HECnet

hecnet@lists.dfupdate.se

1 participants
15560 discussions

Managed to get an emulated S/390 with MVS up - any way we can get this beast onto HECnet?

by jg＠jordi.guillaumes.name

El 04/08/2012, a les 19:07, Sampsa Laine <sampsa at mac.com> va escriure: On 4 Aug 2012, at 20:04, Jordi Guillaumes i Pons wrote: Of course, there are... hrrr... alternatives to MVS3.8J. But they are not legal to run in Hercules. Technically, you can fire up a modern z/OS system, with full TCP/IP support on Hercules. But don't tell IBM about that ;) Got a copy? I'll keep shtum..:) Yup, but its something like 6-7 GB IIRC :) Just search in the usual, shaddy places for "IBM ADCD" Note, ADCD, not like the austalian rock band! You'll need to download a bunch of virtual 3390 drives and you'll get a working z/OS 1.10 system, with all the toys you need (DB2, IMS, CICS, PLI and COBOL compilers, tools...) ;) Jordi Guillaumes i Pons jg at jordi.guillaumes.name HECnet: BITXOV::JGUILLAUMES

12 years, 10 months

Managed to get an emulated S/390 with MVS up - any way we can get this beast onto HECnet?

by jg＠jordi.guillaumes.name

El 04/08/2012, a les 12:38, Sampsa Laine <sampsa at mac.com> va escriure: For various reasons to do with my general mental stability etc, I decided to learn about IBM mainframes, so got one running.. I used to be a MVS systems programmer :) Unfortunately, my specialisation was not networking/communications, but perhaps I can help a little bit... Any way to connect this to DECnet? Maybe over over DECNet-OSI since the thing natively does VTAM? Are you using the "public domain" MVS3.8J available in the net? That's quite old. No TCP/IP support. Just plain old SNA/VTAM. At those days you needed special hardware to talk to IBM machines. They just didn't speak ethernet. I don't think even if you had a working 3745 you could attach it to an Hercules emulator. So I'm afraid there is no joy. You _could_ be able to use part of DECNET/SNA to do open a 3270 session from your VAX, if it can be directed to use a telnet port. Hercules exposes its virtual 3270 controllers thru telnet, so that could be a possibility. Of course, there are... hrrr... alternatives to MVS3.8J. But they are not legal to run in Hercules. Technically, you can fire up a modern z/OS system, with full TCP/IP support on Hercules. But don't tell IBM about that ;) Details: http://sampsa.com/2012/08/04/mvs-on-an-s390-because-openvms-is-just-too-eas… That distribution comes without the butter and bread of MVS. You get just native TSO (yuck!) and a replacement for the "real thing" (that is, ISPF/PDF) called RPF. If you go thru the books you'll be lost, since they talk about the IBM tools which come with ISPF. Specifically, the editor. RPF comes close to it, but it is different enough so the TSO/ISPF books won't help you. The best way to edit/manage files in that 3.8J emulated system would be using the card reader / card punch emulation to put in and get out files. As for "datasets", here comes a crash course: - MVS does not have a "proper" filesystem. Each disk ("volume", in IBM-esse) has its own table of contents (VTOC), which contains the files resident at that volume. The files in a disk or tape are called "data sets". When you open a dataset from a program, then it is a "file". The "files" and "data sets" are related using JCL thru "DDNAMES" or "Data Set Names". Think about them as some kind of logical names. - Each "dataset" has a name which can be up to 43 characters long. The names are formed attaching parts of up to 8 characters long, separated by dots. The characters can be any alphanumeric byte (excepting for the first one in each 8-byte part, which has to be an alphabetic character). All of this in EBCDIC, of course. Exammples: SYS1.PROCLIB MYFILES.SOURCES.COBOL MYFILES.LOAD THIS.IS.AN.ABSURDEL.Y.LONG.NAME And so on... - There is an indexed file (actually, a set of logically linked VSAM KSDS files) which _could_ contain all the datasets known to the system, correlated to the volumes where they reside (including tapes), called CATALOG. In more modern versions of MVS the system programmer (system manager) can enforce that every permanent file MUST be referenced in that catalog. - There is a special kind of data set, named "PDS", or "Partitioned Data Set". That dataset can have "members" inside, and has a directory to list its members. The member name goes after the dataset name inside parenthesis: MYFILES.SOURCES.ASM(MYPROG) This is the way source and load (executable files) are usually managed in the mainframe environment. You use the ISPF utilities to allocate and create the library (as PDS are also known) and then use the editor to create/modify the members. The ISPF panels (screens) to edit, compile, linkedit and run programs are prepared to manage libraries and allow you to browse the library directory using the usual wildcards. Of course, you probably already know all this stuff :) Anyway, if you need help, email me and I'll try to assist you. Jordi Guillaumes i Pons jg at jordi.guillaumes.name HECnet: BITXOV::JGUILLAUMES PS: I have lost connectivity to UPDATE again. And this time rebooting my router didn't fix it... Any other one in the same situation?

12 years, 10 months

Managed to get an emulated S/390 with MVS up - any way we can get this beast onto HECnet?

by gregg.drwho8＠gmail.com

On Sat, Aug 4, 2012 at 6:38 AM, Sampsa Laine <sampsa at mac.com> wrote: For various reasons to do with my general mental stability etc, I decided to learn about IBM mainframes, so got one running.. Any way to connect this to DECnet? Maybe over over DECNet-OSI since the thing natively does VTAM? Details: http://sampsa.com/2012/08/04/mvs-on-an-s390-because-openvms-is-just-too-eas… Hello! Sampsa nice going so far back there on that list. Next step will be joining the H390-MVS list to further your studies and to ask the right questions. I run that one so you're in good company. There's also a very unhappy crowd of yetis around you by the way, they lost a bet..... ----- Gregg C Levine gregg.drwho8 at gmail.com "This signature fought the Time Wars, time and again."

12 years, 10 months

MVS and DecNet

by hvlems＠zonnet.nl

DEC had two hardware solutions. The channel attached gateway and a gateway that used a serial interface. The -CT was the size of a VAX 4500, the -ST the size of a LANbridge 100 (to give you an idea). The advantage of the -CT over the -ST was the simultaneous sessions it supported, 1024 vs 256. Important if one used RJE stations because each RJE station used at least one cardreader, console and printer session. I thinks the cardpunch was optional but if you needed more output streams it was useful. The -CT connected to ethernet and connected to just one IBM host via its channel interface. All systems that supported the SNA/DECnet package could set up sessions to the -CT and thus the IBM. The -ST was kind of point to point: serial to the IBM and synchronous to the VAX host. (IIRC ..) The IBM used SNA on either DOS/VSE or MVS. The latter also supported access to its filesystem, so $ DIR IBM::*.* was possible. An additional SNA gateway software product was required. The 3174 emulation was for terminals, it was implemented with yet another box. I forgot which one. It connected to a control unit and the serial backend was hard wired to two DECservers 200 that offered the (reverse) LAT service IBM to the ethernet. Worked a lot better than 3174 emulation on token ring connected Novell pc's. (All this happened between 1988 and 1994). In those days DECnet was the lingua franca on the LAN. Phase 4. No way phase 5 could talk directly to VTAM. The hardware gateway products only implemented phase 4. There was an SNA product that ran natively on a VMS system, it used a DMF32 to connect to the IBM (at least my memory thinks it was a DMF32. May just as well have been something else :-) . Same functionality as the -ST without the DEMSA box. Hans ------Origineel bericht------ Van: Sterling Garwood Afzender: owner-hecnet at Update.UU.SE Aan: Sampsa Laine Cc: hecnet at Update.UU.SE Beantwoorden: hecnet at Update.UU.SE Onderwerp: [HECnet] MVS and DecNet Verzonden: 4 augustus 2012 16:35 Saw your note on Hecnet about MVS and DecNet I've run MVS 3.8J on Hercules for years on Macs and PCs (usually on Linux) ISTR that DEC had an interface that sat on the IBM channel and looked like a 3274 control unit --- I also remember going to a demo at DEC late in their life and watching the product crash over and over :-) The place I worked ended up installing TCPIP on the 370s to talk to the Vaxen - I believe it was a port of the Stanford or UCLA code (don't remember which). Anyone who needed terminal access to the mainframe went thru the Vax that was the gateway. Sterling Garwood slgarwood at charter.net

12 years, 10 months

MVS and DecNet

by slgarwood＠charter.net

Saw your note on Hecnet about MVS and DecNet I've run MVS 3.8J on Hercules for years on Macs and PCs (usually on Linux) ISTR that DEC had an interface that sat on the IBM channel and looked like a 3274 control unit --- I also remember going to a demo at DEC late in their life and watching the product crash over and over :-) The place I worked ended up installing TCPIP on the 370s to talk to the Vaxen - I believe it was a port of the Stanford or UCLA code (don't remember which). Anyone who needed terminal access to the mainframe went thru the Vax that was the gateway. Sterling Garwood slgarwood at charter.net

12 years, 10 months

Managed to get an emulated S/390 with MVS up - any way we can get this beast onto HECnet?

by sampsa＠mac.com

Yeah, I think it's VTAM. Not sure what / how to connect it beyond the local box though, might need some IBM network voodoo box or something. Sampsa On 4 Aug 2012, at 16:29, Bob Armstrong wrote: Any way to connect this to DECnet? Maybe over over DECNet-OSI since the thing natively does VTAM? I don't know about DECnet, but the reverse is possible - DEC had an SNA gateway product. Good luck :-) Bob

12 years, 10 months

Managed to get an emulated S/390 with MVS up - any way we can get this beast onto HECnet?

by bob＠jfcl.com

Any way to connect this to DECnet? Maybe over over DECNet-OSI since the thing natively does VTAM? I don't know about DECnet, but the reverse is possible - DEC had an SNA gateway product. Good luck :-) Bob

12 years, 10 months

Managed to get an emulated S/390 with MVS up - any way we can get this beast onto HECnet?

by fcoffey＠misernet.net

On Sat, 4 Aug 2012, Sampsa Laine wrote: For various reasons to do with my general mental stability etc, I decided to learn about IBM mainframes, so got one running.. Hi Sampsa, Are you running Turnkey? I have VM/370 (well, 380 actually) and MVS/380 running here. I play with it occasionally. I also run MUSIC/SP on a Windows XP VM I have (cause it's the only way I can get TCP/IP working with MUSIC since it's not supported from what I can tell on Hercules). I'd like to get them interfaced to mail (I remember using PROFS (which I know is licensed) at a former job) or actually do *something* remotely useful with it ... :) Let me know if you make any headway. Fred

12 years, 10 months

Managed to get an emulated S/390 with MVS up - any way we can get this beast onto HECnet?

by sampsa＠mac.com

I don't think the freeware MVS comes with SNA, as that's a commercial product. Could set up some captive accounts to run TN3270 on GORVAX I suppose. Sampsa On 4 Aug 2012, at 15:53, Kari Uusim ki wrote: How about the SNA gateway, which DEC built just for that need? On 4.8.2012 13:38, Sampsa Laine wrote: For various reasons to do with my general mental stability etc, I decided to learn about IBM mainframes, so got one running.. Any way to connect this to DECnet? Maybe over over DECNet-OSI since the thing natively does VTAM? Details: http://sampsa.com/2012/08/04/mvs-on-an-s390-because-openvms-is-just-too-eas… .

12 years, 10 months

Managed to get an emulated S/390 with MVS up - any way we can get this beast onto HECnet?

by uusimaki＠exdecfinland.org

How about the SNA gateway, which DEC built just for that need? On 4.8.2012 13:38, Sampsa Laine wrote: For various reasons to do with my general mental stability etc, I decided to learn about IBM mainframes, so got one running.. Any way to connect this to DECnet? Maybe over over DECNet-OSI since the thing natively does VTAM? Details: http://sampsa.com/2012/08/04/mvs-on-an-s390-because-openvms-is-just-too-eas… .

12 years, 10 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

HECnet