-----Original Message-----
From: owner-hecnet at Update.UU.SE
[mailto:owner-hecnet at Update.UU.SE] On Behalf Of Mark Wickens
Sent: Saturday, February 04, 2012 12:44
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] Help requested with issue regarding
file transfer...
On 04/02/12 17:19, Oleg Safiullin wrote:
UAF> ADD/PROXY SLAVE::allin1 A1$XFER_OUT
Is this proxy command appropriate in this case? I thought maybe it
should be A1$XFER_IN?
Any help gratefully appreciated.
Thanks, Mark.
Not sure, but ADD/PROXY SLAVE::allin1 A1$XFER_OUT/DEF may help.
Bizarrely (and I'm sure Steve Davidson will have something to
say about
this) the instructions are telling you to set up the proxy
the wrong way round.
When I added the proxy on the target system back to the
system doing the copying it worked fine.
... onto the next step...
Regards, Mark.
Mark,
Are you all set with this?
-Steve
On 04/02/12 17:19, Oleg Safiullin wrote:
UAF> ADD/PROXY SLAVE::allin1 A1$XFER_OUT
Is this proxy command appropriate in this case? I thought maybe it should be A1$XFER_IN?
Any help gratefully appreciated.
Thanks, Mark.
Not sure, but ADD/PROXY SLAVE::allin1 A1$XFER_OUT/DEF may help.
No, I'm wrong, it's in the manual, it's just in a subsequent section which doesn't really help when you're following the instructions step-by-step.
Mark.
On 04/02/12 17:19, Oleg Safiullin wrote:
UAF> ADD/PROXY SLAVE::allin1 A1$XFER_OUT
Is this proxy command appropriate in this case? I thought maybe it should be A1$XFER_IN?
Any help gratefully appreciated.
Thanks, Mark.
Not sure, but ADD/PROXY SLAVE::allin1 A1$XFER_OUT/DEF may help.
Bizarrely (and I'm sure Steve Davidson will have something to say about this) the instructions are telling you to set up the proxy the wrong way round.
When I added the proxy on the target system back to the system doing the copying it worked fine.
... onto the next step...
Regards, Mark.
On 04/02/12 17:19, Oleg Safiullin wrote:
UAF> ADD/PROXY SLAVE::allin1 A1$XFER_OUT
Is this proxy command appropriate in this case? I thought maybe it should be A1$XFER_IN?
Any help gratefully appreciated.
Thanks, Mark.
Not sure, but ADD/PROXY SLAVE::allin1 A1$XFER_OUT/DEF may help.
Hi Oleg,
Unfortunately that didn't help. Proxy access is all completely new to me unfortunately!
Mark.
UAF> ADD/PROXY SLAVE::allin1 A1$XFER_OUT
Is this proxy command appropriate in this case? I thought maybe it should be A1$XFER_IN?
Any help gratefully appreciated.
Thanks, Mark.
Not sure, but ADD/PROXY SLAVE::allin1 A1$XFER_OUT/DEF may help.
Hi guys,
Could someone help me with a file transfer issue. I'm trying to get ALLIN1 to transfer all my documents from my VAX to my ALPHA. This happens via a management menu and a submitted batch job, but that job fails.
I've narrowed it down to a copy operation:
$ COPY oa$transfer:[MSW]pat_MSW.dat -
SLAVE"A1$XFER_IN"::oa$loaduser:[000000]pat_MSW.dat
%COPY-E-OPENOUT, error opening SLAVE"A1$XFER_IN"::OA$LOADUSER:[000000]PAT_MSW.DAT; as output
-RMS-E-CRE, ACP file create failed
-SYSTEM-F-INVLOGIN, login information invalid at remote node
The account A1$XFER_IN exists on SLAVE, as does the target directory.
The instructions before transfer include setting up a proxy between the two accounts:
UAF> ADD/PROXY SLAVE::allin1 A1$XFER_OUT
Is this proxy command appropriate in this case? I thought maybe it should be A1$XFER_IN?
Any help gratefully appreciated.
Thanks, Mark.
On 1/24/2012 8:37 PM, Steve Davidson wrote:
Mark,
Look at the file MIM::DU4:[DECNET]LATGROUPS.TXT, then configure your
DECserver to use the LAT groups assigned to your network.
-Steve
HE LIVES! :-D
-brian
Mark,
Look at the file MIM::DU4:[DECNET]LATGROUPS.TXT, then configure your
DECserver to use the LAT groups assigned to your network.
-Steve
-----Original Message-----
From: owner-hecnet at Update.UU.SE
[mailto:owner-hecnet at Update.UU.SE] On Behalf Of Mark Wickens
Sent: Tuesday, January 24, 2012 18:09
To: hecnet at Update.UU.SE
Subject: [HECnet] Access to SLAVE via LAT from local
DECserver - permission denied...
Hi guys,
My node SLAVE is configured for LAT as follows:
Node Name: SLAVE LAT Protocol
Version: 5.3
Node State: On
Node Ident: AlphaServer 1000A 5/300 VMS Alpha V8.3 MSW,
Windermere, UK
Incoming Connections: Enabled Incoming Session
Limit: None
Outgoing Connections: Enabled Outgoing Session
Limit: None
Service Responder: Disabled Announcements:
Enabled
Circuit Timer (msec): 80 Keepalive Timer
(sec): 20
Retransmit Limit (msg): 8 Node Limit
(nodes): None
Multicast Timer (sec): 60 CPU Rating:
0
Maximum Unit Number: 9999 Extra Datalink
Buffers: 9
Queue Limit: 24 Forward Session
Limit: 16
User Groups: 20, 23
Service Groups: 20, 23
Service Classes: 1
Service Name Status Rating Identification
SLAVE Available 81 D AlphaServer 1000A 5/300
VMS Alpha
V8.3 M
SW, Windermere, UK
I have a DECserver 90M connected locally, but I get a
connection refused when I attempt a CONNECT SLAVE.
Is this a permissions issue I need to sort via configuration
on SLAVE, or is this something to do with the DECserver configuration.
Thanks, Mark.
Hi guys,
My node SLAVE is configured for LAT as follows:
Node Name: SLAVE LAT Protocol Version: 5.3
Node State: On
Node Ident: AlphaServer 1000A 5/300 VMS Alpha V8.3 MSW, Windermere, UK
Incoming Connections: Enabled Incoming Session Limit: None
Outgoing Connections: Enabled Outgoing Session Limit: None
Service Responder: Disabled Announcements: Enabled
Circuit Timer (msec): 80 Keepalive Timer (sec): 20
Retransmit Limit (msg): 8 Node Limit (nodes): None
Multicast Timer (sec): 60 CPU Rating: 0
Maximum Unit Number: 9999 Extra Datalink Buffers: 9
Queue Limit: 24 Forward Session Limit: 16
User Groups: 20, 23
Service Groups: 20, 23
Service Classes: 1
Service Name Status Rating Identification
SLAVE Available 81 D AlphaServer 1000A 5/300 VMS Alpha V8.3 M
SW, Windermere, UK
I have a DECserver 90M connected locally, but I get a connection refused when I attempt
a CONNECT SLAVE.
Is this a permissions issue I need to sort via configuration on SLAVE, or is this something
to do with the DECserver configuration.
Thanks, Mark.
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On
Behalf Of Kari Uusimaki
Sent: Tuesday, January 17, 2012 9:13 PM
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] Is Pathworks32 server CTerm part exists?
Pinocchio,
It takes a while for me to find the Pathworks CD's. I have an unsorted
collection of hundreds of DEC software CD's and I have to dig into the
boxes and go through them to pick the right ones.
Please have patience.
When I have the CD's available, I prefer to upload them to my own VMS
machine for your pick up. I'll tell you about the locations when
everything is ready.
Kari
Wonderful!
Waiting impatiently!
Thank you!