HECnet

hecnet@lists.dfupdate.se

4 participants
15588 discussions

Alpha VMS Decnet PhaseIV install kit for 8.3

by sampsa＠mac.com

Actually I had the whole 8.3 install CD on the machine itself as a scratch disk, thanks for your help though! Sampsa On 7 Sep 2009, at 19:38, Kari Uusim ki wrote: Sampsa Laine wrote: Anyone happen to have this? I just brought up my Alphaserver 4100 but it has decnet-plus installed, I'd rather install DecnetIV and get it onto HECnet - alas I can't seem to find my VMS install CDs anywhere. Sampsa . Are you able to download it with FTP or DECnet-over-IP? I can put the kit on my Alpha.

16 years, 4 months

Alpha VMS Decnet PhaseIV install kit for 8.3

by uusimaki＠exdecfinland.org

Sampsa Laine wrote: Anyone happen to have this? I just brought up my Alphaserver 4100 but it has decnet-plus installed, I'd rather install DecnetIV and get it onto HECnet - alas I can't seem to find my VMS install CDs anywhere. Sampsa . Are you able to download it with FTP or DECnet-over-IP? I can put the kit on my Alpha.

16 years, 4 months

Alpha VMS Decnet PhaseIV install kit for 8.3

by sampsa＠mac.com

Anyone happen to have this? I just brought up my Alphaserver 4100 but it has decnet-plus installed, I'd rather install DecnetIV and get it onto HECnet - alas I can't seem to find my VMS install CDs anywhere. Sampsa

16 years, 4 months

GORVAX up again, new IP

by christine.caulfield＠googlemail.com

On 03/09/09 08:33, Sampsa Laine wrote: I'd forgotten to bring up GORVAX properly, sorry about that, should work now. Sampsa Sampsa, I'm sure you had a multinet link from GORVAX to my area (3) at one stage, but it's not running now. I suspect my IP address has changed a couple of times since it last worked, it's now 86.10.38.192. I can't remember what the old IP was but it very likely began with 82 or 86! I've set up the link at my end, so if you can reconfigure yours it should burst into life ;-) Chrissie

16 years, 4 months

GORVAX up again, new IP

by sampsa＠mac.com

I'd forgotten to bring up GORVAX properly, sorry about that, should work now. Sampsa On 3 Sep 2009, at 02:04, Bob Armstrong wrote: listening on IP address 188.220.59.24. I changed the IP for your connection on CODA, but it's not connecting. Are you sure your end is set up correctly? Your router's not filtering the packets for Multinet or anything?? Bob

16 years, 4 months

GORVAX up again, new IP

by bob＠jfcl.com

listening on IP address 188.220.59.24. I changed the IP for your connection on CODA, but it's not connecting. Are you sure your end is set up correctly? Your router's not filtering the packets for Multinet or anything?? Bob

16 years, 4 months

GORVAX up again, new IP

by sampsa＠mac.com

Guys, I've finally managed to get myself back online, GORVAX and my bridge are up, listening on IP address 188.220.59.24. Please update your side of the setup to reflect this if you connect to me. Sampsa

16 years, 4 months

VAX/VMS V5.5-2 LAT bugs?

by mark＠wickensonline.co.uk

Zane H. Healy wrote: On Mon, 31 Aug 2009, Mark Wickens wrote: Sorry for the blatent request out of the blue, but I don't suppose you've got installation media for 5.5-2, or know someone who has. I am running VAX APL 4.0 on a VAXstation 4000/90 under OpenVMS 7.3 but there are some compatibility issues with DECwindows which I think are too obvious to have occured with the targetted release of OpenVMS for APL which was 5.4. I think 5.5-2 is the earliest version that supports the 4000/90 so am interested in giving that a whirl to see if it improves matters. Are you able to access stuff through HECnet? V5.5-2 is on the Hobbyist V1 CD-ROM. I'd have to find it which may take a while. Zane Hi Zane, As soon as Johnny has a few free minutes the plan is to get one of the VAX 4000/90s up on HECnet. So the answer is hopefully soon. Regards, Mark.

16 years, 4 months

VAX/VMS V5.5-2 LAT bugs?

by healyzh＠aracnet.com

On Mon, 31 Aug 2009, Mark Wickens wrote: Sorry for the blatent request out of the blue, but I don't suppose you've got installation media for 5.5-2, or know someone who has. I am running VAX APL 4.0 on a VAXstation 4000/90 under OpenVMS 7.3 but there are some compatibility issues with DECwindows which I think are too obvious to have occured with the targetted release of OpenVMS for APL which was 5.4. I think 5.5-2 is the earliest version that supports the 4000/90 so am interested in giving that a whirl to see if it improves matters. Are you able to access stuff through HECnet? V5.5-2 is on the Hobbyist V1 CD-ROM. I'd have to find it which may take a while. Zane

16 years, 4 months

VAX/VMS V5.5-2 LAT bugs?

by mark＠wickensonline.co.uk

Zane H. Healy wrote: Is anyone aware of any known bugs related to LAT on V5.5-2? I turned on LAT on PDXVAX yesterday and was logged in via LAT with a VT420 connected to a DECserver 90TL. At some point it crashed and had to be rebooted. As PDXVAX is a very stable system, I tend to suspect LAT. Zane Sorry, that reply-to often catches me out. I guess if anyone else can help out that would be great too. Thanks, Mark.

16 years, 4 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

HECnet