Brian,
It has been a while but I am ready to bring up GRE on my cisco 1841. What peer address should I use to get things going so you can download the other tunnel peers via SNMP?
Also how do I need to setup SNMP to allow you to do this?
Thanks, Mark
]
On 9 Sep 2013, at 18:09, Brian Hechinger <wonko at 4amlunch.net> wrote:
On Sun, Sep 08, 2013 at 11:22:43AM -0400, Dave McGuire wrote:
On 09/08/2013 10:23 AM, Mark Darvill wrote:
I will be bringing up a new decnet area on hecnet (Area 22) in the near
future.
Can I please have info on the peering for IP and any other config
details that may help. I will be using a DECbrouter 90 (Cisco) V11.1.
So, anyone know if the DECrouter will do, and who would be willing to
act as a peer?
Johnny
V11.1 supports GRE, Decnet IV Level 1 and 2 so I am hoping so. :-)
Brian can get you hooked up with his automatic meshed-tunnel config
generator, when he catches up on list mail.
Things have been very busy, but I will try to get this dealt with this
week. I'm actually moving everything to a new colo box so this will
coincide with everyone needing to change the IP they allow SNMP to come
from.
Mark, as soon as I've moved everything I'll let you know what you need
to do.
-brian
Anybody here know how good the JIT CPU speed enhancement is on the non-free version of EmuVM..
I'm considering replacing CHIMPY with a virtualised 2 CPU / 1 GB box with a large-ish disk on my new general VM hosting server, basically to save on space and electricity (well and I can then take an Alpha with me to Lebanon to play with, too :)
So I'm getting about 100 MIPS according Whetstone on the free version (I believe it's actually capped) vs 400 MIPS on the DS10-466MHz.
Any idea what a 2.93 GHz Xeon X7350 would give me with the JIT acceleration turned on?
Sampsa
Hello!
Interesting. No machines playing this game of yours Sampsa named JOSHUA?
And I arranged the lag personally. I felt that we needed some
excitement into this activity.
-----
Gregg C Levine gregg.drwho8 at gmail.com
"This signature fought the Time Wars, time and again."
On Fri, Dec 20, 2013 at 5:35 PM, Sampsa Laine <sampsa at mac.com> wrote:
Yeah, because I'd hacked the source code to make they in a more sane arrangement.
And it didn't compile on VAX after I seem to recall..
sampsa <sampsa at mac.com>
mobile +44 7961 149465
On 21 Dec 2013, at 00:32, Joe Ferraro <jferraro at gmail.com> wrote:
We were using FALKEN but the hardware died a sudden death a while back... WOPR is a game machine, but vax... if i recall, you wanted to keep it on AXP!?!
On Fri, Dec 20, 2013 at 2:22 PM, Sampsa Laine <sampsa at mac.com> wrote:
UK, London specifically.
Last year we came across the same issue, I believe WOPR (?) was setup to run a US version of the software..
sampsa <sampsa at mac.com>
mobile +44 7961 149465
On 20 Dec 2013, at 21:19, Joshua Benedetto <dasbooterror at gmail.com> wrote:
My buddy who was playing under 'Budster' was going well, but the lag was simply too much to deal with from the US. Where is CHIMPY at these days?
On Fri, Dec 20, 2013 at 2:08 PM, Sampsa Laine <sampsa at mac.com> wrote:
ELEVEN DAYS LEFT UNTIL THE DEADLINE!
The CHIMPY:: 2013 Retro VT100 Challenge closes at 23:59 GMT on 31-DEC-2013.
At the moment, the leaders are (only the top two players are awarded):
1. Mark Holmes with a score of 9,816
2. Mark Wickens with a score of 7,640
Unfortunately the mystery player vola1 disappeared with his score of over 11,000 - make sure you screen shot your result when entering you name into the leaderboard, and send it to me.
Come on guys, let's get over 10K this year as well, SET HOST to CHIMPY and log in as TETRIS...
sampsa <sampsa at mac.com>
mobile +44 7961 149465
Yeah, because I'd hacked the source code to make they in a more sane arrangement.
And it didn't compile on VAX after I seem to recall..
sampsa <sampsa at mac.com>
mobile +44 7961 149465
On 21 Dec 2013, at 00:32, Joe Ferraro <jferraro at gmail.com> wrote:
We were using FALKEN but the hardware died a sudden death a while back... WOPR is a game machine, but vax... if i recall, you wanted to keep it on AXP!?!
On Fri, Dec 20, 2013 at 2:22 PM, Sampsa Laine <sampsa at mac.com> wrote:
UK, London specifically.
Last year we came across the same issue, I believe WOPR (?) was setup to run a US version of the software..
sampsa <sampsa at mac.com>
mobile +44 7961 149465
On 20 Dec 2013, at 21:19, Joshua Benedetto <dasbooterror at gmail.com> wrote:
My buddy who was playing under 'Budster' was going well, but the lag was simply too much to deal with from the US. Where is CHIMPY at these days?
On Fri, Dec 20, 2013 at 2:08 PM, Sampsa Laine <sampsa at mac.com> wrote:
ELEVEN DAYS LEFT UNTIL THE DEADLINE!
The CHIMPY:: 2013 Retro VT100 Challenge closes at 23:59 GMT on 31-DEC-2013.
At the moment, the leaders are (only the top two players are awarded):
1. Mark Holmes with a score of 9,816
2. Mark Wickens with a score of 7,640
Unfortunately the mystery player vola1 disappeared with his score of over 11,000 - make sure you screen shot your result when entering you name into the leaderboard, and send it to me.
Come on guys, let's get over 10K this year as well, SET HOST to CHIMPY and log in as TETRIS...
sampsa <sampsa at mac.com>
mobile +44 7961 149465
We were using FALKEN but the hardware died a sudden death a while back... WOPR is a game machine, but vax... if i recall, you wanted to keep it on AXP!?!
On Fri, Dec 20, 2013 at 2:22 PM, Sampsa Laine <sampsa at mac.com> wrote:
UK, London specifically.
Last year we came across the same issue, I believe WOPR (?) was setup to run a US version of the software..
sampsa <sampsa at mac.com>
mobile +44 7961 149465
On 20 Dec 2013, at 21:19, Joshua Benedetto <dasbooterror at gmail.com> wrote:
>
> My buddy who was playing under 'Budster' was going well, but the lag was simply too much to deal with from the US. Where is CHIMPY at these days?
>
> On Fri, Dec 20, 2013 at 2:08 PM, Sampsa Laine <sampsa at mac.com> wrote:
> ELEVEN DAYS LEFT UNTIL THE DEADLINE!
>
> The CHIMPY:: 2013 Retro VT100 Challenge closes at 23:59 GMT on 31-DEC-2013.
>
> At the moment, the leaders are (only the top two players are awarded):
>
> 1. Mark Holmes with a score of 9,816
> 2. Mark Wickens with a score of 7,640
>
> Unfortunately the mystery player vola1 disappeared with his score of over 11,000 - make sure you screen shot your result when entering you name into the leaderboard, and send it to me.
>
> Come on guys, let's get over 10K this year as well, SET HOST to CHIMPY and log in as TETRIS...
>
> sampsa <sampsa at mac.com>
> mobile +44 7961 149465
>
>
Hello!
That does make things difficult.
So what are you going to do? I don't think XXDP can remotely manage
the system wired next to it.
-----
Gregg C Levine gregg.drwho8 at gmail.com
"This signature fought the Time Wars, time and again."
On Thu, Dec 19, 2013 at 8:49 PM, Cory Smelosky <b4 at gewt.net> wrote:
On Fri, 20 Dec 2013, Jerome H. Fine wrote:
Cory Smelosky wrote:
Evening,
If I misunderstood your question (you did mention a MVIII in
the Subject), then please clarify.
I can't get the 11/23+ (or the RX50 for that matter...) to work, so I can
only use the KA650.
Jerome Fine
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
On Fri, 20 Dec 2013, Jerome H. Fine wrote:
Cory Smelosky wrote:
Evening,
If I misunderstood your question (you did mention a MVIII in
the Subject), then please clarify.
I can't get the 11/23+ (or the RX50 for that matter...) to work, so I can
only use the KA650.
Jerome Fine
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
Hello!
Cory if they do not, then I can aim two copies your way. Big problem
will be making the right arrangements to send them to you.
-----
Gregg C Levine gregg.drwho8 at gmail.com
"This signature fought the Time Wars, time and again."
On Thu, Dec 19, 2013 at 8:42 PM, Jerome H. Fine <jhfinedp3k at compsys.to> wrote:
Cory Smelosky wrote:
Evening,
Anyone have a copy of an image? I can't find an image with a quick google
and I lack a tape drive so I'll need to do a bit of hackey stuff to boot it
anyway.
I need it in order to format an ST-251 as I can't get my damn 11/23+
working.
XXDP uses ZRQC?? to format an RD31 (ST-251? - right
now I can't remember) for the RQDX3 controller. I assume
that since you are using a PDP-11/23+, you are on a Qbus
system, probably a BA23 and you also have an RX50.
bitsavers should have all the XXDP images. If you can't find
them there, lets us know and I am confident that someone
can help. Your can use PUTR from John Wilson to copy
the RX50 image to a 5 1/4" on a PC using a HD floppy drive.
Don't forget to use 360K DSDD 5 1/4" media, NOT 1.2M
HD 5 1/4" media.
If I misunderstood your question (you did mention a MVIII in
the Subject), then please clarify.
Jerome Fine
>Cory Smelosky wrote:
Evening,
Anyone have a copy of an image? I can't find an image with a quick google and I lack a tape drive so I'll need to do a bit of hackey stuff to boot it anyway.
I need it in order to format an ST-251 as I can't get my damn 11/23+ working.
XXDP uses ZRQC?? to format an RD31 (ST-251? - right
now I can't remember) for the RQDX3 controller. I assume
that since you are using a PDP-11/23+, you are on a Qbus
system, probably a BA23 and you also have an RX50.
bitsavers should have all the XXDP images. If you can't find
them there, lets us know and I am confident that someone
can help. Your can use PUTR from John Wilson to copy
the RX50 image to a 5 1/4" on a PC using a HD floppy drive.
Don't forget to use 360K DSDD 5 1/4" media, NOT 1.2M
HD 5 1/4" media.
If I misunderstood your question (you did mention a MVIII in
the Subject), then please clarify.
Jerome Fine
Evening,
Anyone have a copy of an image? I can't find an image with a quick google
and I lack a tape drive so I'll need to do a bit of hackey stuff to boot
it anyway.
I need it in order to format an ST-251 as I can't get my damn 11/23+
working.
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
