On 12/26/2012 06:41 AM, sampsa at mac.com wrote:
Accounts given upon request.
Account requested!
Username SAMPSA, set a temporary password of ikprudkr and I'll put a real one in on log on.
You're good to go!
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On 12/26/2012 04:30 AM, Rob Jarratt wrote:
Actually it looks like I would need to implement various other layers before
I could even start on NICE, that might be a bit too much. SNMP might be an
option in that case. I don't know much about the details of SNMP, I can look
it up of course but I guess there would need to be a format for the routing
and end node data, if I can match what CISCO produces then that would make
it easier, anyone have any info on this?
The Cisco SNMP formats are generally pretty good (due to widespread
use) but I've never looked at DECnet-related variables via SNMP. I'll
be hacking on that a bit today in between work and random snowstorm panic.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On 12/25/2012 3:09 PM, sampsa at mac.com wrote:
On 25 Dec 2012, at 22:06, Dave McGuire <mcguire at neurotica.com> wrote:
Further, most VMS clusters are built with machines in the same
datacenter. It's not generally a wide-area thing.
Unless you count those geographically separate clusters with FDDI links :)
Mmmm, FDDI.
Come to think of it, I have like 3 of those cards and even some cables in London.
I've got two FDDI cards one for each 4000/500. Really need to get those things up and running.
Of course FDDI is faster than QBus, but that's another story. :)
-brian
On 26 Dec 2012, at 10:29, "Steve Davidson" <jeep at scshome.net> wrote:
-----Original Message-----
From: owner-hecnet at Update.UU.SE
[mailto:owner-hecnet at Update.UU.SE] On Behalf Of Cory Smelosky
Sent: Sunday, December 23, 2012 18:04
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] Older VAXVMS Install kits?
On 23 Dec 2012, at 17:59, Dave McGuire <mcguire at neurotica.com> wrote:
On 12/23/2012 05:56 PM, Cory Smelosky wrote:
As i'm not getting anywhere with my TOPS-10 endeavours,
I thought
i'd try something else: older VAXVMS in SIMH's VAX-11/780
simulator. ;)
1). What would be the best/most interesting version to try? 2).
Where would I get install media for these older versions? ;)
I have a bunch of older VMS distributions. I don't know
if they're
available anywhere else or not; I would assume so but am
not sure.
At least several 3.x and 4.x distributions, going back to
3.0. Let
me know if they're wanted and I can put them up somewhere.
Please upload them, I am quite interested in older VMS.
I don't want to squirt them around publicly. Do you have
a place on
HECnet that I can copy them to?
Unfortunately, my link is currently down (Steve's been busy
and we've been unable to quite get MWATCH working for me), so
we'll need to use some other method. Can you dump them on a
system here via scp? I have a pentium II I can give easy
access to for that.
I will try to deal with that today. So far this morning I have been
reworking NETUPDATE because of the large number of node additions and
changes. I found a bug when running it on GORVAX::. Seems that Sampsa
never changed the SCSSYSTEMID when he changed areas... I'll leave that
as an exercise for Sampsa.
I found an alternative way to get connected: use the VPN I had to establish a link to a system with a static IP. ;)
Sampsa, Tag - you're it! :-)
The new version of NETUPDATE is much faster and deals with cluster
environments. Current versions should pick up the new version
automatically.
-Steve
I'd say 4.7 for speed and period-correctness, 5.5 for
feature fulness.
Maybe i'll go with both!
Do it!
I will!
The last release of VMS to run on an 11/780 was, I believe, v6.2.
I have a copy of 6.2 in some file format nothing knows.
VMS doesn't even seem to.
Send me a copy and I'll see if I can figure it out.
I found it here:
http://wdl1.winworldpc.com/Abandonware%20Operating%20Systems/M
isc/OpenVMS%206.2%20%5bVAX%5d.7z ( I hope you can handle 7-zip. > It's
probably really VMS backup format and I was using it wrong. ;) )
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
--
Cory Smelosky
http://gewt.net/ Personal stuff!
http://gimme-sympathy.org/ My permanently-a-work-in-progress pet project.
-----Original Message-----
From: owner-hecnet at Update.UU.SE
[mailto:owner-hecnet at Update.UU.SE] On Behalf Of Cory Smelosky
Sent: Sunday, December 23, 2012 18:04
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] Older VAXVMS Install kits?
On 23 Dec 2012, at 17:59, Dave McGuire <mcguire at neurotica.com> wrote:
On 12/23/2012 05:56 PM, Cory Smelosky wrote:
As i'm not getting anywhere with my TOPS-10 endeavours,
I thought
i'd try something else: older VAXVMS in SIMH's VAX-11/780
simulator. ;)
1). What would be the best/most interesting version to try? 2).
Where would I get install media for these older versions? ;)
I have a bunch of older VMS distributions. I don't know
if they're
available anywhere else or not; I would assume so but am
not sure.
At least several 3.x and 4.x distributions, going back to
3.0. Let
me know if they're wanted and I can put them up somewhere.
Please upload them, I am quite interested in older VMS.
I don't want to squirt them around publicly. Do you have
a place on
HECnet that I can copy them to?
Unfortunately, my link is currently down (Steve's been busy
and we've been unable to quite get MWATCH working for me), so
we'll need to use some other method. Can you dump them on a
system here via scp? I have a pentium II I can give easy
access to for that.
I will try to deal with that today. So far this morning I have been
reworking NETUPDATE because of the large number of node additions and
changes. I found a bug when running it on GORVAX::. Seems that Sampsa
never changed the SCSSYSTEMID when he changed areas... I'll leave that
as an exercise for Sampsa.
Sampsa, Tag - you're it! :-)
The new version of NETUPDATE is much faster and deals with cluster
environments. Current versions should pick up the new version
automatically.
-Steve
I'd say 4.7 for speed and period-correctness, 5.5 for
feature fulness.
Maybe i'll go with both!
Do it!
I will!
The last release of VMS to run on an 11/780 was, I believe, v6.2.
I have a copy of 6.2 in some file format nothing knows.
VMS doesn't even seem to.
Send me a copy and I'll see if I can figure it out.
I found it here:
http://wdl1.winworldpc.com/Abandonware%20Operating%20Systems/M
isc/OpenVMS%206.2%20%5bVAX%5d.7z ( I hope you can handle 7-zip. > It's
probably really VMS backup format and I was using it wrong. ;) )
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On 26 Dec 2012, at 10:25, "Steve Davidson" <jeep at scshome.net> wrote:
-----Original Message-----
From: owner-hecnet at Update.UU.SE
[mailto:owner-hecnet at Update.UU.SE] On Behalf Of Cory Smelosky
Sent: Sunday, December 23, 2012 21:45
To: Johnny Billquist
Cc: hecnet at Update.UU.SE
Subject: Re: [HECnet] Older VAXVMS Install kits?
On 23 Dec 2012, at 21:42, Johnny Billquist <bqt at softjar.se> wrote:
On 2012-12-24 03:37, Cory Smelosky wrote:
On 23 Dec 2012, at 21:33, "Steve Davidson"
<jeep at scshome.net> wrote:
-----Original Message-----
From: owner-hecnet at Update.UU.SE
[mailto:owner-hecnet at Update.UU.SE] On Behalf Of Cory Smelosky
Sent: Sunday, December 23, 2012 21:25
To: hecnet at Update.UU.SE
Cc: Brian Schenkenberger, VAXman-
Subject: Re: [HECnet] Older VAXVMS Install kits?
On 23 Dec 2012, at 21:23, Johnny Billquist
<bqt at softjar.se> wrote:
On 2012-12-24 03:05, Brian Schenkenberger, VAXman- wrote:
Cory Smelosky <b4 at gewt.net> writes:
I might have the wrong tape.
Is there some specific reason for V4.6?
Get a news VMS version -- I can make V6.something or
V7.something
available for you -- and then, restore the .B save set to
your boot
device. Then, you boot from the system disk to continue
the install.
Back then, VMS was dis- tributed on tape. I've no
idea how you
access that from SimH. During the boot, VMS will prompt
you to enter
where the distribution media is mounted and then, it will
just do the
rest -- just answer to the questions as they arise.
If I can find the time, I'll get to my storage unit and
pull the V4
(orange
wall) tomes with the installation notes for 11/780
just in case.
As I remember the procedure, it's kindof tricky to see how
you'd do it in simh.
On a real 11/780, you'd boot the standalone backup first.
Not sure, but I think that would have been a bunch of
RX01 floppies.
One the standalone backup is running, you can restore the
distribution tape .B saveset to the destination disk, and after
that, things starts getting easier.
However, as simh don't have the FE, nor RX01, how do you
get the standalone backup running?
I wonder if you could use the standalone backup from a
newer VMS to install a really old version. Recent CD
distributions
boot the standalone backup, and I suspect you would able to boot
simh into that.
I'm booting VMS 7.3 and running backup from there to image it to
another disk. Does it NEED to be standalone backup?
Not sure what Cory's real problem is though, as he claims
he now restores the .B saveset and still don't get a bootable
system. Did the backup restore the saveset without complaints?
What is the name of the saveset you are restoring, Cory?
Have you atleast read through the installation manual for a
recent VMS? I think the basic procedure is unchanged.
It copies the backup set without issue. Am I perhaps
attaching it
to the wrong tape device? (tq)
Johnny
It can be standalone or not. Try:
$backup/image/verify <version-saveset>.b/save <device>:
THAT worked.
What line did you use before? And why didn't you read the manuals?
backup vms052.b/save_set dual: As per the VMS 5.0
documentation, with 50 changed to 52.
However, doing backup/image/verify vms052.b/save dua1: worked.
Quick Note:
You have to use the "/image" qualifier. Saveset "B" is a disk image!
"/verify" is for piece of mind
Thanks, others said that awhile ago too, and my email client decided to send old messages again
And the set that 4.6 needed was REQUIRED., not a .B
-Steve
I will go back to trying VMS 4.6 in a bit.
Anyway. Good that you got somewhere.
Johnny
--
Cory Smelosky
http://gewt.net/ Personal stuff!
http://gimme-sympathy.org/ My permanently-a-work-in-progress pet project.
-----Original Message-----
From: owner-hecnet at Update.UU.SE
[mailto:owner-hecnet at Update.UU.SE] On Behalf Of Cory Smelosky
Sent: Sunday, December 23, 2012 21:45
To: Johnny Billquist
Cc: hecnet at Update.UU.SE
Subject: Re: [HECnet] Older VAXVMS Install kits?
On 23 Dec 2012, at 21:42, Johnny Billquist <bqt at softjar.se> wrote:
On 2012-12-24 03:37, Cory Smelosky wrote:
On 23 Dec 2012, at 21:33, "Steve Davidson"
<jeep at scshome.net> wrote:
-----Original Message-----
From: owner-hecnet at Update.UU.SE
[mailto:owner-hecnet at Update.UU.SE] On Behalf Of Cory Smelosky
Sent: Sunday, December 23, 2012 21:25
To: hecnet at Update.UU.SE
Cc: Brian Schenkenberger, VAXman-
Subject: Re: [HECnet] Older VAXVMS Install kits?
On 23 Dec 2012, at 21:23, Johnny Billquist
<bqt at softjar.se> wrote:
On 2012-12-24 03:05, Brian Schenkenberger, VAXman- wrote:
Cory Smelosky <b4 at gewt.net> writes:
I might have the wrong tape.
Is there some specific reason for V4.6?
Get a news VMS version -- I can make V6.something or
V7.something
available for you -- and then, restore the .B save set to
your boot
device. Then, you boot from the system disk to continue
the install.
Back then, VMS was dis- tributed on tape. I've no
idea how you
access that from SimH. During the boot, VMS will prompt
you to enter
where the distribution media is mounted and then, it will
just do the
rest -- just answer to the questions as they arise.
If I can find the time, I'll get to my storage unit and
pull the V4
(orange
wall) tomes with the installation notes for 11/780
just in case.
As I remember the procedure, it's kindof tricky to see how
you'd do it in simh.
On a real 11/780, you'd boot the standalone backup first.
Not sure, but I think that would have been a bunch of
RX01 floppies.
One the standalone backup is running, you can restore the
distribution tape .B saveset to the destination disk, and after
that, things starts getting easier.
However, as simh don't have the FE, nor RX01, how do you
get the standalone backup running?
I wonder if you could use the standalone backup from a
newer VMS to install a really old version. Recent CD
distributions
boot the standalone backup, and I suspect you would able to boot
simh into that.
I'm booting VMS 7.3 and running backup from there to image it to
another disk. Does it NEED to be standalone backup?
Not sure what Cory's real problem is though, as he claims
he now restores the .B saveset and still don't get a bootable
system. Did the backup restore the saveset without complaints?
What is the name of the saveset you are restoring, Cory?
Have you atleast read through the installation manual for a
recent VMS? I think the basic procedure is unchanged.
It copies the backup set without issue. Am I perhaps
attaching it
to the wrong tape device? (tq)
Johnny
It can be standalone or not. Try:
$backup/image/verify <version-saveset>.b/save <device>:
THAT worked.
What line did you use before? And why didn't you read the manuals?
backup vms052.b/save_set dual: As per the VMS 5.0
documentation, with 50 changed to 52.
However, doing backup/image/verify vms052.b/save dua1: worked.
Quick Note:
You have to use the "/image" qualifier. Saveset "B" is a disk image!
"/verify" is for piece of mind...
-Steve
I will go back to trying VMS 4.6 in a bit.
Anyway. Good that you got somewhere.
Johnny
On 26 Dec 2012, at 13:24, Jordi Guillaumes i Pons <jg at jordi.guillaumes.name> wrote:
Cm'on guys. Do you want a relatively cheap place, with good night life, (relative) safety and not-so-hardcore as Beirut? Come to Barcelona! ;)
I'd be cool with that, always liked Catalan joints, used to ski every year in Andorra when I lived in Portugal.
Sampsa
On 26 Dec 2012, at 12:49, Brian Hechinger <wonko at 4amlunch.net> wrote:
Just to cover something here, as far as non-bridge link I *will not* do manual stuff. That's just icky.
For the bridge connections I don't see that we have a lot of choice so we'll have to think on that when we get it.
Brian, the manual stuff was a duck tape solution - the once that don't show up send me their router + end node CSVs and update them whenever there's a change.
For the mapping, it makes no difference where they came from and the format is stupidly simple anyway :)
Sampsa
