HECnet

hecnet@lists.dfupdate.se

20 participants
15575 discussions

by bqt＠softjar.se

On 2013-09-08 15:48, Mark Darvill wrote: HI, I will be bringing up a new decnet area on hecnet (Area 22) in the near future. Can I please have info on the peering for IP and any other config details that may help. I will be using a DECbrouter 90 (Cisco) V11.1. So, anyone know if the DECrouter will do, and who would be willing to act as a peer? Johnny -- Johnny Billquist || "I'm on a bus || on a psychedelic trip email: bqt at softjar.se || Reading murder books pdp is alive! || tryin' to stay hip" - B. Idol

11 years, 10 months

Config Details Required

by mark.darvill＠mac.com

HI, I will be bringing up a new decnet area on hecnet (Area 22) in the near future. Can I please have info on the peering for IP and any other config details that may help. I will be using a DECbrouter 90 (Cisco) V11.1. Thanks, Mark

11 years, 10 months

multinet vs ucx

by system＠TMESIS.COM

Daniel Soderstrom <snaggs at mac.com> writes: Greetings, Im having some issues configuring my VAX 4000/90. Im lucky that the machines= I got didnt get wiped and came with vms 6.2 installed and licenced, as well= as a multinet and the net-app-sup-250 set. When I type in commands like finger, it says; MULTINET:FINGER Image file MULTINET:[SYSEXE]FINGER.EXE; Error in device name or inappropriate device type for operation Likewise if I type MULTINET CHECK I cant even get IP up yet. I noticed that many of the user ID's were on DKA2= 00, so i may be missing a disk. Any ideas of where to start? If I play with ucx will i break multinet if its been installed? NO. They're two complete and separate TCP/IP stack installations. You'll need to look for the Multinet installation directory and also through your system startup (SYS$STARTUP: and SYS$STARTUP:SYSTARTUP_VMS.COM) files to see if you are, indeed, starting Multinet. If UCX (TCPIP Services) has been configured to startup, you'll need to make a decision as to which one you want because you can only have one TCPIP stack. Assuming that your PAKs are valid for these two products, your issue would probably be one of just starting one over the other. -- VAXman- A Bored Certified VMS Kernel Mode Hacker VAXman(at)TMESIS(dot)ORG Well I speak to machines with the voice of humanity.

11 years, 11 months

From mholmes10

by mholmes10＠hotmail.com

Sorry about that. Do not know what the hell happened. Changed the password to the web mail. Usually only use my iPhone for email, but only seemed to do that to this account and mail list. Thanks for the heads up. Sent from my iPhone On Aug 22, 2013, at 7:02 PM, "Johnny Billquist" <bqt at softjar.se> wrote: On 2013-08-22 23:34, Cory Smelosky wrote: On Thu, 22 Aug 2013, Michael Holmes wrote: What the hell? Like Greg said. Mike have been hacked, or else have some virus problems, or something... Mike, please respond asap that you have things under control, or else I'm going to kick you off the list... Johnny

11 years, 11 months

multinet vs ucx

by hvlems＠zonnet.nl

You can install both ucx and multinet but use just one of course. Is dka200 used in systartup_vms or in files called by it? Hans Van: Daniel Soderstrom Verzonden: zondag 1 september 2013 02:04 Aan: hecnet at update.uu.se Beantwoorden: hecnet at Update.UU.SE Onderwerp: [HECnet] multinet vs ucx Greetings, Im having some issues configuring my VAX 4000/90. Im lucky that the machines I got didnt get wiped and came with vms 6.2 installed and licenced, as well as a multinet and the net-app-sup-250 set. When I type in commands like finger, it says; MULTINET:FINGER Image file MULTINET:[SYSEXE]FINGER.EXE; Error in device name or inappropriate device type for operation Likewise if I type MULTINET CHECK I cant even get IP up yet. I noticed that many of the user ID's were on DKA200, so i may be missing a disk. Any ideas of where to start? If I play with ucx will i break multinet if its been installed? Regards, Daniel. Perth, Australia Sent from my iPad

11 years, 11 months

multinet vs ucx

by snaggs＠mac.com

Greetings, Im having some issues configuring my VAX 4000/90. Im lucky that the machines I got didnt get wiped and came with vms 6.2 installed and licenced, as well as a multinet and the net-app-sup-250 set. When I type in commands like finger, it says; MULTINET:FINGER Image file MULTINET:[SYSEXE]FINGER.EXE; Error in device name or inappropriate device type for operation Likewise if I type MULTINET CHECK I cant even get IP up yet. I noticed that many of the user ID's were on DKA200, so i may be missing a disk. Any ideas of where to start? If I play with ucx will i break multinet if its been installed? Regards, Daniel. Perth, Australia Sent from my iPad

11 years, 11 months

Building SIMH (any version after the networking arrived)

by Mark＠infocomm.com

Hi Gregg, On Tuesday, August 27, 2013 at 10:43 AM, Gregg Levine wrote: Hello! I'm trying to get the release from the GIT storage point to build properly, that is with networking enabled on my Raspberry Pi. Oddly enough when I spent an annoying several hours earlier this month getting the creation from 7/26/2013 to be installed correctly, one thing I didn't install was the library behind the tcpdump program. What did you do to resolve this install of the 'library behind the tcpdump program'? What is the make output produced when you try to build a network capable simulator (PDP11 or any VAX)? What command did you enter to attempt this build? With that installed I thought it would be enough to dynamically enable networking. It wasn't. The build process constantly insists it is doing so without networking enabled, and that I need to read the enclosed document on that method. I did. It told me exactly what to do, then what to do when running things, and so on. What is the make output produced when you try to build a network capable simulator (PDP11 or any VAX)? If you have the proper libpcap development components installed on your Linux environment, then the makefile will automatically build a network capable simulator. You DO NOT need to specify anything extra to create encourage this. Numerous folks (myself included) have built network capable simulators on the Raspberry Pi platform. I don't recall having to hunt down any libpcap stuff for this platform, but I may have. I did this probably a year ago, so I used the available Raspberry Pi Linux distribution which was available at that time. I have not tried from scratch recently. Before I try and ruffle a few feathers on the regular SIMH list I was wondering if anyone in here has any suggestions. This would be a perfect opportunity to create an issue at https://github.com/simh/simh/issues so we can understand what is happening for you and head off the same issue for other folks in the future. Feel free to answer the above questions when you create that issue.... Thanks. - Mark

11 years, 11 months

Building SIMH (any version after the networking arrived)

by gregg.drwho8＠gmail.com

Hello! I'm trying to get the release from the GIT storage point to build properly, that is with networking enabled on my Raspberry Pi. Oddly enough when I spent an annoying several hours earlier this month getting the creation from 7/26/2013 to be installed correctly, one thing I didn't install was the library behind the tcpdump program. With that installed I thought it would be enough to dynamically enable networking. It wasn't. The build process constantly insists it is doing so without networking enabled, and that I need to read the enclosed document on that method. I did. It told me exactly what to do, then what to do when running things, and so on. Before I try and ruffle a few feathers on the regular SIMH list I was wondering if anyone in here has any suggestions. No I don't have any specific idea, its just something else for the device to do. Especially since the release in the GIT arrangement contains methods for talking to an external serial console. ----- Gregg C Levine gregg.drwho8 at gmail.com "This signature fought the Time Wars, time and again."

11 years, 11 months

From mholmes10

by bqt＠softjar.se

On 2013-08-22 23:34, Cory Smelosky wrote: On Thu, 22 Aug 2013, Michael Holmes wrote: What the hell? Like Greg said. Mike have been hacked, or else have some virus problems, or something... Mike, please respond asap that you have things under control, or else I'm going to kick you off the list... Johnny

11 years, 11 months

From mholmes10

by b4＠gewt.net

On Thu, 22 Aug 2013, Michael Holmes wrote: What the hell? -- Cory Smelosky http://gewt.net Personal stuff http://gimme-sympathy.org Projects

11 years, 11 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

HECnet