I figured that most would figure that out. Also, I'm not sure what the
actual address will be until sometime Friday, so the name was the
easiest to use.
-Steve
-----Original Message-----
From: owner-hecnet at Update.UU.SE
[mailto:owner-hecnet at Update.UU.SE] On Behalf Of Bob Armstrong
Sent: Wednesday, March 21, 2012 15:27
To: hecnet at Update.UU.SE
Subject: RE: [HECnet] Eastern US HECnet hub will be down this Friday
Select port tcp-0-19 and modify the address.
FWIW, you cannot actually enter "bridge.declab.net" into
Multinet - it only accepts a dotted IP address.
Bob
FWIW, you cannot actually enter "bridge.declab.net" into Multinet - it
only accepts a dotted IP address.
Not in mul conf/decnet/connect, but you can in multinet set/decnet
command in MULTINET:DECNET-CIRCUITS.COM. It will stay there
unles you touch the interface again.
--
Regards, Rok
Select port tcp-0-19 and modify the address.
FWIW, you cannot actually enter "bridge.declab.net" into Multinet - it
only accepts a dotted IP address.
Bob
Mark,
$multinet configure/menu
Select DECnet over IP, or something like that. Select port tcp-0-19
and modify the address. Save and exit. This will fix the "permanent"
database, but not the the in-memory copy. You can either fix that
manually, or reboot. It has been a while since I've done the manual
mode, so I would have to look that up myself, but rebooting will check
to see that everything works for startup. This should be done
periodically anyway.
-Steve
-----Original Message-----
From: owner-hecnet at Update.UU.SE
[mailto:owner-hecnet at Update.UU.SE] On Behalf Of Mark Benson
Sent: Wednesday, March 21, 2012 10:11
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] Eastern US HECnet hub will be down this Friday
Can you give me some idea how to check Multinet? I let you
set it up remotely and I don't know what/how to check it >.<
--
Mark Benson
http://markbenson.org/bloghttp://twitter.com/MDBenson
On 21 Mar 2012, at 14:04, "Steve Davidson" <jeep at scshome.net> wrote:
The Eastern US HECnet hub will be down this Friday due to static IP
address reassignment and bandwidth increases. Any systems that
currently connect to IP address 69.21.253.230 should change to
bridge.declab.net. This includes bridge and Multinet Tunnel
connections as well as UUHEC (UUCP port 540) connections.
Regards,
-Steve
I know that part, I meant to check in Multinet to see
where my tunnel was connecting to at Steve's end :)
It's in MULTINET:DECNET-CIRCUITS.COM.
--
Regards, Rok
I know that part, I meant to check in Multinet to see where my tunnel was connecting to at Steve's end :)
--
Mark Benson
http://markbenson.org/bloghttp://twitter.com/MDBenson
On 21 Mar 2012, at 16:20, Rok Vidmar <rok.vidmar at gmail.com> wrote:
Can you give me some idea how to check Multinet? I let you set
it up remotely and I don't know what/how to check it >.<
$ mcr ncp sho kno circ
Known Circuit Volatile Summary as of 21-MAR-2012 17:18:25
Circuit State Loopback Adjacent
Name Routing Node
EWA-0 on
TCP-0-0 on 3.171 (NUK1C)
TCP-0-1 on 3.47 (RVDSXL)
TCP-0-2 on -starting
The other end at TCP-0-2 is down.
--
Regards, Rok
Can you give me some idea how to check Multinet? I let you set
it up remotely and I don't know what/how to check it >.<
$ mcr ncp sho kno circ
Known Circuit Volatile Summary as of 21-MAR-2012 17:18:25
Circuit State Loopback Adjacent
Name Routing Node
EWA-0 on
TCP-0-0 on 3.171 (NUK1C)
TCP-0-1 on 3.47 (RVDSXL)
TCP-0-2 on -starting
The other end at TCP-0-2 is down.
--
Regards, Rok
Can you give me some idea how to check Multinet? I let you set it up remotely and I don't know what/how to check it >.<
--
Mark Benson
http://markbenson.org/bloghttp://twitter.com/MDBenson
On 21 Mar 2012, at 14:04, "Steve Davidson" <jeep at scshome.net> wrote:
The Eastern US HECnet hub will be down this Friday due to static IP
address reassignment and bandwidth increases. Any systems that
currently connect to IP address 69.21.253.230 should change to
bridge.declab.net. This includes bridge and Multinet Tunnel connections
as well as UUHEC (UUCP port 540) connections.
Regards,
-Steve
The Eastern US HECnet hub will be down this Friday due to static IP
address reassignment and bandwidth increases. Any systems that
currently connect to IP address 69.21.253.230 should change to
bridge.declab.net. This includes bridge and Multinet Tunnel connections
as well as UUHEC (UUCP port 540) connections.
Regards,
-Steve
On 3/19/2012 4:15 PM, Dave McGuire wrote:
Brian, I think the best way to approach it is to just try this:
interface Tunnel1
no ip address
decnet cost 10
bridge-group 1
You know, I was thinking about this. I don't think you should need to do the bridge-group if all you want to do is DECnet routing.
Let's try it without. :-D
-brian
