I found an option in the blackberry that just switches off html. I wondered whether that might do the trick. Now what does the PDP-10 make of it..
------Origineel bericht------
Van: Paul_Koning at Dell.com
Afzender: owner-hecnet at Update.UU.SE
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: Re: [HECnet] Psilo status?
Verzonden: 22 juni 2012 15:23
That looks good. My mail reader when asked to show "raw source" shows me Mime headers including the Content-type:text/plain header, but this time it's sent straight, there isn't a transfer-encoding listed.
paul
On Jun 22, 2012, at 1:03 AM, <hvlems at zonnet.nl>
wrote:
Peter is this readable?
Hans
------Origineel bericht------
Van: Peter Lothberg
Afzender: owner-hecnet at Update.UU.SE
Aan: hecnet at Update.UU.SE
Cc: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: Re: [HECnet] Psilo status?
Verzonden: 21 juni 2012 05:08
It is plain ascii, 8 bits and no problem for my own vms
systems. Besides there's no option to modify on my
blackberry. It also enforces topposting to my despair.
Apologies. I"ll drop off the list.
As Johnny points out, it's not critisim of you or your contributions
(well, I can't read them).
My point is that a lot of the HECNet hosts don't speak 8-bit
characters. All the 36bit machines does 5*7bit=35bit to store ASCII.
So it would be nice if I could follow the HECnet mailinglist on my
HECnet machine, that;a all, thanks, Peter.
--Peter
That looks good. My mail reader when asked to show "raw source" shows me Mime headers including the Content-type:text/plain header, but this time it's sent straight, there isn't a transfer-encoding listed.
paul
On Jun 22, 2012, at 1:03 AM, <hvlems at zonnet.nl>
wrote:
Peter is this readable?
Hans
------Origineel bericht------
Van: Peter Lothberg
Afzender: owner-hecnet at Update.UU.SE
Aan: hecnet at Update.UU.SE
Cc: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: Re: [HECnet] Psilo status?
Verzonden: 21 juni 2012 05:08
It is plain ascii, 8 bits and no problem for my own vms
systems. Besides there's no option to modify on my
blackberry. It also enforces topposting to my despair.
Apologies. I"ll drop off the list.
As Johnny points out, it's not critisim of you or your contributions
(well, I can't read them).
My point is that a lot of the HECNet hosts don't speak 8-bit
characters. All the 36bit machines does 5*7bit=35bit to store ASCII.
So it would be nice if I could follow the HECnet mailinglist on my
HECnet machine, that;a all, thanks, Peter.
--Peter
Peter is this readable?
Hans
------Origineel bericht------
Van: Peter Lothberg
Afzender: owner-hecnet at Update.UU.SE
Aan: hecnet at Update.UU.SE
Cc: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: Re: [HECnet] Psilo status?
Verzonden: 21 juni 2012 05:08
It is plain ascii, 8 bits and no problem for my own vms
systems. Besides there's no option to modify on my
blackberry. It also enforces topposting to my despair.
Apologies. I"ll drop off the list.
As Johnny points out, it's not critisim of you or your contributions
(well, I can't read them).
My point is that a lot of the HECNet hosts don't speak 8-bit
characters. All the 36bit machines does 5*7bit=35bit to store ASCII.
So it would be nice if I could follow the HECnet mailinglist on my
HECnet machine, that;a all, thanks, Peter.
--Peter
On Thu, Jun 21, 2012 at 4:23 PM, Pontus <pontus at update.uu.se> wrote:
Hi
This is a shameless plug for something I and the Update Computer Club
have been working on this spring and opened yesterday.
The exhibition "Three Tons of Minicomputers" at Museum Gustavianum in
Uppsala, Sweden.
http://www.gustavianum.uu.se/node13
We have collected computers primarily used by the university at some
point in time. Highlights include a Linc-8 and a DECSYSTEM-2060 with
peripherals.
Here are some pictures from the opening:
http://www.update.uu.se/~jeppe/tmp/vernissage/
I strongly recommend anyone nearby Uppsala this summer to take a swing
by Gustavianum. If you want a guided tour, let me know and we'll figure
something out.
It's only open for a few months, so don't wait to long.
Regards,
Pontus.
Hello!
Pontus I've met Adam (LINC-8) at the VCF earlier this year, that's
where David and I met (officially that is) but not the 2060. What was
both of them being used at the school for?
-----
Gregg C Levine gregg.drwho8 at gmail.com
"This signature fought the Time Wars, time and again."
Hi
This is a shameless plug for something I and the Update Computer Club
have been working on this spring and opened yesterday.
The exhibition "Three Tons of Minicomputers" at Museum Gustavianum in
Uppsala, Sweden.
http://www.gustavianum.uu.se/node13
We have collected computers primarily used by the university at some
point in time. Highlights include a Linc-8 and a DECSYSTEM-2060 with
peripherals.
Here are some pictures from the opening:
http://www.update.uu.se/~jeppe/tmp/vernissage/
I strongly recommend anyone nearby Uppsala this summer to take a swing
by Gustavianum. If you want a guided tour, let me know and we'll figure
something out.
It's only open for a few months, so don't wait to long.
Regards,
Pontus.
On 14 Jun 2012, at 02:34, Boyanich, Alastair wrote:
Hi Mark,
Thanks for the clarification. Not sure why I thought it was ARMv6.
Still, I have an Rpi on order and due sometime in the next several
years. I'd like ideally to replace some systems I have such as the
TheoLinux router to save some power. More ram though :) I still wonder
about heat.
Also this VIA seems to have 2gb onboard flash + the weenySD slot.
This is a full clarification of the ARM architecture version versus ARM model number issue. It is slightly confusing, but here is some Wikipedia goodness to help iron it out a bit:
Simple breakdown:
http://en.wikipedia.org/wiki/ARM_architecture#ARM_cores
More complex and comprehensive breakdown:
http://en.wikipedia.org/wiki/List_of_ARM_microprocessor_cores
Just thought I'd clear that up as it's confused the funk out of me a few times :)
--
Mark Benson
http://DECtec.info
Twitter: @DECtecInfo
HECnet: STAR69::MARK
Online Resource & Mailing List for DEC Enthusiasts.
I have ("somewhere") doccumentation for:
DEQNA
DELQA
DELQA-Plus
^^^^ (Original name by DEC)
I guess the latter is -YM,
The more modern ones can also be found in newer uVAX:en like 3500, but then with S-handles, perfect for a PDP 11-53, but most other chassies would require some mechanical work done to the PCB in order to remove handles...
Give me an E-mail shout if needed,
G ran
On 2012-06-19 16:52, Dave McGuire wrote:
On 06/19/2012 10:27 AM, Johnny Billquist wrote:
Found 1 DELQA and 4 DEQNA (condition unknown), and also have 1 broken
DELQA
I recall that the DELQA is more "modern" and better i some way, are they
also more prone to failure?
No. From a reliability point of view, I've not heard that either should
be better or worse. However, the DEQNA is rather buggy in its general
performance.
Side-by-side, the DELQA is quite a bit faster than the DEQNA, the
DELQA-YA ("Turbo DELQA") even more so.
That said, the DELQA has a "DEQNA compatibility mode"...whether that
makes it as slow and/or buggy as the DEQNA, I don't know.
-Dave
On 20 Jun 2012, at 22:42, H Vlems wrote:
Sampsa, I've been using a BB for 6 or 7 years now. At the time there was
just no alternative. For business use it's still great. If you want more
than that, right, get an iPhone or an Andoid based platform.
Hans
BTW I think thi is my last Blackberry becuase I feel that when this contract
expires RIM will be down the drain. What would you suggest, Apple or Android
platform?
Again, if I'd never used an iPhone before that, then yeah, I would've probably been OK with the BB.
As for me, I use an iPhone (have since 2007) so am biased but very happy with it - in fact I've got an iPad as well and the new iMessage (basically BBM built into the text messaging app) is great - I get the same messages on my Mac, iPad and iPhone, all for free.
Sampsa
That's a bit of a loaded question, actually. :)
It's all going to come down to personal preference so I'd say go get your hands on both to play with.
I've always found the iPhone to have a bit more of a polished UI but I haven't had any real hands on with android in years so that could no longer be true.
-brian
On Jun 20, 2012, at 15:42, "H Vlems" <hvlems at zonnet.nl> wrote:
Sampsa, I've been using a BB for 6 or 7 years now. At the time there was
just no alternative. For business use it's still great. If you want more
than that, right, get an iPhone or an Andoid based platform.
Hans
BTW I think thi is my last Blackberry becuase I feel that when this contract
expires RIM will be down the drain. What would you suggest, Apple or Android
platform?
-----Oorspronkelijk bericht-----
Van: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] Namens
Sampsa Laine
Verzonden: woensdag, juni 2012 21:33
Aan: hecnet at Update.UU.SE
Onderwerp: Re: [HECnet] Psilo status?
On 20 Jun 2012, at 22:27, Dennis Boone wrote:
Hans' blackberry may be set to latin1, given he's in .nl.
On a related note, I got a blackberry for about a month since all my "cool
kid" buddies were bugging me to get on BBM. Threw it under a bus after a
month, those things SUCK.
Sampsa
Sampsa, I've been using a BB for 6 or 7 years now. At the time there was
just no alternative. For business use it's still great. If you want more
than that, right, get an iPhone or an Andoid based platform.
Hans
BTW I think thi is my last Blackberry becuase I feel that when this contract
expires RIM will be down the drain. What would you suggest, Apple or Android
platform?
-----Oorspronkelijk bericht-----
Van: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] Namens
Sampsa Laine
Verzonden: woensdag, juni 2012 21:33
Aan: hecnet at Update.UU.SE
Onderwerp: Re: [HECnet] Psilo status?
On 20 Jun 2012, at 22:27, Dennis Boone wrote:
Hans' blackberry may be set to latin1, given he's in .nl.
On a related note, I got a blackberry for about a month since all my "cool
kid" buddies were bugging me to get on BBM. Threw it under a bus after a
month, those things SUCK.
Sampsa
