HECnet

hecnet@lists.dfupdate.se

7 participants
15595 discussions

DDCMP over asynchronous emulated lines on simh 4.0

by jg＠jordi.guillaumes.name

Hello, I'm trying to set up a circuit using the shinny new point-to-point capabilities of the emulated DZ and VH devices under simh 4.0 beta. I am able to set up the lines and circuits, and I get an adjacency up message... but after some seconds the circuit starts to bounce and it does not work at all... %%%%%%%%%%% OPCOM 1-MAY-2013 18:46:08.07 %%%%%%%%%%% Message from user DECNET on BITXR1 DECnet event 4.10, circuit up

12 years, 10 months

dnetcat and TASK objects

by sampsa＠mac.com

I'm trying to connect to a TASK object on RHESUS using linux-decnet's dnetcat. Anyone know what the syntax for the equivalent to this DCL is: $open/read/write net rhesus::"TASK=HIM" sampsa <sampsa at mac.com> mobile +961 788 10537

12 years, 10 months

Anybody have a copy of MX.ZIP?

by system＠TMESIS.COM

Sampsa Laine <sampsa at mac.com> writes: For some reason it's not on FILESERV any more.. Hunter Goatley's and Matt Madison's (MadGoat) Mail eXchange? This is the last version MadGoat released before Matt took MX down the path to be a commercial product. http://decuslib.com/freeware/freewarev40/mx042/ It was subsequently released from the commercial "clink" and it's now being hosted at Kednos et al under open source license. http://www.kednos.com/kednos/Open_Source/MX -- VAXman- A Bored Certified VMS Kernel Mode Hacker VAXman(at)TMESIS(dot)ORG Well I speak to machines with the voice of humanity.

12 years, 11 months

Weird TCP/IP service problem

by system＠TMESIS.COM

Sampsa Laine <sampsa at mac.com> writes: I've define a service to run a DCL script that runs some python. It works fine when one connection is made, but crashes the system = (literally, it core dumps [or whatever the VMS word is]) on multiple = connections. The _system_ crashed? Have you looked at the system dump? Here's the service definition: TCPIP> show service himsrv/full =20 Service: HIMSRV State: Enabled Port: 11337 Protocol: TCP Address: 0.0.0.0 Inactivity: 5 User_name: HIMSRV Process: HIMSRVD Limit: 1 Active: 0 Peak: 1 =20 File: DKA0:[HIMSRV]HIMSRVTCP.COM Flags: Listen Multi =20 Socket Opts: Rcheck Scheck Receive: 0 Send: 0 =20 Log Opts: None File: not defined =20 Security Reject msg: not defined Accept host: 0.0.0.0 Accept netw: 0.0.0.0 What version of TCP/IP? -- VAXman- A Bored Certified VMS Kernel Mode Hacker VAXman(at)TMESIS(dot)ORG Well I speak to machines with the voice of humanity.

12 years, 11 months

MAIL-11 Protocol specs

by tim＠sneddon.id.au

I definitely remember seeing something, although I don't recall where... However, Phrack Vol. 3 Issue 30 has an article titled "VAX/VMS Fake Mail" which seems to have some details. You can find it at: http://www.phrack.org/issues.html?issue=30&id=7 Regards, Tim. Sampsa Laine <sampsa at mac.com> wrote: Anyone have a copy of these? sampsa <sampsa at mac.com> mobile +961 788 10537

12 years, 11 months

MAIL-11 Protocol specs

by sampsa＠mac.com

Anyone have a copy of these? sampsa <sampsa at mac.com> mobile +961 788 10537

12 years, 11 months

Anybody have a copy of MX.ZIP?

by sampsa＠mac.com

For some reason it's not on FILESERV any more.. sampsa <sampsa at mac.com> mobile +961 788 10537

12 years, 11 months

Weird TCP/IP service problem

by sampsa＠mac.com

I've define a service to run a DCL script that runs some python. It works fine when one connection is made, but crashes the system (literally, it core dumps [or whatever the VMS word is]) on multiple connections. Here's the service definition: TCPIP> show service himsrv/full Service: HIMSRV State: Enabled Port: 11337 Protocol: TCP Address: 0.0.0.0 Inactivity: 5 User_name: HIMSRV Process: HIMSRVD Limit: 1 Active: 0 Peak: 1 File: DKA0:[HIMSRV]HIMSRVTCP.COM Flags: Listen Multi Socket Opts: Rcheck Scheck Receive: 0 Send: 0 Log Opts: None File: not defined Security Reject msg: not defined Accept host: 0.0.0.0 Accept netw: 0.0.0.0 sampsa <sampsa at mac.com> mobile +961 788 10537

12 years, 11 months

Cluster alias

by gregg.drwho8＠gmail.com

On Sat, Apr 27, 2013 at 5:30 PM, Cory Smelosky <b4 at gewt.net> wrote: On Sat, 27 Apr 2013, Sampsa Laine wrote: After a disaster on HILANT, I had to rebuild the cluster. What was the disaster? Anyone got quick howto on defining / enabling a cluster alias? sampsa -- Cory Smelosky http://gewt.net/ Personal stuff http://gimme-sympathy.org Experiments Hello! What was the disaster? I thought you knew, the monsters besieging your location moved back to bombard Sampsa with issues. No seriously, what happened? And was it Dave's fault? ----- Gregg C Levine gregg.drwho8 at gmail.com "This signature fought the Time Wars, time and again."

12 years, 11 months

Cluster alias

by b4＠gewt.net

On Sat, 27 Apr 2013, Sampsa Laine wrote: After a disaster on HILANT, I had to rebuild the cluster. What was the disaster? Anyone got quick howto on defining / enabling a cluster alias? sampsa -- Cory Smelosky http://gewt.net/ Personal stuff http://gimme-sympathy.org Experiments

12 years, 11 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

HECnet