I am back online now. SHOW ADJ NODES won t work yet. You may fail to get a connection for SHOW KNOWN CIRCUITS, that is my next task to fix.
Regards
Rob
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Brian Hechinger Sent: 04 April 2013 01:35 To: hecnet at Update.UU.SE Subject: Re: [HECnet] Who was doing that HECnet mapping work?
That was me. I haven't touched that code in a while but I should go take a look at it again. It used SHOW KNOWN CIRCUITS and SHOW ADJ NODES. Let me know when you're back online and I'll play with that some more. -brian On 4/3/2013 6:55 PM, Rob Jarratt wrote:
A while ago there was discussion of a program or DCL script that was automating the creation of a map of HECnet. It stumbled when it came to my user mode router because it did not implement NICE. Well, I have been doing some work to rectify that. The work is far from complete, but under the right circumstances and with a fair wind you can get A5RTR to tell you the output of SHOW KNOWN CIRCUITS.
Who was doing that work, and which commands needed to be supported for the program/script to work?
Regards
Rob
NB A5RTR is not on HECnet at the moment because I have had a change of IP address and I am waiting for Johnny to tell his bridge to re-read its config.
That was me.
I haven't touched that code in a while but I should go take a look at it again. It used SHOW KNOWN CIRCUITS and SHOW ADJ NODES.
Let me know when you're back online and I'll play with that some more.
-brian
On 4/3/2013 6:55 PM, Rob Jarratt wrote:
A while ago there was discussion of a program or DCL script that was automating the creation of a map of HECnet. It stumbled when it came to my user mode router because it did not implement NICE. Well, I have been doing some work to rectify that. The work is far from complete, but under the right circumstances and with a fair wind you can get A5RTR to tell you the output of SHOW KNOWN CIRCUITS.
Who was doing that work, and which commands needed to be supported for the program/script to work?
Regards
Rob
NB A5RTR is not on HECnet at the moment because I have had a change of IP address and I am waiting for Johnny to tell his bridge to re-read its config.
A while ago there was discussion of a program or DCL script that was automating the creation of a map of HECnet. It stumbled when it came to my user mode router because it did not implement NICE. Well, I have been doing some work to rectify that. The work is far from complete, but under the right circumstances and with a fair wind you can get A5RTR to tell you the output of SHOW KNOWN CIRCUITS.
Who was doing that work, and which commands needed to be supported for the program/script to work?
Regards
Rob
NB A5RTR is not on HECnet at the moment because I have had a change of IP address and I am waiting for Johnny to tell his bridge to re-read its config.
On 03/04/2013 20:26, Sampsa Laine wrote:
Better?
BTW, what's your nick, add me, I'm "djinn" and "macaco".
sampsa <sampsa at mac.com>
mobile +961 788 10537
On 3 Apr 2013, at 22:24, Sampsa Laine <sampsa at mac.com> wrote:
Will do.
sampsa <sampsa at mac.com>
mobile +961 788 10537
On 3 Apr 2013, at 22:14, Mark Wickens <mark at wickensonline.co.uk> wrote:
On 29/03/2013 17:22, Sampsa Laine wrote:
Guys,
Sorry to spam you about this but I've actually got the instant messenger / presence management stuff I wrote to a stable enough level that I'll advertise it here.
You might ask what's the point of HIM if we already have VMS PHONE? Well, with HIM you can see who is logged onto ANY machine at any time on the network, instead of just the directory of a specific host.
More details at: http://rhesus.sampsa.com/him/
OR you can just go to RHESUS::[.MEDIALIB.HIM] and grab the HIM.ZIP file.
sampsa <sampsa at mac.com>
mobile +961 788 10537
Sampsa,
I've registered. I couldn't get the zip file direct from rhesus via decnet - you may want to check your permissions.
Mark
msw
On 29/03/2013 17:22, Sampsa Laine wrote:
Guys,
Sorry to spam you about this but I've actually got the instant messenger / presence management stuff I wrote to a stable enough level that I'll advertise it here.
You might ask what's the point of HIM if we already have VMS PHONE? Well, with HIM you can see who is logged onto ANY machine at any time on the network, instead of just the directory of a specific host.
More details at: http://rhesus.sampsa.com/him/
OR you can just go to RHESUS::[.MEDIALIB.HIM] and grab the HIM.ZIP file.
sampsa <sampsa at mac.com>
mobile +961 788 10537
Sampsa,
I've registered. I couldn't get the zip file direct from rhesus via decnet - you may want to check your permissions.
Mark
Off list...
Yeah, I was getting ready to say something as well... at the very least, your "off topic" comments are generally humorous...
On Sun, Mar 31, 2013 at 5:35 AM, Sampsa Laine <sampsa at mac.com> wrote:
On 31 Mar 2013, at 10:06, Gregg Levine <gregg.drwho8 at gmail.com> wrote:
>
> Hello!
> Well you can stop being distracted. He left. The yetis paid him off,
> and he's now inhaling the contents of the kitchen at the only hotel
> near the train station that Amrtrak is using. And yes in the city with
> the dangerous history in it.
>
>
> -----
> Gregg C Levine gregg.drwho8 at gmail.com
> "This signature fought the Time Wars, time and again."
And they say I keep going off-topic on this list..
sampsa <sampsa at mac.com>
mobile +961 788 10537
On 03/31/2013 07:24 PM, Dave McGuire wrote:
On 03/31/2013 07:22 PM, Cory Smelosky wrote:
It seems like that night was an isolated incident.
Cory says that a lot.. ;)
Multiple incidents can stille be "isolated incidents" if at least a few parameters are different. ;)
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Experiments
On 03/31/2013 07:22 PM, Cory Smelosky wrote:
It seems like that night was an isolated incident.
Cory says that a lot.. ;)
--
Dave McGuire, AK4HZ
New Kensington, PA
On 03/31/2013 07:24 AM, Johnny Billquist wrote:
On 2013-03-31 08:27, Cory Smelosky wrote:
On 30 Mar 2013, at 17:52, "Gregg Levine" <gregg.drwho8 at gmail.com> wrote:
On Sat, Mar 30, 2013 at 5:42 PM, Cory Smelosky <b4 at gewt.net> wrote:
On 30 Mar 2013, at 14:59, "Dave McGuire" <mcguire at neurotica.com> wrote:
On 03/30/2013 02:43 PM, Gregg Levine wrote:
You need a VT55. Good luck finding thermal paper for it though.
;-)
We bought 2 new (old stock) VT55's in the early 80s. They were
kind
of fun for graphs, but not worth what the school paid for them.
I'd love to have one of those. They're all pretty much gone at
this point,
unfortunately. The few that remain aren't able to be pried out
of their
owners' hands. (and I don't blame them one bit!)
Hello!
And here I believed you had rooms of things that you haven't even
gotten around to unpacking yet.
Well, a small number of rooms (this building is basically three
very large,
open floors) but I generally know what I have.
Unlike this house which is vastly smaller and I often forget the odd
things I have. ;)
Of course this does explain why there is a legion of mechanical
contrivances running around welding doors shut after making sure no
one, cats included, happened to be inside them.
The cats are lying around being lazy, as cats are wont to do. They
really
don't care about welded doors.
Food, on the other hand...Fergie (one particularly cute and lazy cat)
looked at my breakfast and said, "Hey, that looks yummy! Put it in
the cat!"
Now i'm going to have annoying pop songs stuck in my head.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
Hello!
That's okay. There's a big green thing outside it humming those
annoying pop songs until one of two things happen. The first one is he
gets paid off by those yetis who're still playing trampoline with your
connections out. Or it rains and he gets washed away.
That would explain why I keep getting distracted!
Guys....
Johnny
To get back on topic, I no longer have issues remaining connected to MIM. It seems like that night was an isolated incident.
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Experiments
On 2013-03-30 02:43, Ian McLaughlin wrote:
Johnny,
Is 1.13 showing the full nodelist again? It seems to be. Did you find a cause for the problem? Is it safe to copy the nodelist?
Interesting, and weird. I thought I had found a fix, which worked on my home system, but when I tried it on MIM, it didn't seem to have any effect. But now it does indeed show all nodes. So yes, for now it is ok.
My fix was changing some memory allocation parameters in DECnet. We'll see if it stays fixed.
Johnny
