Hi all,
For those of you who are running SIMH on Raspberry Pi, how are you getting around the fact that lots of writes on your SD card will eventually trash it? I am considering moving my VAX instance to my Raspi, but didn't want to eat an SD card ... ;)
Is it as simple as perhaps mounting the VAX .dsk via NFS and letting SIMH use that, instead of the card?
Thanks,
Fred
----
Lets call it for what it is - "legacy" is a term that people use in a
polite but derogatory manner to imply that the future direction they
prefer is not that which they view as the current direction.
>John Wilson wrote:
V7.1 of Ersatz-11 is done. New features include:
- DMP11/DMV11 network ports.
- DDCMP over TCP and UDP (as well as serial lines).
- Kermit client for transferring files in and out of the PDP-11 over any
emulated serial line (KERMIT command and KERMIT: pseudo-driver).
- "MOUNT ddcu: BAD: /LIST:badblks.txt ..." adds fake bad blocks (from a
list in a file) to any disk (for testing PDP-11 utilities).
- "MOUNT ddcu: ... {/NOPAD | /PAD:NULL | /PAD:RAM}" selects how to handle
emulating disks with an image file (or physical drive) that's smaller
than the drive being emulated. (/PAD:RAM is currently an experimental
feature and may have bugs -- it's intended for systems that use the tail
end of the drive as swap space.)
- DPDISK: and DPTAPE: (BOTH UNSUPPORTED) set up dual-ported disks and tapes.
Any disk or tape type can be mounted on one of these pseudo-devices, after
which units 0 and 1 of the pseudo-device represent the two ports which may
in turn each be mounted on different PDP-11 controllers, presumably on
different processors of a multi-processor system.
- "SET TTu: DL11A" (needed by DOS/BATCH for TT0:).
Impressive list of new features!! As usual, congratulations for a
job well done.
- "SET PCLOG n" enlarges the number of logged PC values that can be shown
with SHOW PCLOG.
This will be the big one for me as I want to be able to check it against
a similar (NEWLY added) feature in SDHX.SYS for RT-11. Of course,
your PCLOG adds only about 8% to 10% additional time. In SD:,
my initial benchmark suggests at least a HUNDRED times longer.
In addition, for SDHX.SYS, the current size of the PC Address
circular buffer is only 3000 PC Addresses which, although much
larger than the original 64, can't compete against a VERY large "n".
- New native "SYS" utilities for Linux, OS/2, and Windows, for making disks
(or flash drives) boot the stand-alone version of E11. The Linux and
Windows versions try to notice if a drive (e.g. USB flash card that came
pre-partitioned) hasn't been made "active" and/or is missing the MBR
bootstrap, and fixes it (may require privs). If anyone can please tell
me what sys calls in OS/2 will find out which physical drive owns a FAT
volume given the drive letter, I'd appreciate it!
- The stand-alone version's bootstrap supports USB drives (including flash).
Also there's a bootable CD, but since there's currently no ATAPI dev
driver or ISO9660 FS driver, it can't install E11 onto a hard drive, and
it requires a FAT volume to hold .DSK files etc. So it's more of a proof
of concept than something useful (but it's an easy way to try out the
stand-alone version of E11).
Bug fixes and tweaks as usual (sorry about that .TAP seeking thing in V7.0!).
As usual, the Demo version can be downloaded from:
http://www.dbit.com/demo.html
Jerome Fine
Hello!
In fact Brian, much as I find this discussion both amusing and
informative, he's right. I have practically all the versions here that
he's written. Exceptions are this version, soon to resolved, and the
one before it. I think I have the 0.8 one and the 0.9 and the 1s also
the 2s. '
But as I said, I've got most of them.
Great stuff there John, I'll do that one RSN.
-----
Gregg C Levine gregg.drwho8 at gmail.com
"This signature fought the Time Wars, time and again."
On Mon, Jun 2, 2014 at 8:40 PM, John Wilson <wilson at dbit.com> wrote:
From: Brian Hechinger <wonko at 4amlunch.net>
I'll never forget you (John) telling me about E11 in your kitchen all those
years ago.
Some things never change ... in fact as far as I can tell *nothing* ever
changes. I've been writing the same program for over 20 years and I still
haven't cleaned up that kitchen (or sold the ramshackle hovel it's in,
since I haven't lived there in ages). I hope things are good with you!
John
From: Brian Hechinger <wonko at 4amlunch.net>
I'll never forget you (John) telling me about E11 in your kitchen all those
years ago.
Some things never change ... in fact as far as I can tell *nothing* ever
changes. I've been writing the same program for over 20 years and I still
haven't cleaned up that kitchen (or sold the ramshackle hovel it's in,
since I haven't lived there in ages). I hope things are good with you!
John
That is one hell of a list of features. Especially for a point release!
I'll never forget you (John) telling me about E11 in your kitchen all those years ago. You continually impress me with this thing. :)
-brian
On Jun 2, 2014, at 19:19, Dave McGuire <mcguire at neurotica.com> wrote:
SuhWEET!!
On 06/02/2014 07:16 PM, John Wilson wrote:
V7.1 of Ersatz-11 is done. New features include:
- DMP11/DMV11 network ports.
- DDCMP over TCP and UDP (as well as serial lines).
- Kermit client for transferring files in and out of the PDP-11 over any
emulated serial line (KERMIT command and KERMIT: pseudo-driver).
- "MOUNT ddcu: BAD: /LIST:badblks.txt ..." adds fake bad blocks (from a
list in a file) to any disk (for testing PDP-11 utilities).
- "MOUNT ddcu: ... {/NOPAD | /PAD:NULL | /PAD:RAM}" selects how to handle
emulating disks with an image file (or physical drive) that's smaller
than the drive being emulated. (/PAD:RAM is currently an experimental
feature and may have bugs -- it's intended for systems that use the tail
end of the drive as swap space.)
- DPDISK: and DPTAPE: (BOTH UNSUPPORTED) set up dual-ported disks and tapes.
Any disk or tape type can be mounted on one of these pseudo-devices, after
which units 0 and 1 of the pseudo-device represent the two ports which may
in turn each be mounted on different PDP-11 controllers, presumably on
different processors of a multi-processor system.
- "SET TTu: DL11A" (needed by DOS/BATCH for TT0:).
- "SET PCLOG n" enlarges the number of logged PC values that can be shown
with SHOW PCLOG.
- New native "SYS" utilities for Linux, OS/2, and Windows, for making disks
(or flash drives) boot the stand-alone version of E11. The Linux and
Windows versions try to notice if a drive (e.g. USB flash card that came
pre-partitioned) hasn't been made "active" and/or is missing the MBR
bootstrap, and fixes it (may require privs). If anyone can please tell
me what sys calls in OS/2 will find out which physical drive owns a FAT
volume given the drive letter, I'd appreciate it!
- The stand-alone version's bootstrap supports USB drives (including flash).
Also there's a bootable CD, but since there's currently no ATAPI dev
driver or ISO9660 FS driver, it can't install E11 onto a hard drive, and
it requires a FAT volume to hold .DSK files etc. So it's more of a proof
of concept than something useful (but it's an easy way to try out the
stand-alone version of E11).
Bug fixes and tweaks as usual (sorry about that .TAP seeking thing in V7.0!).
As usual, the Demo version can be downloaded from:
http://www.dbit.com/demo.html
John Wilson
D Bit
--
Dave McGuire, AK4HZ
New Kensington, PA
SuhWEET!!
On 06/02/2014 07:16 PM, John Wilson wrote:
V7.1 of Ersatz-11 is done. New features include:
- DMP11/DMV11 network ports.
- DDCMP over TCP and UDP (as well as serial lines).
- Kermit client for transferring files in and out of the PDP-11 over any
emulated serial line (KERMIT command and KERMIT: pseudo-driver).
- "MOUNT ddcu: BAD: /LIST:badblks.txt ..." adds fake bad blocks (from a
list in a file) to any disk (for testing PDP-11 utilities).
- "MOUNT ddcu: ... {/NOPAD | /PAD:NULL | /PAD:RAM}" selects how to handle
emulating disks with an image file (or physical drive) that's smaller
than the drive being emulated. (/PAD:RAM is currently an experimental
feature and may have bugs -- it's intended for systems that use the tail
end of the drive as swap space.)
- DPDISK: and DPTAPE: (BOTH UNSUPPORTED) set up dual-ported disks and tapes.
Any disk or tape type can be mounted on one of these pseudo-devices, after
which units 0 and 1 of the pseudo-device represent the two ports which may
in turn each be mounted on different PDP-11 controllers, presumably on
different processors of a multi-processor system.
- "SET TTu: DL11A" (needed by DOS/BATCH for TT0:).
- "SET PCLOG n" enlarges the number of logged PC values that can be shown
with SHOW PCLOG.
- New native "SYS" utilities for Linux, OS/2, and Windows, for making disks
(or flash drives) boot the stand-alone version of E11. The Linux and
Windows versions try to notice if a drive (e.g. USB flash card that came
pre-partitioned) hasn't been made "active" and/or is missing the MBR
bootstrap, and fixes it (may require privs). If anyone can please tell
me what sys calls in OS/2 will find out which physical drive owns a FAT
volume given the drive letter, I'd appreciate it!
- The stand-alone version's bootstrap supports USB drives (including flash).
Also there's a bootable CD, but since there's currently no ATAPI dev
driver or ISO9660 FS driver, it can't install E11 onto a hard drive, and
it requires a FAT volume to hold .DSK files etc. So it's more of a proof
of concept than something useful (but it's an easy way to try out the
stand-alone version of E11).
Bug fixes and tweaks as usual (sorry about that .TAP seeking thing in V7.0!).
As usual, the Demo version can be downloaded from:
http://www.dbit.com/demo.html
John Wilson
D Bit
--
Dave McGuire, AK4HZ
New Kensington, PA
V7.1 of Ersatz-11 is done. New features include:
- DMP11/DMV11 network ports.
- DDCMP over TCP and UDP (as well as serial lines).
- Kermit client for transferring files in and out of the PDP-11 over any
emulated serial line (KERMIT command and KERMIT: pseudo-driver).
- "MOUNT ddcu: BAD: /LIST:badblks.txt ..." adds fake bad blocks (from a
list in a file) to any disk (for testing PDP-11 utilities).
- "MOUNT ddcu: ... {/NOPAD | /PAD:NULL | /PAD:RAM}" selects how to handle
emulating disks with an image file (or physical drive) that's smaller
than the drive being emulated. (/PAD:RAM is currently an experimental
feature and may have bugs -- it's intended for systems that use the tail
end of the drive as swap space.)
- DPDISK: and DPTAPE: (BOTH UNSUPPORTED) set up dual-ported disks and tapes.
Any disk or tape type can be mounted on one of these pseudo-devices, after
which units 0 and 1 of the pseudo-device represent the two ports which may
in turn each be mounted on different PDP-11 controllers, presumably on
different processors of a multi-processor system.
- "SET TTu: DL11A" (needed by DOS/BATCH for TT0:).
- "SET PCLOG n" enlarges the number of logged PC values that can be shown
with SHOW PCLOG.
- New native "SYS" utilities for Linux, OS/2, and Windows, for making disks
(or flash drives) boot the stand-alone version of E11. The Linux and
Windows versions try to notice if a drive (e.g. USB flash card that came
pre-partitioned) hasn't been made "active" and/or is missing the MBR
bootstrap, and fixes it (may require privs). If anyone can please tell
me what sys calls in OS/2 will find out which physical drive owns a FAT
volume given the drive letter, I'd appreciate it!
- The stand-alone version's bootstrap supports USB drives (including flash).
Also there's a bootable CD, but since there's currently no ATAPI dev
driver or ISO9660 FS driver, it can't install E11 onto a hard drive, and
it requires a FAT volume to hold .DSK files etc. So it's more of a proof
of concept than something useful (but it's an easy way to try out the
stand-alone version of E11).
Bug fixes and tweaks as usual (sorry about that .TAP seeking thing in V7.0!).
As usual, the Demo version can be downloaded from:
http://www.dbit.com/demo.html
John Wilson
D Bit
Kudos to your friend!
Erik
On Sun, Jun 01, 2014 at 01:46:20PM +0200, Johnny Billquist wrote:
On 2014-05-31 11:31, Sampsa Laine wrote:
Anybody know of a terminal program that'll do Sixels?
A friend of mine have added it to xterm. He's also working on ReGIS.
I don't know if he's release it yet, but you could search around...
Johnny
Sampsa
On 31 May 2014, at 11:50, Cory Smelosky <b4 at gewt.net> wrote:
On Sat, 31 May 2014, Erik Olofsen wrote:
At RULLFS::[.SEM] I typed in some of the code; sem3 doesn't work yet,
but sem2 does and is available at the task server.
Instead of using the graphics library the output is done in... sixels.
An example can be viewed with the sem button at
Looks like I need to fix up that VT340. ;)
http://rullf2.xs4all.nl/sg/sg.html
Erik
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
On 2014-05-31 11:31, Sampsa Laine wrote:
Anybody know of a terminal program that'll do Sixels?
A friend of mine have added it to xterm. He's also working on ReGIS. I don't know if he's release it yet, but you could search around...
Johnny
Sampsa
On 31 May 2014, at 11:50, Cory Smelosky <b4 at gewt.net> wrote:
On Sat, 31 May 2014, Erik Olofsen wrote:
At RULLFS::[.SEM] I typed in some of the code; sem3 doesn't work yet,
but sem2 does and is available at the task server.
Instead of using the graphics library the output is done in... sixels.
An example can be viewed with the sem button at
Looks like I need to fix up that VT340. ;)
http://rullf2.xs4all.nl/sg/sg.html
Erik
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
On 2014-05-31 01:30, Jean-Yves Bernier wrote:
At 11:29 PM +0200 30/5/14, Johnny Billquist wrote:
I have a version of MicroEMACS running under RSX. :-)
Does it handle more than 24 lines?
On screen? Not under RSX, but I don't remember the code in any detail, so I don't know if it could.
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
