Wow, that's pretty much exactly what I needed to get started, thanks!
-brian
On 12/29/2011 11:02 AM, Steve Davidson wrote:
Brian,
MWATCH.COM is in my home directory on RIFTER::. Any questions just ask.
Enjoy!
-Steve
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On
Behalf Of Brian Hechinger
Sent: Thursday, December 29, 2011 10:39 AM
To: hecnet at Update.UU.SE
Subject: [HECnet] DCL Help needed
Ok, so if I were doing this in Korn or Bash I'd be done by now. :-D
I've found search, i've figured out how to redirect output and input, so
i've got some basics figured out.
What I need to figure out now is how to walk a text file line by line
and pull out specific records. Normally I would use awk for such a task.
How would I go about doing this from within a DCL script?
-brian
Correct!
-Steve
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On
Behalf Of Brian Hechinger
Sent: Thursday, December 29, 2011 11:02 AM
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] DCL Help needed
I'm assuming mwatch.com in your home dir is it?
-brian
On 12/29/2011 10:58 AM, Steve Davidson wrote:
Brian,
I will copy the MultiWatch DCL script to RIFTER::. Take a look at
that.
It should have everything you need!
-Steve
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On
Behalf Of Brian Hechinger
Sent: Thursday, December 29, 2011 10:39 AM
To: hecnet at Update.UU.SE
Subject: [HECnet] DCL Help needed
Ok, so if I were doing this in Korn or Bash I'd be done by now. :-D
I've found search, i've figured out how to redirect output and input,
so
i've got some basics figured out.
What I need to figure out now is how to walk a text file line by line
and pull out specific records. Normally I would use awk for such a
task.
How would I go about doing this from within a DCL script?
-brian
I'm assuming mwatch.com in your home dir is it?
-brian
On 12/29/2011 10:58 AM, Steve Davidson wrote:
Brian,
I will copy the MultiWatch DCL script to RIFTER::. Take a look at that.
It should have everything you need!
-Steve
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On
Behalf Of Brian Hechinger
Sent: Thursday, December 29, 2011 10:39 AM
To: hecnet at Update.UU.SE
Subject: [HECnet] DCL Help needed
Ok, so if I were doing this in Korn or Bash I'd be done by now. :-D
I've found search, i've figured out how to redirect output and input, so
i've got some basics figured out.
What I need to figure out now is how to walk a text file line by line
and pull out specific records. Normally I would use awk for such a task.
How would I go about doing this from within a DCL script?
-brian
Brian,
MWATCH.COM is in my home directory on RIFTER::. Any questions just ask.
Enjoy!
-Steve
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On
Behalf Of Brian Hechinger
Sent: Thursday, December 29, 2011 10:39 AM
To: hecnet at Update.UU.SE
Subject: [HECnet] DCL Help needed
Ok, so if I were doing this in Korn or Bash I'd be done by now. :-D
I've found search, i've figured out how to redirect output and input, so
i've got some basics figured out.
What I need to figure out now is how to walk a text file line by line
and pull out specific records. Normally I would use awk for such a task.
How would I go about doing this from within a DCL script?
-brian
Brian,
I will copy the MultiWatch DCL script to RIFTER::. Take a look at that.
It should have everything you need!
-Steve
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On
Behalf Of Brian Hechinger
Sent: Thursday, December 29, 2011 10:39 AM
To: hecnet at Update.UU.SE
Subject: [HECnet] DCL Help needed
Ok, so if I were doing this in Korn or Bash I'd be done by now. :-D
I've found search, i've figured out how to redirect output and input, so
i've got some basics figured out.
What I need to figure out now is how to walk a text file line by line
and pull out specific records. Normally I would use awk for such a task.
How would I go about doing this from within a DCL script?
-brian
SG1:: it is... You will see email in a few minutes.
-Steve
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On
Behalf Of Brian Hechinger
Sent: Thursday, December 29, 2011 9:57 AM
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] unable to connect to listener
Whichever you think is more appropriate for the task. SG1 would be nice
so I can test set host if ncp is being wonky.
-brian
On 12/29/2011 9:17 AM, Steve Davidson wrote:
Brian,
I will create an account for you on SG1:: or SGC:: (or both if you
wish)
so that you can build (and test) your DCL script. Access will be
either
telnet or ssh. I will send you the specifics to your account on
RIFTER::.
Enjoy!
-Steve
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On
Behalf Of Brian Hechinger
Sent: Thursday, December 29, 2011 9:12 AM
To: hecnet at Update.UU.SE
Subject: [HECnet] unable to connect to listener
RIFTER$ mcr ncp show known circuits
Known Circuit Volatile Summary as of 29-DEC-2011 09:05:41
Circuit State Loopback Adjacent
Name Routing Node
QNA-0 on
TCP-0-19 on 19.41 (SG1)
TCP-0-33 on -starting
RIFTER$ mcr ncp tell sg1 show known circuits
%NCP-F-CONNEC, unable to connect to listener
-SYSTEM-F-UNREACHABLE, remote node is not currently reachable
RIFTER$
This has worked in the past, but now I can't connect.
Oh, and now it worked:
RIFTER$ mcr ncp tell sg1 show known circuits
Known Circuit Volatile Summary as of 29-DEC-2011 09:11:01
Circuit State Loopback Adjacent
Name Routing Node
SVA-0 on 11.2 (MAISA)
SVA-0 4.249 (SLAVE)
SVA-0 1.300 (CTAKAH)
SVA-0 6.1 (STAR69)
SVA-0 19.40 (SGC)
SVA-0 42.1 (CANADA)
SVA-0 2.1 (LEGATO)
SVA-0 1.13 (MIM)
SVA-0 44.43 (OZON)
TCP-0-0 on 19.301 (DUSTY)
TCP-0-2 on 2.1 (LEGATO)
TCP-0-20 on 20.1 (WOPR)
TCP-0-3 on 3.47 (RVDSXL)
TCP-0-33 on 33.14 (FRUGAL)
TCP-0-4 on -starting
TCP-0-52 on 52.2 (RIFTER)
TCP-0-59 on 59.58 (STUPI)
TCP-0-6 on 6.134 (ROOSTA)
TCP-0-8 on 8.400 (GORVAX)
RIFTER$
Is there any way to figure out why I keep losing connectivity like
that?
Could it just be the tunnel bouncing?
This is going to complicate my plans to write a DCL script to walk the
circuits to attempt to map them. :-D
-brian
Ok, so if I were doing this in Korn or Bash I'd be done by now. :-D
I've found search, i've figured out how to redirect output and input, so i've got some basics figured out.
What I need to figure out now is how to walk a text file line by line and pull out specific records. Normally I would use awk for such a task.
How would I go about doing this from within a DCL script?
-brian
