
2). Where would I get install media for these older versions? ;)
Thanks!
I used modula 2 on a VAX in 1991 and had a line printer listing of all module definitions and implementations for a long time. I would be really interested in this please please!
http://www.wickensonline.co.ukhttp://declegacy.org.ukhttp://retrochallenge.nethttps://twitter.com/#!/%40urbancamo
On 23 Dec 2012, at 16:50, "Bob Armstrong" <bob at jfcl.com> wrote:
Speaking of Modula-2, I have an incomplete Modula-2 for RSX. Anyone else
have the missing bits and pieces?
Don't know what bits you're looking for, but somewhere I have Modula-2 for
VMS. It's all written in Modula-2, of course.
Bob
On 23 Dec 2012, at 16:01, "Rob Jarratt" <robert.jarratt at ntlworld.com> wrote:
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE]
On Behalf Of Cory Smelosky
Sent: 23 December 2012 20:13
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] SIMH PDP-10 + Networking?
On 23 Dec 2012, at 14:59, Cory Smelosky <b4 at gewt.net> wrote:
On 23 Dec 2012, at 14:03, Cory Smelosky <b4 at gewt.net> wrote:
On 23 Dec 2012, at 14:01, sampsa at mac.com wrote:
I don't even know what that means..
Give me a bit. If i've finally figured this out it'll be on HECnet
later today.
I figured it out and got a monitor built. It just doesn't seem to /work.
;)
Okay, i'm getting linker errors (undefined symbols, et cetera) and it's
seeming impossible to generate a TOPS-10 monitor. If anyone wants to help
further, let me know.
Just had a quick look at the manual you pointed me at. Make sure you are
following the instructions for the KS10 and not the KL10, SIMH emulates the
KS10 only.
Actually, I was building a KL monitor because KLH10 allows me to do DECnet.
Sampsa
On 23 Dec 2012, at 20:58, Cory Smelosky <b4 at gewt.net> wrote:
On 23 Dec 2012, at 13:49, sampsa at mac.com wrote:
I want an account on the TOPS-10 machine if possible :)
I can get you one on mine today if you happen to get me a working
image that allows me to build a monitor without errors. ;)
sampsa
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE]
On Behalf Of Cory Smelosky
Sent: 23 December 2012 20:13
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] SIMH PDP-10 + Networking?
On 23 Dec 2012, at 14:59, Cory Smelosky <b4 at gewt.net> wrote:
On 23 Dec 2012, at 14:03, Cory Smelosky <b4 at gewt.net> wrote:
On 23 Dec 2012, at 14:01, sampsa at mac.com wrote:
I don't even know what that means..
Give me a bit. If i've finally figured this out it'll be on HECnet
later today.
I figured it out and got a monitor built. It just doesn't seem to /work.
;)
Okay, i'm getting linker errors (undefined symbols, et cetera) and it's
seeming impossible to generate a TOPS-10 monitor. If anyone wants to help
further, let me know.
Just had a quick look at the manual you pointed me at. Make sure you are
following the instructions for the KS10 and not the KL10, SIMH emulates the
KS10 only.
Sampsa
On 23 Dec 2012, at 20:58, Cory Smelosky <b4 at gewt.net> wrote:
On 23 Dec 2012, at 13:49, sampsa at mac.com wrote:
I want an account on the TOPS-10 machine if possible :)
I can get you one on mine today if you happen to get me a working
image that allows me to build a monitor without errors. ;)
sampsa
On 23 Dec 2012, at 14:59, Cory Smelosky <b4 at gewt.net> wrote:
On 23 Dec 2012, at 14:03, Cory Smelosky <b4 at gewt.net> wrote:
On 23 Dec 2012, at 14:01, sampsa at mac.com wrote:
I don't even know what that means..
Give me a bit. If i've finally figured this out it'll be on HECnet later today.
I figured it out and got a monitor built. It just doesn't seem to /work. ;)
Okay, i'm getting linker errors (undefined symbols, et cetera) and it's seeming impossible to generate a TOPS-10 monitor. If anyone wants to help further, let me know.
Sampsa
On 23 Dec 2012, at 20:58, Cory Smelosky <b4 at gewt.net> wrote:
On 23 Dec 2012, at 13:49, sampsa at mac.com wrote:
I want an account on the TOPS-10 machine if possible :)
I can get you one on mine today if you happen to get me a working image that allows me to build a monitor without errors. ;)
sampsa
