HECnet

hecnet@lists.dfupdate.se

5 participants
15580 discussions

by b4＠gewt.net

On Fri, 12 Jul 2013, Johnny Billquist wrote: BAD in turn only updates the bad block list on the pack, and do nothing else. This is why these packs reserve the last track. That is where the bad block list is expected to reside, along with pack serial number. What if the last track ends up composed entirely of bad blocks? ;) -- Cory Smelosky http://gewt.net Personal stuff http://gimme-sympathy.org Projects

12 years, 2 months

Copying RL02 image under RSX

by bqt＠softjar.se

On 2013-07-12 00:51, Bob Armstrong wrote: I have an RL02 pack and a RSX system and I want to 1) copy a sector by sector image of the RL02 to a 20480 block file and then b) mount a new pack, BAD it, and then copy the same image back to the new pack. On VMS I d just use COPY /DEVICE or maybe BACKUP /PHYSICAL, but I m having a tough time figuring out the RSX equivalent. I thought PIP would do it, ( PIP FOO.IMG=DL0: ) but that fails if the disk isn t mounted or if it s mounted as /FOREIGN. I don t think BRU or DSC understand non-ODS volumes, and I don t know any other utilities that copy files. FWIW, the pack is from an ancient Unix and is not in Files11, RT11, or any other format that RSX knows about. Otherwise my only choice will be to fire up the 730 so I can get an RL02 attached to a real operating system J Eh... BAD is a BAD idea in this case. The problem with RL packs is that bad blocks are not hidden, but very visible. And the list of bad blocks are actually written on a disk block. The device driver does not do anything will the bad block information. Instead it is the file system initialization code which reads in the bad block list from the pack, and they allocate all the bad blocks on the pack to the [0,0]BADBLK.SYS file, so that they are not used by any other file. BAD in turn only updates the bad block list on the pack, and do nothing else. This is why these packs reserve the last track. That is where the bad block list is expected to reside, along with pack serial number. So if copy pack A to pack B, and you have bad blocks on pack A, they will also be marked as bad blocks on pack B, while if you have bad blocks on pack B, they will be forgotten. All that said, if you are running the latest version of RSX, the easiest way of copying is to use VCP. All that said, I think that BRU can also do the work, although I have not played with that. But check the /IMAGE switch to BRU... Johnny -- Johnny Billquist || "I'm on a bus || on a psychedelic trip email: bqt at softjar.se || Reading murder books pdp is alive! || tryin' to stay hip" - B. Idol

12 years, 2 months

More HECnet cisco reconfig...

by b4＠gewt.net

Can't remember your email off-hand, Brian. I need some modifications made, please. Change the source int for the tunnels to Dialer0 and set the hostname you use to dev.gimme-sympathy.org. I intend to switch to a static plan soon. ( My edge is currently a 3745 and I haven't quite figured out NAT and port access so it may not be allowing SNMP in. ;) ) Thanks! -- Cory Smelosky http://gewt.net Personal stuff http://gimme-sympathy.org Projects

12 years, 2 months

Copying RL02 image under RSX

by wilson＠dbit.com

From: "Bob Armstrong" <bob at jfcl.com> I thought the DL driver did the bad block revectoring. Only on RT. So reading an alien DL: or DM: pack (with random stuff at the end of block 1) on RT is a great way to scramble it. John Wilson D Bit

12 years, 2 months

Copying RL02 image under RSX

by bob＠jfcl.com

(That won't cope with bad blocks, though. Are you sure ? I thought the DL driver did the bad block revectoring. Bob

12 years, 2 months

Copying RL02 image under RSX

by Paul_Koning＠Dell.com

Perhaps simplest would be to boot a RSTS system on that machine, and write the 4 line Basic-PLUS program that will do the moral equivalent of "dd" to do the image copy. (That won't cope with bad blocks, though. In fact, if you have bad blocks in different spots on source vs. destination, you need a file structured copy.) paul On Jul 11, 2013, at 6:51 PM, Bob Armstrong wrote: I have an RL02 pack and a RSX system and I want to 1) copy a sector by sector image of the RL02 to a 20480 block file and then b) mount a new pack, BAD it, and then copy the same image back to the new pack. On VMS I d just use COPY /DEVICE or maybe BACKUP /PHYSICAL, but I m having a tough time figuring out the RSX equivalent. I thought PIP would do it, ( PIP FOO.IMG=DL0: ) but that fails if the disk isn t mounted or if it s mounted as /FOREIGN. I don t think BRU or DSC understand non-ODS volumes, and I don t know any other utilities that copy files. FWIW, the pack is from an ancient Unix and is not in Files11, RT11, or any other format that RSX knows about. Otherwise my only choice will be to fire up the 730 so I can get an RL02 attached to a real operating system :) Thanks, Bob

12 years, 2 months

Copying RL02 image under RSX

by bob＠jfcl.com

I have an RL02 pack and a RSX system and I want to 1) copy a sector by sector image of the RL02 to a 20480 block file and then b) mount a new pack, BAD it, and then copy the same image back to the new pack. On VMS I d just use COPY /DEVICE or maybe BACKUP /PHYSICAL, but I m having a tough time figuring out the RSX equivalent. I thought PIP would do it, ( PIP FOO.IMG=DL0: ) but that fails if the disk isn t mounted or if it s mounted as /FOREIGN. I don t think BRU or DSC understand non-ODS volumes, and I don t know any other utilities that copy files. FWIW, the pack is from an ancient Unix and is not in Files11, RT11, or any other format that RSX knows about. Otherwise my only choice will be to fire up the 730 so I can get an RL02 attached to a real operating system J Thanks, Bob

12 years, 2 months

Quick and nasty conversion of nodenames.dat for /etc/decnet.conf

by tonyblews＠gmail.com

So, I got bored, and bashed this thing together: #include <stdio.h> #include <string.h> int main(void) { char line[128]; char *nodenum, *nodename; int i; while (gets(line)!=NULL) { if (line[0] != ) { nodenum = strtok (line, \n ); nodename = strtok (NULL, \n ); for(i = 0; nodename[i]; i++) { nodename[i] = tolower(nodename[i]); } printf( node\t\t%s\t\tname\t\t%s\n ,nodenum,nodename); } } } So on the linux box: # gcc -o mkhecnodes mkhecnodes.c # dncopy 1.13::nodenames.dat nodenames.dat # ./mkhecnodes <nodenames.dat >> /etc/decnet.conf It works for me. Tony.

12 years, 2 months

RSX-11M-Plus Kit

by bqt＠softjar.se

On 2013-07-05 21:27, Steve Davidson wrote: Does anyone know where I can get the latest RSX-11M-Plus kit from? My kit is unreadable and the system disk has died so... Does anyone know who owns RSX anymore? I will go that route if necessary. Reply directly please... Thanks! trailing-edge have a disk image with the full kit, as far as I know. Johnny

12 years, 2 months

RSX-11M-Plus Kit

by jeep＠scshome.net

Does anyone know where I can get the latest RSX-11M-Plus kit from? My kit is unreadable and the system disk has died so... Does anyone know who owns RSX anymore? I will go that route if necessary. Reply directly please... Thanks! -Steve

12 years, 2 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

HECnet