Cool, that worked.
But I'm still stuck :)
What I'm trying to do is to attach a PPP service to this port, and then be able to connect to that from my DECserver. I've set up the PPP service:
TCPIP SET INTERFACE PP1 /SERIAL_DEVICE=LTA777: /HOST=192.168.77.246 -
/NETWORK_MASK=255.255.255.0 /DESTINATION=192.168.77.151 /COMPRESS=AUTO
But doing a SET HOST/LAT CHIMPYNET does not work - any ideas where I'm going wrong?
Some output:
CHIMPYSYS$ lcp show service chimpynet
Service Name: CHIMPYNET Service Type: Application
Service Status: Available Connections: Enabled
Service Password: Disabled Queueing: Enabled
Service Ident: CHIMPY - OpenVMS 8.3 on AlphaServer 800 5/333
Service Ports: _LTA777:
Node Name Status Rating Identification
CHIMPY On 28 D CHIMPY - OpenVMS 8.3 on AlphaServer 800 5/333
CHIMPYSYS$ lcp show port lta777
Local Port Name: _LTA777: Local Port Type: Dedicated (Queued)
Local Port State: Inactive
Connected Link:
Target Port Name: Actual Port Name:
Target Node Name: Actual Node Name:
Target Service Name: CHIMPYNET Actual Service Name:
CHIMPYSYS$ set host/lat chimpynet
%LAT-F-CONFAIL, connection to CHIMPYNET not established
-LAT-F-LRJINUSE, port or service in use
-LAT-I-END, control returned to node CHIMPY
On 4 Oct 2009, at 20:50, Kari Uusim ki wrote:
Sampsa Laine wrote:
Guys,
I'm trying to set up an incoming LAT service on CHIMPY called SAMPSACOM, i.e. I want to be able to connect to a service called SAMPSACOM over LAT and this connection is then routed to port LTA101: - I will have an app on CHIMPY that waits for connections on LTA101.
I've done this:
lcp:==mcr latcp
lcp create port lta101: /dedicated
lcp set port lta101: /dedicated /service=sampsacom
Now what? If I try to connect to the port (via set host/dte) I get an error:
%REM-E-PORTRXERR, port receive error
-SYSTEM-F-HANGUP, data set hang-up
It doesn't show up in SHOW SERVICES and SHOW PORTS says it's inactive:
$lcp show ports *
[....]
_LTA101: Dedicated Inactive //SAMPSACOM
Any help on how to proceed would be most welcome.
Sampsa
.
First you should create the service
$ MC LATCP CREA SERVI /APPL
Then create the port
$ MC LATCP CREA PORT /DEDI
And then associate the port with your service
$ MC LATCP SET PORT /DEDI /SERVI
Then start your application which listens to the LAT port.
Kari
Thanks!
Sampsa
On 4 Oct 2009, at 20:50, Kari Uusim ki wrote:
Sampsa Laine wrote:
Guys,
I'm trying to set up an incoming LAT service on CHIMPY called SAMPSACOM, i.e. I want to be able to connect to a service called SAMPSACOM over LAT and this connection is then routed to port LTA101: - I will have an app on CHIMPY that waits for connections on LTA101.
I've done this:
lcp:==mcr latcp
lcp create port lta101: /dedicated
lcp set port lta101: /dedicated /service=sampsacom
Now what? If I try to connect to the port (via set host/dte) I get an error:
%REM-E-PORTRXERR, port receive error
-SYSTEM-F-HANGUP, data set hang-up
It doesn't show up in SHOW SERVICES and SHOW PORTS says it's inactive:
$lcp show ports *
[....]
_LTA101: Dedicated Inactive //SAMPSACOM
Any help on how to proceed would be most welcome.
Sampsa
.
First you should create the service
$ MC LATCP CREA SERVI /APPL
Then create the port
$ MC LATCP CREA PORT /DEDI
And then associate the port with your service
$ MC LATCP SET PORT /DEDI /SERVI
Then start your application which listens to the LAT port.
Kari
Sampsa Laine wrote:
Guys,
I'm trying to set up an incoming LAT service on CHIMPY called SAMPSACOM, i.e. I want to be able to connect to a service called SAMPSACOM over LAT and this connection is then routed to port LTA101: - I will have an app on CHIMPY that waits for connections on LTA101.
I've done this:
lcp:==mcr latcp
lcp create port lta101: /dedicated
lcp set port lta101: /dedicated /service=sampsacom
Now what? If I try to connect to the port (via set host/dte) I get an error:
%REM-E-PORTRXERR, port receive error
-SYSTEM-F-HANGUP, data set hang-up
It doesn't show up in SHOW SERVICES and SHOW PORTS says it's inactive:
$lcp show ports *
[....]
_LTA101: Dedicated Inactive //SAMPSACOM
Any help on how to proceed would be most welcome.
Sampsa
.
First you should create the service
$ MC LATCP CREA SERVI /APPL
Then create the port
$ MC LATCP CREA PORT /DEDI
And then associate the port with your service
$ MC LATCP SET PORT /DEDI /SERVI
Then start your application which listens to the LAT port.
Kari
Guys,
I'm trying to set up an incoming LAT service on CHIMPY called SAMPSACOM, i.e. I want to be able to connect to a service called SAMPSACOM over LAT and this connection is then routed to port LTA101: - I will have an app on CHIMPY that waits for connections on LTA101.
I've done this:
lcp:==mcr latcp
lcp create port lta101: /dedicated
lcp set port lta101: /dedicated /service=sampsacom
Now what? If I try to connect to the port (via set host/dte) I get an error:
%REM-E-PORTRXERR, port receive error
-SYSTEM-F-HANGUP, data set hang-up
It doesn't show up in SHOW SERVICES and SHOW PORTS says it's inactive:
$lcp show ports *
[....]
_LTA101: Dedicated Inactive //SAMPSACOM
Any help on how to proceed would be most welcome.
Sampsa
On Sat, 2009-10-03 at 01:18 +0100, Sampsa Laine wrote:
Does anybody have a copy of the clients of this lying around, either
Mac or Win32?
Sampsa
Yes, it might even be available on the server - I'll have to fire it up and check.
Mark.
Sampsa Laine wrote:
Does anybody have a copy of the clients of this lying around, either Mac or Win32?
Sampsa
.
Do you have the VMS Software Products Library from recent years?
There used to be the Pathworks32 client disk also.
Kari
yeah, and it's as fast as it'll get.
Also google tells me there was a 3rd party product called TSSnet...
im still digging!
On Fri, Oct 2, 2009 at 9:01 PM, Sampsa Laine <sampsa at mac.com> wrote:
That's a brilliant idea! I'm going to do that actually.
Sampsa
On 3 Oct 2009, at 01:58, Jason Stevens wrote:
I installed on an IDE flash disk that is connected to an IDE/SCSI bridge....
The flash card is 8GB.
It should pretty much work with anything I would imagine under 32gb....
On Fri, Oct 2, 2009 at 8:56 PM, Sampsa Laine <sampsa at mac.com> wrote:
I tried the install floppy, it saw my devices on the bus, but didnt allow me to format them.
Come to think of it, i think the Sun disk box i connected to it might be RAIDed or something.
I'll try again soon.
On 3 Oct 2009, at 01:54, Jason Stevens wrote:
It shouldn't be that involved, but I recall it taking FOREVER...... I recall doing a 2gig macos, and then 2gig UFS partitions from there...
my quadra if off right now I'd have to recable to get it back online but it wasn't tooo bad, the bigger issue was recognizing the CD-ROM.. I managed to score an apple 150 to do the load...
At least the A/UX install floppy will let you format non apple hard disks....!
On Fri, Oct 2, 2009 at 8:52 PM, Sampsa Laine <sampsa at mac.com> wrote:
Yeah, got the max sims waiting to be installed. I've also got a CDROM drive that's MEAT to work.
I can't figure out how to format the damn disks though
On 3 Oct 2009, at 01:48, Jason Stevens wrote:
It's a painfull install, but once it's done it's GREAT!!!... It's the OSX of the 1980's!
SYSVr2 & System 7.
Naturally you'll want LOTS of ram!!
On Fri, Oct 2, 2009 at 8:45 PM, Sampsa Laine <sampsa at mac.com> wrote:
Nice, I've got a Quadra 650 and an SE/30 - thinking about rolling out A/UX on the quadra, just for fun :)
Sampsa
On 3 Oct 2009, at 01:44, Jason Stevens wrote:
That'd be cool, I even have a Quadra 700 that'd be nice to connect up.....
That's a brilliant idea! I'm going to do that actually.
Sampsa
On 3 Oct 2009, at 01:58, Jason Stevens wrote:
I installed on an IDE flash disk that is connected to an IDE/SCSI bridge....
The flash card is 8GB.
It should pretty much work with anything I would imagine under 32gb....
On Fri, Oct 2, 2009 at 8:56 PM, Sampsa Laine <sampsa at mac.com> wrote:
I tried the install floppy, it saw my devices on the bus, but didnt allow me to format them.
Come to think of it, i think the Sun disk box i connected to it might be RAIDed or something.
I'll try again soon.
On 3 Oct 2009, at 01:54, Jason Stevens wrote:
It shouldn't be that involved, but I recall it taking FOREVER...... I recall doing a 2gig macos, and then 2gig UFS partitions from there...
my quadra if off right now I'd have to recable to get it back online but it wasn't tooo bad, the bigger issue was recognizing the CD-ROM.. I managed to score an apple 150 to do the load...
At least the A/UX install floppy will let you format non apple hard disks....!
On Fri, Oct 2, 2009 at 8:52 PM, Sampsa Laine <sampsa at mac.com> wrote:
Yeah, got the max sims waiting to be installed. I've also got a CDROM drive that's MEAT to work.
I can't figure out how to format the damn disks though
On 3 Oct 2009, at 01:48, Jason Stevens wrote:
It's a painfull install, but once it's done it's GREAT!!!... It's the OSX of the 1980's!
SYSVr2 & System 7.
Naturally you'll want LOTS of ram!!
On Fri, Oct 2, 2009 at 8:45 PM, Sampsa Laine <sampsa at mac.com> wrote:
Nice, I've got a Quadra 650 and an SE/30 - thinking about rolling out A/UX on the quadra, just for fun :)
Sampsa
On 3 Oct 2009, at 01:44, Jason Stevens wrote:
That'd be cool, I even have a Quadra 700 that'd be nice to connect up.....
I installed on an IDE flash disk that is connected to an IDE/SCSI bridge....
The flash card is 8GB.
It should pretty much work with anything I would imagine under 32gb....
On Fri, Oct 2, 2009 at 8:56 PM, Sampsa Laine <sampsa at mac.com> wrote:
I tried the install floppy, it saw my devices on the bus, but didnt allow me to format them.
Come to think of it, i think the Sun disk box i connected to it might be RAIDed or something.
I'll try again soon.
On 3 Oct 2009, at 01:54, Jason Stevens wrote:
It shouldn't be that involved, but I recall it taking FOREVER...... I recall doing a 2gig macos, and then 2gig UFS partitions from there...
my quadra if off right now I'd have to recable to get it back online but it wasn't tooo bad, the bigger issue was recognizing the CD-ROM.. I managed to score an apple 150 to do the load...
At least the A/UX install floppy will let you format non apple hard disks....!
On Fri, Oct 2, 2009 at 8:52 PM, Sampsa Laine <sampsa at mac.com> wrote:
Yeah, got the max sims waiting to be installed. I've also got a CDROM drive that's MEAT to work.
I can't figure out how to format the damn disks though
On 3 Oct 2009, at 01:48, Jason Stevens wrote:
It's a painfull install, but once it's done it's GREAT!!!... It's the OSX of the 1980's!
SYSVr2 & System 7.
Naturally you'll want LOTS of ram!!
On Fri, Oct 2, 2009 at 8:45 PM, Sampsa Laine <sampsa at mac.com> wrote:
Nice, I've got a Quadra 650 and an SE/30 - thinking about rolling out A/UX on the quadra, just for fun :)
Sampsa
On 3 Oct 2009, at 01:44, Jason Stevens wrote:
That'd be cool, I even have a Quadra 700 that'd be nice to connect up.....
