HECnet

hecnet@lists.dfupdate.se

4 participants
15592 discussions

Anyone with a spare MMJ cable + RS232 adapter?

by sampsa＠mac.com

Or other sane mechanism for getting a graphical console up on an AS800? I want to add some controllers and drives to CHIMPY? Sampsa

14 years, 6 months

VMS Bound Volume Sets...

by hvlems＠zonnet.nl

Bind sets are hell to restore. Which is probably why Hoff is against them. A RAID controller is a good idea: form shadow sets and stripe them. The Mylex 960 series can handdle RAID volumes up to 36 GB (IIRC). So you'd need another controller. Not all controllers are supported b VMS, e.g.: kZPCC. ------Origineel bericht------ Van: MG Afzender: owner-hecnet at Update.UU.SE Aan: hecnet at Update.UU.SE Beantwoorden: hecnet at Update.UU.SE Onderwerp: Re: [HECnet] VMS Bound Volume Sets... Verzonden: 29 augustus 2011 20:25 On 29-8-2011 18:59, Mark Wickens wrote: Anyone tried bound volume sets? I want 70GBs worth of data to appear in one VMS device, but only have 36GB drives, so would like to span data across two disks and form a logical drive. Just wondered if anyone had any thoughts - Hoff seemed to think it was a bad thing to try/do. What about using a hardware RAID controller, a la Smart Array? (If it is an AlphaServer or Integrity system of course, in this case.) I use an SA6400 successfully to do that, in one of my rx2600s. - MG Verzonden vanaf mijn draadloze BlackBerry -toestel

14 years, 6 months

Noob question: Changing the Time Zone on my VMS boxes?

by hvlems＠zonnet.nl

You mean $ set time/cluster or $ mc sysgen Set env/cluster Do set time=new time ? ------Origineel bericht------ Van: Mark Wickens Afzender: owner-hecnet at Update.UU.SE Aan: hecnet at Update.UU.SE Beantwoorden: hecnet at Update.UU.SE Onderwerp: Re: [HECnet] Noob question: Changing the Time Zone on my VMS boxes? Verzonden: 29 augustus 2011 23:02 On 28/08/11 21:39, hvlems at zonnet.nl wrote: I forgot $ sho ti. Which tells you what the system tme is ------Origineel bericht------ Van: gerry77 at mail.com Afzender: owner-hecnet at Update.UU.SE Aan: hecnet at Update.UU.SE Beantwoorden: hecnet at Update.UU.SE Onderwerp: Re: [HECnet] Noob question: Changing the Time Zone on my VMS boxes? Verzonden: 28 augustus 2011 20:41 On Sun, 28 Aug 2011 19:35:28 +0100, you wrote: How do I change the time zone of a VMS box? $ @SYS$MANAGER:UTC$TIME_SETUP :-) Then you may also do the following: $ @SYS$MANAGER:TCPIP$DEFINE_COMMANDS $ NTPDATE<ntp.server.of.your.choice> HTH, G. Verzonden vanaf mijn draadloze BlackBerry -toestel I happened to be reading the SYSMAN manual earlier (as you do) and noticed there is a command to synchronise time between boxes across a network cluster. Just one of those snippets of info that might be of interest now (or sometime in the future). Regards, Mark. Verzonden vanaf mijn draadloze BlackBerry -toestel

14 years, 6 months

Noob question: Changing the Time Zone on my VMS boxes?

by mark＠wickensonline.co.uk

On 28/08/11 21:39, hvlems at zonnet.nl wrote: I forgot $ sho ti. Which tells you what the system tme is ------Origineel bericht------ Van: gerry77 at mail.com Afzender: owner-hecnet at Update.UU.SE Aan: hecnet at Update.UU.SE Beantwoorden: hecnet at Update.UU.SE Onderwerp: Re: [HECnet] Noob question: Changing the Time Zone on my VMS boxes? Verzonden: 28 augustus 2011 20:41 On Sun, 28 Aug 2011 19:35:28 +0100, you wrote: How do I change the time zone of a VMS box? $ @SYS$MANAGER:UTC$TIME_SETUP :-) Then you may also do the following: $ @SYS$MANAGER:TCPIP$DEFINE_COMMANDS $ NTPDATE<ntp.server.of.your.choice> HTH, G. Verzonden vanaf mijn draadloze BlackBerry -toestel I happened to be reading the SYSMAN manual earlier (as you do) and noticed there is a command to synchronise time between boxes across a network cluster. Just one of those snippets of info that might be of interest now (or sometime in the future). Regards, Mark.

14 years, 6 months

VMS Bound Volume Sets...

by marcogb＠xs4all.nl

On 29-8-2011 18:59, Mark Wickens wrote: Anyone tried bound volume sets? I want 70GBs worth of data to appear in one VMS device, but only have 36GB drives, so would like to span data across two disks and form a logical drive. Just wondered if anyone had any thoughts - Hoff seemed to think it was a bad thing to try/do. What about using a hardware RAID controller, a la Smart Array? (If it is an AlphaServer or Integrity system of course, in this case.) I use an SA6400 successfully to do that, in one of my rx2600s. - MG

14 years, 6 months

Noob question: Changing the Time Zone on my VMS boxes?

by hvlems＠zonnet.nl

I forgot $ sho ti. Which tells you what the system tme is ------Origineel bericht------ Van: gerry77 at mail.com Afzender: owner-hecnet at Update.UU.SE Aan: hecnet at Update.UU.SE Beantwoorden: hecnet at Update.UU.SE Onderwerp: Re: [HECnet] Noob question: Changing the Time Zone on my VMS boxes? Verzonden: 28 augustus 2011 20:41 On Sun, 28 Aug 2011 19:35:28 +0100, you wrote: How do I change the time zone of a VMS box? $ @SYS$MANAGER:UTC$TIME_SETUP :-) Then you may also do the following: $ @SYS$MANAGER:TCPIP$DEFINE_COMMANDS $ NTPDATE <ntp.server.of.your.choice> HTH, G. Verzonden vanaf mijn draadloze BlackBerry -toestel

14 years, 6 months

Noob question: Changing the Time Zone on my VMS boxes?

by hvlems＠zonnet.nl

And perhaps you need to change the actual time on the system: $ set time="28-AUG-2011" $ set time="21:36" ------Origineel bericht------ Van: gerry77 at mail.com Afzender: owner-hecnet at Update.UU.SE Aan: hecnet at Update.UU.SE Beantwoorden: hecnet at Update.UU.SE Onderwerp: Re: [HECnet] Noob question: Changing the Time Zone on my VMS boxes? Verzonden: 28 augustus 2011 20:41 On Sun, 28 Aug 2011 19:35:28 +0100, you wrote: How do I change the time zone of a VMS box? $ @SYS$MANAGER:UTC$TIME_SETUP :-) Then you may also do the following: $ @SYS$MANAGER:TCPIP$DEFINE_COMMANDS $ NTPDATE <ntp.server.of.your.choice> HTH, G. Verzonden vanaf mijn draadloze BlackBerry -toestel

14 years, 6 months

Noob question: Changing the Time Zone on my VMS boxes?

by gerry77＠mail.com

On Sun, 28 Aug 2011 19:35:28 +0100, you wrote: How do I change the time zone of a VMS box? $ @SYS$MANAGER:UTC$TIME_SETUP :-) Then you may also do the following: $ @SYS$MANAGER:TCPIP$DEFINE_COMMANDS $ NTPDATE <ntp.server.of.your.choice> HTH, G.

14 years, 6 months

Noob question: Changing the Time Zone on my VMS boxes?

by sampsa＠mac.com

Having (with some difficulty) connected GORVAX and RHESUS to an Arcsight log monitoring beast (think SAP meets Splunk) I notice all my events' end times are off by a consistent number of hours.. I believe this is due to the time zone info (which I never bothered to look into) being wrong. How do I change the time zone of a VMS box? Sampsa

14 years, 6 months

DECUS/freeware archive

by jeep＠scshome.net

I have the VMS 7.3 for VAX, what I don't have are the patches. -Steve -----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of hvlems at zonnet.nl Sent: Thursday, August 25, 2011 01:18 To: hecnet at Update.UU.SE Subject: Re: [HECnet] DECUS/freeware archive Do you need a copy of the 7.3 cd? ------Origineel bericht------ Van: Steve Davidson Afzender: owner-hecnet at Update.UU.SE Aan: hecnet at Update.UU.SE Beantwoorden: hecnet at Update.UU.SE Onderwerp: RE: [HECnet] DECUS/freeware archive Verzonden: 25 augustus 2011 02:33 How about pulling down VMS 7.3 for VAX? -Steve -----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Mark Wickens Sent: Wednesday, August 24, 2011 12:31 To: hecnet at Update.UU.SE Subject: [HECnet] DECUS/freeware archive Jur has just posted back my hard drive with his entire DECUS & freeware archive - hopefully I can make this available to the HECnet community in its entirety via the magic of decnet... I'm also trying to sort out my HP patch database access, so if there are any requests feel free to ask. I am planning on pulling down all patches for OpenVMS VAX 7.3.1, Alpha 8.3 and IA64 8.3-1H1. Regards, Mark. Verzonden vanaf mijn draadloze BlackBerry(r)-toestel

14 years, 6 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

HECnet