On 26 December 2012 09:10, Rob Jarratt <robert.jarratt at ntlworld.com> wrote:
> -----Original Message-----
> From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE]
> On Behalf Of Johnny Billquist
> Sent: 26 December 2012 01:24
> To: hecnet at Update.UU.SE
> Cc: sampsa at mac.com
> Subject: Re: [HECnet] HECnet mapping project
>
> On 2012-12-26 02:13, sampsa at mac.com wrote:
> >
> > On 26 Dec 2012, at 03:00, Johnny Billquist <bqt at softjar.se> wrote:
> >
> >>
> >> Yuck. Seriously, if you depend on manual information, it's going to be
> broken sooner or later.
> >>
> >> I'm not at all clear what the problem is, though. I can, from MIM, tell
> which areas are online. And for each area, you can check which nodes are
> online in that area. After that, it just becomes a question of figuring
out how
> the bits are connected.
[...]
>
> You'll have the same problem with Rob's DECnet router... And possibly
other
> equipment, or nodes that don't want to talk NICE.
I have just downloaded the spec and will think about how easy it would be to
add this to the router, not that anyone other than me uses it :-(
Well, I tried pretty hard (with you) to get it working, but it really wasn't happy, was it?
I'm game for some more diagnostics if you fancy?
Stuart
I'm having some problems with the bridge, I seem to see an awful lot of hashes from update, which then borks all my connectivity.
Going to try to go with the MULTINET tunnel to area 19 for now.
Sampsa
---
Sampsa Laine <sampsa at mac.com>
On 29 Dec 2012, at 15:04, Rob Jarratt <robert.jarratt at ntlworld.com> wrote:
Why not, go ahead. I am area 5. My only 24x7 node is VAX780.
Regards
Rob
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE]
On Behalf Of sampsa at mac.com
Sent: 29 December 2012 10:36
To: hecnet at Update.UU.SE
Subject: [HECnet] UPDATE: HECNET.HLP file for VMS systems
If you don't want to send me a HLP file I can now automatically generate
one from your INFO.TXT file.
Let me know if you want your node added to the automatically generated
help file list.
Sampsa
add nikkel (44.21) to the list Sampsa
-----Oorspronkelijk bericht-----
Van: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] Namens
sampsa at mac.com
Verzonden: zaterdag, december 2012 11:36
Aan: hecnet at Update.UU.SE
Onderwerp: [HECnet] UPDATE: HECNET.HLP file for VMS systems
If you don't want to send me a HLP file I can now automatically generate one
from your INFO.TXT file.
Let me know if you want your node added to the automatically generated help
file list.
Sampsa
Why not, go ahead. I am area 5. My only 24x7 node is VAX780.
Regards
Rob
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE]
On Behalf Of sampsa at mac.com
Sent: 29 December 2012 10:36
To: hecnet at Update.UU.SE
Subject: [HECnet] UPDATE: HECNET.HLP file for VMS systems
If you don't want to send me a HLP file I can now automatically generate
one from your INFO.TXT file.
Let me know if you want your node added to the automatically generated
help file list.
Sampsa
You could send me a list of nodes to pull iNFO.TXT off for now :)
Then work on some funkier .HLP files later.
Sampsa
On 29 Dec 2012, at 13:07, hvlems at zonnet.nl wrote:
Aha, I'm awake now...
------Origineel bericht------
Van: sampsa at mac.com
Afzender: owner-hecnet at Update.UU.SE
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: Re: [HECnet] UPDATE: HECNET.HLP file for VMS systems
Verzonden: 29 december 2012 11:51
It was :)
In any case, the INFO.TXT puller is quite clever, it strips out the .BEGIN-HECNET-INFO -
.END-HECNET-INFO bits out, I figured no use for those in a help file :)
Sampsa
On 29 Dec 2012, at 12:46, hvlems at zonnet.nl wrote:
If that was directed at me: honestly no clue yet...
Aha, I'm awake now...
------Origineel bericht------
Van: sampsa at mac.com
Afzender: owner-hecnet at Update.UU.SE
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: Re: [HECnet] UPDATE: HECNET.HLP file for VMS systems
Verzonden: 29 december 2012 11:51
It was :)
In any case, the INFO.TXT puller is quite clever, it strips out the .BEGIN-HECNET-INFO -
.END-HECNET-INFO bits out, I figured no use for those in a help file :)
Sampsa
On 29 Dec 2012, at 12:46, hvlems at zonnet.nl wrote:
If that was directed at me: honestly no clue yet...
It was :)
In any case, the INFO.TXT puller is quite clever, it strips out the .BEGIN-HECNET-INFO -
.END-HECNET-INFO bits out, I figured no use for those in a help file :)
Sampsa
On 29 Dec 2012, at 12:46, hvlems at zonnet.nl wrote:
If that was directed at me: honestly no clue yet...
If that was directed at me: honestly no clue yet...
------Origineel bericht------
Van: sampsa at mac.com
Afzender: owner-hecnet at Update.UU.SE
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: Re: [HECnet] UPDATE: HECNET.HLP file for VMS systems
Verzonden: 29 december 2012 11:43
OK, actual HLP files or updated INFO.TXTs?
sampsa
On 29 Dec 2012, at 12:36, sampsa at mac.com wrote:
If you don't want to send me a HLP file I can now automatically generate one from your INFO.TXT file.
Let me know if you want your node added to the automatically generated help file list.
Sampsa
OK, actual HLP files or updated INFO.TXTs?
sampsa
On 29 Dec 2012, at 12:36, sampsa at mac.com wrote:
If you don't want to send me a HLP file I can now automatically generate one from your INFO.TXT file.
Let me know if you want your node added to the automatically generated help file list.
Sampsa
Sampsa, it is weekend so I have now time to play too :)
Let me start a few systems (real iron) first!
Hans
------Origineel bericht------
Van: sampsa at mac.com
Afzender: owner-hecnet at Update.UU.SE
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: [HECnet] UPDATE: HECNET.HLP file for VMS systems
Verzonden: 29 december 2012 11:36
If you don't want to send me a HLP file I can now automatically generate one from your INFO.TXT file.
Let me know if you want your node added to the automatically generated help file list.
Sampsa
