On 2012-09-21 19:35, Jordi Guillaumes i Pons wrote:
Please add this machine to the nodelist:
7.72 BITXOM (SIMH PDP11, RSX11M 4.8)
Done.
And, by the way, I don't have the node name for 5.99, neither it is in MIM::
I know. I've tried poking Rob about that, but don't have a name for it...
The number of areas and machines online is looking pretty impressive nowadays, though. Nice!
Johnny
On 21/09/12 04:51, Kari Uusim ki wrote:
On 21.9.2012 2:56, Mark Wickens wrote:
Hi guys,
Does anyone have the DEC RDB Version 6.1 developers kit. I have the
December 1995 ConDist which *should* have it on, but for some
inexplicable reason the .C saveset is missing from the CDROM (.A, .B, .D
etc...)
Regards, Mark
.
Which one do you need; VAX or Alpha?
I'll check what I can find.
Regards,
Kari
VAX please.
Yes, I tried to install it - it fails loading saveset C.
I have installed 5.1 without issue.
Regards, Mark.
Have you tried to install it?
Hans
------Origineel bericht------
Van: Mark Wickens
Afzender: owner-hecnet at Update.UU.SE
Aan: hecnet at update.uu.se
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: [HECnet] DEC RDB 6.1 Kit
Verzonden: 21 september 2012 01:56
Hi guys,
Does anyone have the DEC RDB Version 6.1 developers kit. I have the
December 1995 ConDist which *should* have it on, but for some inexplicable
reason the .C saveset is missing from the CDROM (.A, .B, .D etc...)
Regards, Mark
On 21.9.2012 2:56, Mark Wickens wrote:
Hi guys,
Does anyone have the DEC RDB Version 6.1 developers kit. I have the
December 1995 ConDist which *should* have it on, but for some
inexplicable reason the .C saveset is missing from the CDROM (.A, .B, .D
etc...)
Regards, Mark
.
Which one do you need; VAX or Alpha?
I'll check what I can find.
Regards,
Kari
Hi guys,
Does anyone have the DEC RDB Version 6.1 developers kit. I have the December 1995 ConDist which *should* have it on, but for some inexplicable reason the .C saveset is missing from the CDROM (.A, .B, .D etc...)
Regards, Mark
It looks like this didn't go out the first time, perhaps because I sent it from the wrong place...
---------
Since people are offering to send old hardware to a good home, I figure I should do likewise.
I have some bits of old DEC hardware, free to a good home.
a. two M9202 Unibus jumpers (the ones with a foot or three of Unibus cable between the boards).
b. DEFPA-DA -- PCI FDDI NIC, dual attachment style (two fiber optic ports).
paul
That got it!
Thanks Rob.
Mark.
On Thu, 20 Sep 2012, Rob Jarratt wrote:
Is it not that you have not set up your routing node as an *area* routing
node. Try DEF EXEC TYPE AREA and restart DECnet.
Regards
Rob
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE]
On Behalf Of hvlems at zonnet.nl
Sent: 20 September 2012 19:16
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] decnet known area/nodes from SIMH instance
Try $ show network/old
That will tell you whether you've got a router or an endnode.
Based on what you posted so far you have the former.
Hans
-----Original Message-----
From: Mark Wickens <mark at wickensonline.co.uk>
Sender: owner-hecnet at Update.UU.SE
Date: Thu, 20 Sep 2012 14:47:26
To: hecnet at Update.UU.SE<hecnet at update.uu.se>
Reply-To: hecnet at Update.UU.SESubject: Re: [HECnet] decnet known
area/nodes from SIMH instance
Dan,
Thanks for the help.
Unfortunately it didn't make any difference.
License Management Facility V1.2
License Database File: SYS$COMMON:[SYSEXE]LMF$LICENSE.LDB;1
Created on: 16-SEP-2012
Created by user: SYSTEM
Created by LMF Version: V1.2
-----------------------------------
DVNETRTG DEC
$ show network
Product: DECNET Node: SIMVAX Address(es): 4.248
Product: TCP/IP Node: simvax.hecnet.eu Address(es):
192.168.1.127
NCP>show known areas
Known Area Volatile Summary as of 20-SEP-2012 14:46:17
Area State Circuit Next node to area
4 unreachable
NCP>show exec characteristics
Node Volatile Characteristics as of 20-SEP-2012 14:45:58
Executor node = 4.248 (SIMVAX)
Identification = DECnet for OpenVMS VAX V7.3
Management version = V4.0.0
Incoming timer = 45
Outgoing timer = 60
Incoming Proxy = Enabled
Outgoing Proxy = Enabled
NSP version = V4.1.0
Maximum links = 32
Delay factor = 80
Delay weight = 5
Inactivity timer = 60
Retransmit factor = 10
Routing version = V2.0.0
Type = routing IV
Routing timer = 600
Broadcast routing timer = 180
Maximum address = 1023
Maximum circuits = 16
Maximum cost = 1022
Maximum hops = 30
Maximum visits = 63
Maximum area = 63
Max broadcast nonrouters = 64
Max broadcast routers = 32
Maximum path splits = 1
Area maximum cost = 1022
Area maximum hops = 30
Maximum buffers = 100
Buffer size = 576
Nonprivileged user id = DECNET
Nonprivileged password = AUMIAWOSAJ
Default access = incoming and outgoing
Pipeline quota = 4032
Alias maximum links = 32
Path split policy = Normal
Maximum Declared Objects = 31
On Thu, 20 Sep 2012, Dan Williams wrote:
Hi,
You need :
ncp>def exec type routing iv
ncp>set exec state off
$@startnet
Also have you got dvnetrtg license loaded ?
That's what I normally forget.
Thanks
Dan
On 20 Sep 2012, at 12:05, Mark Wickens <mark at wickensonline.co.uk>
wrote:
Bit of a puzzler here, but it'll probably turn out to be my
configuration.
When the SIMH VAX/VMS 7.3 instance SIMVAX is serving hecnet.eu I get
the following area/node stats reported:
Known Area Volatile Summary as of 20-SEP-2012 11:53:22
Area State Circuit Next node to area
4 reachable QNA-0 0 (SIMVAX)
Known Node Volatile Summary as of 20-SEP-2012 11:53:37 Executor node
= 4.248 (SIMVAX)
State = on
Identification = DECnet for OpenVMS VAX V7.3
Node State Active Delay Circuit Next node
Links
1.1 (MAGICA) QNA-0 0
1.2 (ERNIE) QNA-0 0
1.3 (FNATTE) QNA-0 0
1.4 (GOBLIN) QNA-0 0
1.5 (ZEKE) QNA-0 0
1.6 (GNOME) QNA-0 0
1.7 (BJARNE) QNA-0 0
1.8 (KRILLE) QNA-0 0
...
So only my area known, and weird stats for nodes. Can anyone tell me
what is up with my configuration?
I'm running Johnny's bridge and if I bring up SLAVE, the AlphaServer
1000A, on the same area it reports all stats correctly. SIMVAX is
currently
unable to see MIM. I set it up as a non-routing node. When I tried setting
it
up via NETCONFIG as a routing node I get everything unreachable.
Regards, Mark.
--
http://www.wickensonline.co.ukhttp://declegacy.org.uk
Is it not that you have not set up your routing node as an *area* routing
node. Try DEF EXEC TYPE AREA and restart DECnet.
Regards
Rob
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE]
On Behalf Of hvlems at zonnet.nl
Sent: 20 September 2012 19:16
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] decnet known area/nodes from SIMH instance
Try $ show network/old
That will tell you whether you've got a router or an endnode.
Based on what you posted so far you have the former.
Hans
-----Original Message-----
From: Mark Wickens <mark at wickensonline.co.uk>
Sender: owner-hecnet at Update.UU.SE
Date: Thu, 20 Sep 2012 14:47:26
To: hecnet at Update.UU.SE<hecnet at update.uu.se>
Reply-To: hecnet at Update.UU.SESubject: Re: [HECnet] decnet known
area/nodes from SIMH instance
Dan,
Thanks for the help.
Unfortunately it didn't make any difference.
License Management Facility V1.2
License Database File: SYS$COMMON:[SYSEXE]LMF$LICENSE.LDB;1
Created on: 16-SEP-2012
Created by user: SYSTEM
Created by LMF Version: V1.2
-----------------------------------
DVNETRTG DEC
$ show network
Product: DECNET Node: SIMVAX Address(es): 4.248
Product: TCP/IP Node: simvax.hecnet.eu Address(es):
192.168.1.127
NCP>show known areas
Known Area Volatile Summary as of 20-SEP-2012 14:46:17
Area State Circuit Next node to area
4 unreachable
NCP>show exec characteristics
Node Volatile Characteristics as of 20-SEP-2012 14:45:58
Executor node = 4.248 (SIMVAX)
Identification = DECnet for OpenVMS VAX V7.3
Management version = V4.0.0
Incoming timer = 45
Outgoing timer = 60
Incoming Proxy = Enabled
Outgoing Proxy = Enabled
NSP version = V4.1.0
Maximum links = 32
Delay factor = 80
Delay weight = 5
Inactivity timer = 60
Retransmit factor = 10
Routing version = V2.0.0
Type = routing IV
Routing timer = 600
Broadcast routing timer = 180
Maximum address = 1023
Maximum circuits = 16
Maximum cost = 1022
Maximum hops = 30
Maximum visits = 63
Maximum area = 63
Max broadcast nonrouters = 64
Max broadcast routers = 32
Maximum path splits = 1
Area maximum cost = 1022
Area maximum hops = 30
Maximum buffers = 100
Buffer size = 576
Nonprivileged user id = DECNET
Nonprivileged password = AUMIAWOSAJ
Default access = incoming and outgoing
Pipeline quota = 4032
Alias maximum links = 32
Path split policy = Normal
Maximum Declared Objects = 31
On Thu, 20 Sep 2012, Dan Williams wrote:
Hi,
You need :
ncp>def exec type routing iv
ncp>set exec state off
$@startnet
Also have you got dvnetrtg license loaded ?
That's what I normally forget.
Thanks
Dan
On 20 Sep 2012, at 12:05, Mark Wickens <mark at wickensonline.co.uk>
wrote:
Bit of a puzzler here, but it'll probably turn out to be my
configuration.
When the SIMH VAX/VMS 7.3 instance SIMVAX is serving hecnet.eu I get
the following area/node stats reported:
Known Area Volatile Summary as of 20-SEP-2012 11:53:22
Area State Circuit Next node to area
4 reachable QNA-0 0 (SIMVAX)
Known Node Volatile Summary as of 20-SEP-2012 11:53:37 Executor node
= 4.248 (SIMVAX)
State = on
Identification = DECnet for OpenVMS VAX V7.3
Node State Active Delay Circuit Next node
Links
1.1 (MAGICA) QNA-0 0
1.2 (ERNIE) QNA-0 0
1.3 (FNATTE) QNA-0 0
1.4 (GOBLIN) QNA-0 0
1.5 (ZEKE) QNA-0 0
1.6 (GNOME) QNA-0 0
1.7 (BJARNE) QNA-0 0
1.8 (KRILLE) QNA-0 0
...
So only my area known, and weird stats for nodes. Can anyone tell me
what is up with my configuration?
I'm running Johnny's bridge and if I bring up SLAVE, the AlphaServer
1000A, on the same area it reports all stats correctly. SIMVAX is
currently
unable to see MIM. I set it up as a non-routing node. When I tried setting
it
up via NETCONFIG as a routing node I get everything unreachable.
Regards, Mark.
--
http://www.wickensonline.co.ukhttp://declegacy.org.uk
Try $ show network/old
That will tell you whether you've got a router or an endnode.
Based on what you posted so far you have the former.
Hans
-----Original Message-----
From: Mark Wickens <mark at wickensonline.co.uk>
Sender: owner-hecnet at Update.UU.SE
Date: Thu, 20 Sep 2012 14:47:26
To: hecnet at Update.UU.SE<hecnet at update.uu.se>
Reply-To: hecnet at Update.UU.SESubject: Re: [HECnet] decnet known area/nodes from SIMH instance
Dan,
Thanks for the help.
Unfortunately it didn't make any difference.
License Management Facility V1.2
License Database File: SYS$COMMON:[SYSEXE]LMF$LICENSE.LDB;1
Created on: 16-SEP-2012
Created by user: SYSTEM
Created by LMF Version: V1.2
-----------------------------------
DVNETRTG DEC
$ show network
Product: DECNET Node: SIMVAX Address(es): 4.248
Product: TCP/IP Node: simvax.hecnet.eu Address(es):
192.168.1.127
NCP>show known areas
Known Area Volatile Summary as of 20-SEP-2012 14:46:17
Area State Circuit Next node to area
4 unreachable
NCP>show exec characteristics
Node Volatile Characteristics as of 20-SEP-2012 14:45:58
Executor node = 4.248 (SIMVAX)
Identification = DECnet for OpenVMS VAX V7.3
Management version = V4.0.0
Incoming timer = 45
Outgoing timer = 60
Incoming Proxy = Enabled
Outgoing Proxy = Enabled
NSP version = V4.1.0
Maximum links = 32
Delay factor = 80
Delay weight = 5
Inactivity timer = 60
Retransmit factor = 10
Routing version = V2.0.0
Type = routing IV
Routing timer = 600
Broadcast routing timer = 180
Maximum address = 1023
Maximum circuits = 16
Maximum cost = 1022
Maximum hops = 30
Maximum visits = 63
Maximum area = 63
Max broadcast nonrouters = 64
Max broadcast routers = 32
Maximum path splits = 1
Area maximum cost = 1022
Area maximum hops = 30
Maximum buffers = 100
Buffer size = 576
Nonprivileged user id = DECNET
Nonprivileged password = AUMIAWOSAJ
Default access = incoming and outgoing
Pipeline quota = 4032
Alias maximum links = 32
Path split policy = Normal
Maximum Declared Objects = 31
On Thu, 20 Sep 2012, Dan Williams wrote:
Hi,
You need :
ncp>def exec type routing iv
ncp>set exec state off
$@startnet
Also have you got dvnetrtg license loaded ?
That's what I normally forget.
Thanks
Dan
On 20 Sep 2012, at 12:05, Mark Wickens <mark at wickensonline.co.uk> wrote:
Bit of a puzzler here, but it'll probably turn out to be my configuration.
When the SIMH VAX/VMS 7.3 instance SIMVAX is serving hecnet.eu I get the following area/node stats reported:
Known Area Volatile Summary as of 20-SEP-2012 11:53:22
Area State Circuit Next node to area
4 reachable QNA-0 0 (SIMVAX)
Known Node Volatile Summary as of 20-SEP-2012 11:53:37
Executor node = 4.248 (SIMVAX)
State = on
Identification = DECnet for OpenVMS VAX V7.3
Node State Active Delay Circuit Next node
Links
1.1 (MAGICA) QNA-0 0
1.2 (ERNIE) QNA-0 0
1.3 (FNATTE) QNA-0 0
1.4 (GOBLIN) QNA-0 0
1.5 (ZEKE) QNA-0 0
1.6 (GNOME) QNA-0 0
1.7 (BJARNE) QNA-0 0
1.8 (KRILLE) QNA-0 0
...
So only my area known, and weird stats for nodes. Can anyone tell me what is up with my configuration?
I'm running Johnny's bridge and if I bring up SLAVE, the AlphaServer 1000A, on the same area it reports all stats correctly. SIMVAX is currently unable to see MIM. I set it up as a non-routing node. When I tried setting it up via NETCONFIG as a routing
node I get everything unreachable.
Regards, Mark.
--
http://www.wickensonline.co.ukhttp://declegacy.org.uk
