HECnet

hecnet@lists.dfupdate.se

5 participants
15580 discussions

Anyone got TOPS-20 / Ultrix with DECNET SIMH image ready to run?

by bob＠jfcl.com

does the MIPS version of Ultrix do DECNET? Yes, there was a DECnet kit for MIPS Ultrix. It's a separate product from the OS, though. Bob

12 years, 3 months

Anyone got TOPS-20 / Ultrix with DECNET SIMH image ready to run?

by sampsa＠mac.com

Quick question for those in the know - does the MIPS version of Ultrix do DECNET? The reason I ask is that I found something called GXemul that'll give me graphics more or less "natively"..Check it out: http://gxemul.sourceforge.net

12 years, 3 months

Anyone got TOPS-20 / Ultrix with DECNET SIMH image ready to run?

by jg＠jordi.guillaumes.name

Al 11/06/13 15:45, En/na Joe Ferraro ha escrit: Admittedly, posting without quick research, apologies... Where does one come by Ultrix sources these days, is it hobbyist licensable (or "abandonware"), and what hardware is needed? Joe On Tue, Jun 11, 2013 at 9:31 AM, Sampsa Laine <sampsa at mac.com> wrote: I'm going for Ultrix for now - I'm a total TOPS-20 noob, would need a lot of hand-holding to get the thing to run I fear... I would like to play with Ultrix too. I tried to install it some time ago and didn't succeed (no docs, a probably corrupted media image...). Are there viable media available somewhere? Docs?

12 years, 3 months

Anyone got TOPS-20 / Ultrix with DECNET SIMH image ready to run?

by jferraro＠gmail.com

Admittedly, posting without quick research, apologies... Where does one come by Ultrix sources these days, is it hobbyist licensable (or "abandonware"), and what hardware is needed? Joe On Tue, Jun 11, 2013 at 9:31 AM, Sampsa Laine <sampsa at mac.com> wrote: I'm going for Ultrix for now - I'm a total TOPS-20 noob, would need a lot of hand-holding to get the thing to run I fear... sampsa <sampsa at mac.com> mobile +961 788 10537 On 11 Jun 2013, at 11:36, Robert Jarratt <robert.jarratt at ntlworld.com> wrote: > > >> -----Original Message----- >> From: owner-hecnet at Update.UU.SE [mailto:owner- >> hecnet at Update.UU.SE] On Behalf Of Jordi Guillaumes i Pons >> Sent: 11 June 2013 09:13 >> To: hecnet at Update.UU.SE >> Cc: Sampsa Laine >> Subject: Re: [HECnet] Anyone got TOPS-20 / Ultrix with DECNET SIMH image >> ready to run? >> >> Al 11/06/13 10:05, En/na Sampsa Laine ha escrit: >>> Got some spare cycles/RAM on one of my boxes, would be fun to run >> TOPS-20 or Ultrix with DECNET? >>> >>> Anyone got a working image / HOWTO on getting this going? >> For TOPS-20, you can enable DECNET in the panda distribution with not too >> much effort. I tried to explain how to do it here: >> >> http://ancientbits.blogspot.com.es/2013/05/ten-over-pi.html >> >> The main problem is the network setup. You will have to work in shared >> mode and it can wreck the host machine NIC. > > Aren't we mixing up a couple of things here? > > The Panda distribution, as far as I know, runs on the KL, which SIMH does > not emulate. SIMH emulates the KS and right now you can't run DECnet on the > KS. There is work being done now to bring the KMC/DUP emulation to SIMH to > allow DECnet to run on the KS. You should contact the SIMH mailing list for > status on this. > > Regards > > Rob >

12 years, 3 months

Anyone got TOPS-20 / Ultrix with DECNET SIMH image ready to run?

by sampsa＠mac.com

I'm going for Ultrix for now - I'm a total TOPS-20 noob, would need a lot of hand-holding to get the thing to run I fear... sampsa <sampsa at mac.com> mobile +961 788 10537 On 11 Jun 2013, at 11:36, Robert Jarratt <robert.jarratt at ntlworld.com> wrote: -----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner- hecnet at Update.UU.SE] On Behalf Of Jordi Guillaumes i Pons Sent: 11 June 2013 09:13 To: hecnet at Update.UU.SE Cc: Sampsa Laine Subject: Re: [HECnet] Anyone got TOPS-20 / Ultrix with DECNET SIMH image ready to run? Al 11/06/13 10:05, En/na Sampsa Laine ha escrit: Got some spare cycles/RAM on one of my boxes, would be fun to run TOPS-20 or Ultrix with DECNET? Anyone got a working image / HOWTO on getting this going? For TOPS-20, you can enable DECNET in the panda distribution with not too much effort. I tried to explain how to do it here: http://ancientbits.blogspot.com.es/2013/05/ten-over-pi.html The main problem is the network setup. You will have to work in shared mode and it can wreck the host machine NIC. Aren't we mixing up a couple of things here? The Panda distribution, as far as I know, runs on the KL, which SIMH does not emulate. SIMH emulates the KS and right now you can't run DECnet on the KS. There is work being done now to bring the KMC/DUP emulation to SIMH to allow DECnet to run on the KS. You should contact the SIMH mailing list for status on this. Regards Rob

12 years, 3 months

Anyone got TOPS-20 / Ultrix with DECNET SIMH image ready to run?

by robert.jarratt＠ntlworld.com

-----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner- hecnet at Update.UU.SE] On Behalf Of Jordi Guillaumes i Pons Sent: 11 June 2013 09:13 To: hecnet at Update.UU.SE Cc: Sampsa Laine Subject: Re: [HECnet] Anyone got TOPS-20 / Ultrix with DECNET SIMH image ready to run? Al 11/06/13 10:05, En/na Sampsa Laine ha escrit: Got some spare cycles/RAM on one of my boxes, would be fun to run TOPS-20 or Ultrix with DECNET? Anyone got a working image / HOWTO on getting this going? For TOPS-20, you can enable DECNET in the panda distribution with not too much effort. I tried to explain how to do it here: http://ancientbits.blogspot.com.es/2013/05/ten-over-pi.html The main problem is the network setup. You will have to work in shared mode and it can wreck the host machine NIC. Aren't we mixing up a couple of things here? The Panda distribution, as far as I know, runs on the KL, which SIMH does not emulate. SIMH emulates the KS and right now you can't run DECnet on the KS. There is work being done now to bring the KMC/DUP emulation to SIMH to allow DECnet to run on the KS. You should contact the SIMH mailing list for status on this. Regards Rob

12 years, 3 months

Anyone got TOPS-20 / Ultrix with DECNET SIMH image ready to run?

by jg＠jordi.guillaumes.name

Al 11/06/13 10:13, En/na Sampsa Laine ha escrit: I'm running it in a VM (VirtualBox) - is this going to work? Indeed, and it is easier to make it work than in a real machine :) Just add a virtual NIC to be used by KLH10 in dedicated mode and you will be set. I used to run my TOPS-20 instance under a virtual box machine (with capped CPU) with one of those ultralean linux distros as host OS. IIRC the only weird thing I had to do was to force the vbox NICS at the host side (the "real" host) as promiscuous. Not sure why.

12 years, 3 months

Anyone got TOPS-20 / Ultrix with DECNET SIMH image ready to run?

by b4＠gewt.net

On Tue, 11 Jun 2013, Sampsa Laine wrote: I'm running it in a VM (VirtualBox) - is this going to work? Yes. Just add mutiple NICs for it. VirtualBox can do up to 4 iirc. Have one for accessing the host and dedicate a second one to TOPS-20. sampsa <sampsa at mac.com> mobile +961 788 10537 On 11 Jun 2013, at 10:12, Jordi Guillaumes i Pons <jg at jordi.guillaumes.name> wrote: Al 11/06/13 10:05, En/na Sampsa Laine ha escrit: Got some spare cycles/RAM on one of my boxes, would be fun to run TOPS-20 or Ultrix with DECNET? Anyone got a working image / HOWTO on getting this going? For TOPS-20, you can enable DECNET in the panda distribution with not too much effort. I tried to explain how to do it here: http://ancientbits.blogspot.com.es/2013/05/ten-over-pi.html The main problem is the network setup. You will have to work in shared mode and it can wreck the host machine NIC. -- Cory Smelosky http://gewt.net/ Personal stuff http://gimme-sympathy.org Experiments

12 years, 3 months

Anyone got TOPS-20 / Ultrix with DECNET SIMH image ready to run?

by b4＠gewt.net

On Tue, 11 Jun 2013, Sampsa Laine wrote: How hard is getting DECNET to run on these though? Easy as pie on TOPS-20. It's not hard in Ultrix either. It's a case of: 1). Install ULTRIX 2). Install DECnet tools 3). Run the DECnet configuration script You'll need a license for Ultrix...but those are easy to acquire. It's the same LMF format as used in Tru64. sampsa <sampsa at mac.com> mobile +961 788 10537 On 11 Jun 2013, at 10:10, Cory Smelosky <b4 at gewt.net> wrote: On Tue, 11 Jun 2013, Sampsa Laine wrote: Got some spare cycles/RAM on one of my boxes, would be fun to run TOPS-20 or Ultrix with DECNET? the PANDA distribution of TOPS-20 work OOTB. Anyone got a working image / HOWTO on getting this going? Ultrix isn't hard to get running. I can toss an image up somewhere sometime soon. sampsa <sampsa at mac.com> mobile +961 788 10537 -- Cory Smelosky http://gewt.net/ Personal stuff http://gimme-sympathy.org Experiments -- Cory Smelosky http://gewt.net/ Personal stuff http://gimme-sympathy.org Experiments

12 years, 3 months

Anyone got TOPS-20 / Ultrix with DECNET SIMH image ready to run?

by sampsa＠mac.com

I'm running it in a VM (VirtualBox) - is this going to work? sampsa <sampsa at mac.com> mobile +961 788 10537 On 11 Jun 2013, at 10:12, Jordi Guillaumes i Pons <jg at jordi.guillaumes.name> wrote: Al 11/06/13 10:05, En/na Sampsa Laine ha escrit: Got some spare cycles/RAM on one of my boxes, would be fun to run TOPS-20 or Ultrix with DECNET? Anyone got a working image / HOWTO on getting this going? For TOPS-20, you can enable DECNET in the panda distribution with not too much effort. I tried to explain how to do it here: http://ancientbits.blogspot.com.es/2013/05/ten-over-pi.html The main problem is the network setup. You will have to work in shared mode and it can wreck the host machine NIC.

12 years, 3 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

HECnet