HECnet

hecnet@lists.dfupdate.se

15 participants
15567 discussions

by wonko＠4amlunch.net

The Cisco Config Tool will be moving to a new host. I'm moving and won't have a static IP for a while. I've gotten a VPS VM that is going to run this all now. It will stay here forever. wiggum.4amlunch.net (65.19.130.45) Add this IP to your snmp allowed ACL. Don't remove the old one just yet. -brian

12 years, 2 months

Which DECnet interfaces support remote, unattended, booting?

by clemc＠ccc.com

On Fri, May 17, 2013 at 4:20 PM, Johnny Billquist <bqt at softjar.se> wrote: TU78 (1600/6250 bpi) in that case. Thanks for refresher - indeed - these were TU78s

12 years, 2 months

Which DECnet interfaces support remote, unattended, booting?

by clemc＠ccc.com

On Fri, May 17, 2013 at 3:49 PM, Cory Smelosky <b4 at gewt.net> wrote: Apparently utilities were included to write the image to the frontend filesystem. Yeah - I remember Sam grousing about how crude it alls was. I'm pretty sure he had his fingers in writing them. I know he used to come over to use the console on Sprite to test - as I said - we had hardware no one else on campus had.

12 years, 2 months

Dreaded Question: Licenses for Tru64?

by md.benson＠gmail.com

I know there's no Hobbyist scheme, but does anyone have any method of licensing Tru64? I have a nice shiny copy of 5.1B-2 that I got in the post and have installed on my PWS500au (don't panic, it's on a disk in the SBB shelf, I haven't overwritten OpenVMS!!). Is there any way to get a license (say, UNIX-WORKSTATION) for Tru64 and possibly also the LVM license? -- Mark Benson http://DECtec.info Twitter: @DECtecInfo HECnet: STAR69::MARK Online Resource & Mailing List for DEC Enthusiasts.

12 years, 2 months

Which DECnet interfaces support remote, unattended, booting?

by bqt＠softjar.se

On 2013-05-17 22:04, Paul_Koning at Dell.com wrote: On May 17, 2013, at 3:48 PM, Bob Armstrong wrote: Paul_Koning at Dell.com wrote: QNA is not the only horrible Ethernet interface DEC designed. The CNA (for the Pro bus) is.... Oh great, now what am I gonna do with my PRO-380?? :-) P/OS does support the CNA. And hopefully, some day DECnet/E will do likewise. Just not yet. I want to do it, but I only have about 10% of the necessary work completed. You have parts of RSTS/E running on the PRO? That would be pretty cool. Now, if I could only locate the sources for the PRO devices drivers under RSX, as well as the firmware, I could consider trying to release a new version of P/OS... ;-) Johnny -- Johnny Billquist || "I'm on a bus || on a psychedelic trip email: bqt at softjar.se || Reading murder books pdp is alive! || tryin' to stay hip" - B. Idol

12 years, 2 months

Which DECnet interfaces support remote, unattended, booting?

by bqt＠softjar.se

On 2013-05-17 21:48, Bob Armstrong wrote: Paul_Koning at Dell.com wrote: QNA is not the only horrible Ethernet interface DEC designed. The CNA (for the Pro bus) is.... Oh great, now what am I gonna do with my PRO-380?? :-) Send it my way? :-) Especially if it has a CNA. I have a -380 with the bitmap and extra memory, but no ethernet. It's occasionally been on HECnet, but using a serial line connection. (BEA::) FWIW, the DEQNA (M7504) does have an 8051 - it's at the back, next to the handle and the three LEDs. Saw Paul speculate on that one. I have no idea myself, and I have always been under the impression that the darn thing was done in discrete logic. Oh well... :-) Johnny -- Johnny Billquist || "I'm on a bus || on a psychedelic trip email: bqt at softjar.se || Reading murder books pdp is alive! || tryin' to stay hip" - B. Idol

12 years, 2 months

Which DECnet interfaces support remote, unattended, booting?

by bqt＠softjar.se

On 2013-05-17 21:45, Clem Cole wrote: On Fri, May 17, 2013 at 3:13 PM, Cory Smelosky <b4 at gewt.net <mailto:b4 at gewt.net>> wrote: How were the VAX BSDs installed then? Standalone bootloader on a floppy? Often - that was the way. There were TU58 tapes and floppies from Evans Hall that can with your 4.1BSD tapes that did the cold boot. That code contained enough of a system to talk to the tape drive. It would make sense. But I never saw such a thing with the MtXinu dist I had, which forced me to type the code in that was in the manual. :-) Maybe it got lost/mislaid or MtXinu differed... Before Kriddle and Asa would form MtXinu, a bunch of us in Cory Hall hacked to a raw boot system, and I do not remember why. IIRC it was Asa Romberger that did that hack, and he might have done it originally for IngVax. I do remember Bob would come to test it on one of my 780's (Sprite - aka UCBCAD) because we have newer/fancier/self threading 9-tracks with vacuum columns (model number escapes me) than we had in Evan. Most likely a TU77 (800/1600 bpi) or TU78 (1600/6250 bpi) in that case. Johnny -- Johnny Billquist || "I'm on a bus || on a psychedelic trip email: bqt at softjar.se || Reading murder books pdp is alive! || tryin' to stay hip" - B. Idol

12 years, 2 months

Which DECnet interfaces support remote, unattended, booting?

by Paul_Koning＠Dell.com

On May 17, 2013, at 3:48 PM, Bob Armstrong wrote: Paul_Koning at Dell.com wrote: QNA is not the only horrible Ethernet interface DEC designed. The CNA (for the Pro bus) is.... Oh great, now what am I gonna do with my PRO-380?? :-) P/OS does support the CNA. And hopefully, some day DECnet/E will do likewise. Just not yet. I want to do it, but I only have about 10% of the necessary work completed. FWIW, the DEQNA (M7504) does have an 8051 - it's at the back, next to the handle and the three LEDs. Interesting. I wonder what it does. I would think some control functions -- an 8051 isn't fast enough to be involved in the packet handling itself. paul

12 years, 2 months

Which DECnet interfaces support remote, unattended, booting?

by b4＠gewt.net

On 17 May 2013, at 15:45, "Clem Cole" <clemc at ccc.com> wrote: On Fri, May 17, 2013 at 3:13 PM, Cory Smelosky <b4 at gewt.net> wrote: How were the VAX BSDs installed then? Standalone bootloader on a floppy? Often - that was the way. There were TU58 tapes and floppies from Evans Hall that can with your 4.1BSD tapes that did the cold boot. That code contained enough of a system to talk to the tape drive. The Design and Implementation book would agree. ;) Apparently utilities were included to write the image to the frontend filesystem. Before Kriddle and Asa would form MtXinu, a bunch of us in Cory Hall hacked to a raw boot system, and I do not remember why. IIRC it was Asa Romberger that did that hack, and he might have done it originally for IngVax. I do remember Bob would come to test it on one of my 780's (Sprite - aka UCBCAD) because we have newer/fancier/self threading 9-tracks with vacuum columns (model number escapes me) than we had in Evan. We had 3 780s (Coke, Sprite and Tab) in the CAD group, but big (Sprite) was one donated by DEC and was one of the only ones on campus that did not have a lot of "foreign" hardware in it - so Sam Leffler, Bob and I would use it to do tests when we wanted to make sure the "Pure Maynard" stuff still worked.

12 years, 2 months

Which DECnet interfaces support remote, unattended, booting?

by bob＠jfcl.com

Paul_Koning at Dell.com wrote: QNA is not the only horrible Ethernet interface DEC designed. The CNA (for the Pro bus) is.... Oh great, now what am I gonna do with my PRO-380?? :-) FWIW, the DEQNA (M7504) does have an 8051 - it's at the back, next to the handle and the three LEDs. Bob

12 years, 2 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

HECnet