HECnet

hecnet@lists.dfupdate.se

12 participants
15566 discussions

Console terminal switch and/or reverse terminal server suggestion?

by gregg.drwho8＠gmail.com

On Tue, May 14, 2013 at 12:04 PM, Cory Smelosky <b4 at gewt.net> wrote: On Tue, 14 May 2013, Bob Armstrong wrote: Johnny Billquist wrote: But any terminal server can also setup a service. Fred wrote: Created services on the DECServer that allow me to connect to the console of any host from any other host. I didn't think a DECserver could do this (or at least not an old, stupid one like a 100 or 200). You guys are saying it can? I've done it fine on my DECserver 200/MC. She's smarter than you think. ;) I'll go dust off an old DECserver and plug it in, and then I'll give it a try. Bob -- Cory Smelosky http://gewt.net/ Personal stuff http://gimme-sympathy.org Experiments Hello! I'll say. I have a collection of 90L-Pluses here. Getting them to work is an interesting problem. I'm basically trying to find the rack that they use to enable a more normal Ethernet connection to them, but it's slow going. ----- Dave don't do that. Stop staring. **Sounds of explosions are heard as something outside his building explodes covering the windows in green goo.** ----- Gregg C Levine gregg.drwho8 at gmail.com "This signature fought the Time Wars, time and again."

12 years, 2 months

Console terminal switch and/or reverse terminal server suggestion?

by b4＠gewt.net

On Tue, 14 May 2013, Bob Armstrong wrote: Johnny Billquist wrote: But any terminal server can also setup a service. Fred wrote: Created services on the DECServer that allow me to connect to the console of any host from any other host. I didn't think a DECserver could do this (or at least not an old, stupid one like a 100 or 200). You guys are saying it can? I've done it fine on my DECserver 200/MC. She's smarter than you think. ;) I'll go dust off an old DECserver and plug it in, and then I'll give it a try. Bob -- Cory Smelosky http://gewt.net/ Personal stuff http://gimme-sympathy.org Experiments

12 years, 2 months

Console terminal switch and/or reverse terminal server suggestion?

by bob＠jfcl.com

Ian McLaughlin wrote: Not sure what you mean by connect from one port to another? You log in to the terminal server. At this point you can attach to any other port Yep, that's exactly what I mean. It means the real VTxxx console terminal as well as the other PDPs can all be connected to the same server. It also means I don't have to turn on or boot up anything else to get it to work except that terminal server. Thanks, Bob

12 years, 2 months

Console terminal switch and/or reverse terminal server suggestion?

by b4＠gewt.net

On Tue, 14 May 2013, Bob Armstrong wrote: Guys Here s the situation I ve got several PDP11s and a couple of PDP8s and I want them all to be able to share a single console terminal. I could just use an old fashioned RS232 switch box, but I was looking for something better. For one thing, a smart switch that would actually buffer output from the unselected ports would be nice, and it d be nice to be able to change the selected port from the terminal keyboard. What d be idea is something like the multi session support that some of the later VTxxx terminals had, but with multiple physical ports and without any special host software. It d also be nice if I wasn t limited to just one physical console but I could use any terminal anywhere on the network too. I thought about using a DECserver in reverse LAT for this, but AFAIK the only way to connect to a DECserver in reverse is from a real host system, like VMS or RSX. That means my console terminal would have to connect to a VAX, log in, and from there connect out again to the DECserver and the PDP-11 or 8 console port. Kinda complicated and ugly. With reverse LAT enabled, you can connect to the ports from an attached terminal. I currently forget how, but it wasn't very hard. It's how I tested having VMS 1.50 on my VT420. I don t think there s any way to have one terminal server connect directly to another terminal server w/o a host system in between, at least not with LAT. Telnet would be OK, if anybody can recommend a multi-port telnet terminal server that works in reverse. It d be especially cool if it can telnet to itself then I could just connect directly from one port on the server to another. Anyway, I was thinking that I can t be the only collector with a bunch of computers and room for only one console, so I thought I d ask what other people are using. Thanks, Bob -- Cory Smelosky http://gewt.net/ Personal stuff http://gimme-sympathy.org Experiments

12 years, 2 months

Console terminal switch and/or reverse terminal server suggestion?

by bob＠jfcl.com

The DS200 will do it just fine though. ... got a DECserver-200/MC - no problem there. Ummm, does anybody have the load software kit for VMS? I just plugged my DS200/MC in only to discover that I don't have the boot image for it. Thanks, Bob

12 years, 2 months

Reviving the DECnet on TOPS-10 project

by b4＠gewt.net

On Tue, 14 May 2013, Gregg Levine wrote: On Tue, May 14, 2013 at 9:37 AM, G. <gerry77 at mail.com> wrote: On Tue, 14 May 2013 08:00:52 -0000, you wrote: Unfortunately it only /mostly/ works. MARLEY TOPS-10 03:23:12 CTY system 1 Connected to Node MARLEY(0) Line # 632 [Checking terminal type . . . found VT100] ..LOGIN 1,2 ..R OPR [CCPWFD Waiting for file daemon to start] %%TTY STOMPER - Starting And it stalls right there unless I repeatedly hit Ctrl/C... That happened to me more than once with some older pre-built monitors, then went away when I did my own install and build of 7.04, so I do not have a solution, and at the time I hadn't any knowledge about TOPS-10. That does not mean that now I'm very proficient on it, but... Upon further investigation, the problem is with OPR.EXE. It WILL NOT execute on my generated monitor. The one provided with TWONKY works fine though. ... Make sure that ORION and other Galaxy processes are all there and that none of them shows a "^C" or "TO" status (IIRC). Also compare processes between TWONKY and your installation and see if there are any differences. OPR is just a client that talks to a daemon process so maybe it just stalls because the daemon is not working, not responding, or not there. Compare contents of SYS:SYSJOB.INI too. HTH, Hello! We are discussing the concepts of running DECNET via TOPS over the implied serial connectors that are now available? Correct? In this case, i'm using klh10. Once this is ironed out I will likely take a crack at it on SIMH's KS10 emulation. The big problem is the circumstances behind it. You'd need to rebuild your entire monitor to support it, I believe. --- These problems are also Dave's fault as supplied by four dozen Yetis, and an equal amount of Cybernen. And not your fault completely Cory, outside of tempting the deities of the ceiling. (Now if that implied science fiction reference misses you please ask off list.) ----- Gregg C Levine gregg.drwho8 at gmail.com "This signature fought the Time Wars, time and again." -- Cory Smelosky http://gewt.net/ Personal stuff http://gimme-sympathy.org Experiments

12 years, 2 months

Reviving the DECnet on TOPS-10 project

by b4＠gewt.net

On Tue, 14 May 2013, G. wrote: On Tue, 14 May 2013 08:00:52 -0000, you wrote: Unfortunately it only /mostly/ works. MARLEY TOPS-10 03:23:12 CTY system 1 Connected to Node MARLEY(0) Line # 632 [Checking terminal type . . . found VT100] ..LOGIN 1,2 ..R OPR [CCPWFD Waiting for file daemon to start] %%TTY STOMPER - Starting And it stalls right there unless I repeatedly hit Ctrl/C... That happened to me more than once with some older pre-built monitors, then went away when I did my own install and build of 7.04, so I do not have a solution, and at the time I hadn't any knowledge about TOPS-10. That does not mean that now I'm very proficient on it, but... I have the reverse issue, surprisingly. The monitor provided with TWONKY works fine, but my generated monitors do not work with it. Upon further investigation, the problem is with OPR.EXE. It WILL NOT execute on my generated monitor. The one provided with TWONKY works fine though. .... Make sure that ORION and other Galaxy processes are all there and that none of them shows a "^C" or "TO" status (IIRC). Also compare processes between TWONKY and your installation and see if there are any differences. It looks like I'm not linking something in to the monitor or not enabling a certain feature. It'd be helpful if TWONKY provided the output from the MONGEN dialogue... OPR is just a client that talks to a daemon process so maybe it just stalls because the daemon is not working, not responding, or not there. Compare contents of SYS:SYSJOB.INI too. HTH, G. -- Cory Smelosky http://gewt.net/ Personal stuff http://gimme-sympathy.org Experiments

12 years, 2 months

Console terminal switch and/or reverse terminal server suggestion?

by bqt＠softjar.se

On 2013-05-14 17:45, Bob Armstrong wrote: Johnny Billquist wrote: But any terminal server can also setup a service. Fred wrote: Created services on the DECServer that allow me to connect to the console of any host from any other host. I didn't think a DECserver could do this (or at least not an old, stupid one like a 100 or 200). You guys are saying it can? I'll go dust off an old DECserver and plug it in, and then I'll give it a try. With reservation for the DS100, which I think cannot do reverse LAT. It might also not be able to define services. It's been so long since I used one them, that I'm not totally sure. The DS200 will do it just fine though. Johnny

12 years, 2 months

Console terminal switch and/or reverse terminal server suggestion?

by ian＠platinum.net

Yes, like that. They are a 3u unit with 30 ports. There's a rarer version called the Portmaster 2 (without the E) that has 10 ports and is only 1u high. Exactly the same circuit board just a smaller case. Not sure what you mean by connect from one port to another? You can come in with a terminal on one port (I use a vt320) and bring up a login port. You log in to the terminal server. At this point you can attach to any other port. You can also telnet in via Ethernet. I've never tried it but I'm sure you can connect via a serial port on one of your machines (just as if it was a terminal) and log in to get you the prompt to connect to another port. Ian Sent from my iPhone On 2013-05-14, at 8:23 AM, "Bob Armstrong" <bob at jfcl.com> wrote: >I use Livingston Portmasters (like the 2e). Do you mean like this http://www.ebay.com/itm/Livingston-Portmaster-2E-PM2E-24-port-Communication… It s a big guy, isn t it ?? Can it connect directly from one port to another? Bob --- Filter service subscribers can train this email as spam or not-spam here

12 years, 2 months

Console terminal switch and/or reverse terminal server suggestion?

by bob＠jfcl.com

Johnny Billquist wrote: But any terminal server can also setup a service. Fred wrote: Created services on the DECServer that allow me to connect to the console of any host from any other host. I didn't think a DECserver could do this (or at least not an old, stupid one like a 100 or 200). You guys are saying it can? I'll go dust off an old DECserver and plug it in, and then I'll give it a try. Bob

12 years, 2 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

HECnet