HECnet

hecnet@lists.dfupdate.se

15586 discussions

rebuild RSTS/E monitor, was Re: [HECnet] RSTS/E 10.1 and OpenVMS via DECnet

by mcguire＠neurotica.com

On 10/28/2012 03:15 PM, Cory Smelosky wrote: Also if you figure out how to rebuild the monitor let me know. Rebuilding the monitor is easy: $ run sysgen$:sysgen [answer lots of questions here] $ assign/system sy:[0,12] sysgen$$ $ assign/system sy:[0,1] system$$ $ @sysgen (or "$ submit sysgen") Either this doesn't apply to 10.1, or I've broken RSTS/E ;) $ run sysgen$:sysgen run sysgen$:sysgen ^ ?File does not exist $ @sysgen @sysgen ^ ?File does not exist (yes, I assigned the logicals to) You've broken RSTS/E. ;) This works under 10.1. Can you do a fresh install from tape and try it from there? (you're doing this under emulation, right?) -Dave -- Dave McGuire, AK4HZ New Kensington, PA

13 years, 1 month

rebuild RSTS/E monitor, was Re: [HECnet] RSTS/E 10.1 and OpenVMS via DECnet

by b4＠gewt.net

On Oct 28, 2012, at 2:56 PM, Dave McGuire <mcguire at neurotica.com> wrote: On 10/28/2012 12:03 PM, Cory Smelosky wrote: Also if you figure out how to rebuild the monitor let me know. Rebuilding the monitor is easy: $ run sysgen$:sysgen [answer lots of questions here] $ assign/system sy:[0,12] sysgen$$ $ assign/system sy:[0,1] system$$ $ @sysgen (or "$ submit sysgen") Either this doesn't apply to 10.1, or I've broken RSTS/E ;) $ run sysgen$:sysgen run sysgen$:sysgen ^ ?File does not exist $ @sysgen @sysgen ^ ?File does not exist (yes, I assigned the logicals to) -Dave -- Dave McGuire, AK4HZ New Kensington, PA

13 years, 1 month

rebuild RSTS/E monitor, was Re: [HECnet] RSTS/E 10.1 and OpenVMS via DECnet

by mcguire＠neurotica.com

On 10/28/2012 12:03 PM, Cory Smelosky wrote: Also if you figure out how to rebuild the monitor let me know. Rebuilding the monitor is easy: $ run sysgen$:sysgen [answer lots of questions here] $ assign/system sy:[0,12] sysgen$$ $ assign/system sy:[0,1] system$$ $ @sysgen (or "$ submit sysgen") -Dave -- Dave McGuire, AK4HZ New Kensington, PA

13 years, 1 month

RSTS/E 10.1 and OpenVMS via DECnet

by jg＠jordi.guillaumes.name

El 28/10/2012, a les 18:18, Cory Smelosky <b4 at gewt.net> va escriure: DECmail is also installed but not configured. And I may've just figured out why DECnet wasn't working, I'm going to go read the documentation and post back. Okay, I've maybe made progress. Alpha connecting to the RSTS/E system: $ set host 33.301 %SYSTEM-F-NOSUCHOBJ, network object is unknown at remote node And on 33.301: Event type 34.1, Object spawn failure Occurred 15-Oct-25 13:11:52.6 on node 33.301 (GEWT1) Reason: Unknown Object identification Source node = 33.302 Source process = 0 556 0 SYSTEM Destination process = 42 (I have no idea what's with the 15-OCT-25, the date is set correctly on the system ) Attempting to reach 33.302 from 33.301: $ set host 33.302 Connection Established to VAX/VMS Node 33.302 ?Unsupported Virtual Terminal Protocol. And it just times out when the VAX tries to contact the RSTS/E system/RSTS/E system tries to contact the VAX. VAX and ALPHA can reach each other and the Alpha can reach HECnet via the VAX Any ideas? RSTS does not support the CTERM protocol. It needs the old RTERM. I'm not sure if VMS Alpha supports it. VMS VAX 7.3 does: $ set host/app=rterm bitxot %REM-I-CONNECTION, connection made using RTERM protocol %REM-I-REMOTE, connection established to remote node BITXOT:: RSTS V10.1-L 28-Oct-12 19:37 User: 200,1 Password: Last interactive login on 28-Oct-12, 19:36 at KB37: Last non-interactive login on 06-Jun-12, 00:59 Jordi Guillaumes i Pons jg at jordi.guillaumes.name HECnet: BITXOV::JGUILLAUMES

13 years, 1 month

RSTS/E 10.1 and OpenVMS via DECnet

by b4＠gewt.net

On Oct 28, 2012, at 12:03 PM, Cory Smelosky <b4 at gewt.net> wrote: On Oct 28, 2012, at 9:48 AM, Sampsa Laine <sampsa at mac.com> wrote: On 27 Oct 2012, at 21:19, Cory Smelosky wrote: On Oct 27, 2012, at 2:06 PM, Dave McGuire <mcguire at neurotica.com> wrote: On 10/27/2012 03:57 AM, Sampsa Laine wrote: That reminds me, if someone has a turnkey RSX or RSTS box around (that I could just plug in to SIMH and play with), ideally with DECNET support, please let me know. If you can't find one, I can make a RSTS image up for you. (I've never done DECnet under RSX, so that'd take me awhile to figure out) Which version of RSTS? I can give my disk image for my install of 10.1 if anyone wants to try and figure out what I did wrong or wants to make it in to a turnkey install it's pretty basic as i'm new to RSTS. (it has DECmail though) I'm cool with RSTS - whatever version is fine. Try http://gewt.net/rsts.7z It's RSTS/E v10.1 (so DCL OOTB), DECnet is installed but misconfigured, if you figure it out let me know. Also if you figure out how to rebuild the monitor let me know. A config is included in the archive that you'll want to modify a bit. I know the disk image says "v92" but trust me, it's 10.1. Password for 1,2 is "epicfail" (don't ask) It seems to not want to boot in simh git, but works in 3.8 and 3.9. (git may've been updated since I last tried, I should rebuild with debugging symbols and try and find the bug if it wasn't just me messing up). DECmail is also installed but not configured. And I may've just figured out why DECnet wasn't working, I'm going to go read the documentation and post back. Okay, I've maybe made progress. Alpha connecting to the RSTS/E system: $ set host 33.301 %SYSTEM-F-NOSUCHOBJ, network object is unknown at remote node And on 33.301: Event type 34.1, Object spawn failure Occurred 15-Oct-25 13:11:52.6 on node 33.301 (GEWT1) Reason: Unknown Object identification Source node = 33.302 Source process = 0 556 0 SYSTEM Destination process = 42 (I have no idea what's with the 15-OCT-25, the date is set correctly on the system ) Attempting to reach 33.302 from 33.301: $ set host 33.302 Connection Established to VAX/VMS Node 33.302 ?Unsupported Virtual Terminal Protocol. And it just times out when the VAX tries to contact the RSTS/E system/RSTS/E system tries to contact the VAX. VAX and ALPHA can reach each other and the Alpha can reach HECnet via the VAX Any ideas? If I've made a terrible example for a turnkey install tell me so I can try again. Sampsa PS: I will plague people with noob questions.. If you get good answers, let me know.

13 years, 1 month

RSTS/E 10.1 and OpenVMS via DECnet

by b4＠gewt.net

On Oct 28, 2012, at 9:48 AM, Sampsa Laine <sampsa at mac.com> wrote: On 27 Oct 2012, at 21:19, Cory Smelosky wrote: On Oct 27, 2012, at 2:06 PM, Dave McGuire <mcguire at neurotica.com> wrote: On 10/27/2012 03:57 AM, Sampsa Laine wrote: That reminds me, if someone has a turnkey RSX or RSTS box around (that I could just plug in to SIMH and play with), ideally with DECNET support, please let me know. If you can't find one, I can make a RSTS image up for you. (I've never done DECnet under RSX, so that'd take me awhile to figure out) Which version of RSTS? I can give my disk image for my install of 10.1 if anyone wants to try and figure out what I did wrong or wants to make it in to a turnkey install it's pretty basic as i'm new to RSTS. (it has DECmail though) I'm cool with RSTS - whatever version is fine. Try http://gewt.net/rsts.7z It's RSTS/E v10.1 (so DCL OOTB), DECnet is installed but misconfigured, if you figure it out let me know. Also if you figure out how to rebuild the monitor let me know. A config is included in the archive that you'll want to modify a bit. I know the disk image says "v92" but trust me, it's 10.1. Password for 1,2 is "epicfail" (don't ask) It seems to not want to boot in simh git, but works in 3.8 and 3.9. (git may've been updated since I last tried, I should rebuild with debugging symbols and try and find the bug if it wasn't just me messing up). DECmail is also installed but not configured. And I may've just figured out why DECnet wasn't working, I'm going to go read the documentation and post back. If I've made a terrible example for a turnkey install tell me so I can try again. Sampsa PS: I will plague people with noob questions.. If you get good answers, let me know.

13 years, 1 month

DECUS RSX C compiler

by jg＠jordi.guillaumes.name

El 25/10/2012, a les 22:21, Jordi Guillaumes i Pons <jg at jordi.guillaumes.name> va escriure: Here is an excellent opportunity to debug something. You have the sources, you have listings and maps, and you have the failing address, along with the actual problem. Should be pretty easy to figure out. :-) Lol, yes, it is. I'll give it a try :) I can guess the program is trying to access a word using R3 as indirect register :) R3 is the only one with an odd content! :) Well, its sorta fixed... The compiler works OK if I DO NOT build the task agains FCSRES. It works if I answer "N" to both FCSRES and FCSFSL. So I've changed a compiler problem for a system configuration problem... :) Jordi Guillaumes i Pons jg at jordi.guillaumes.name HECnet: BITXOV::JGUILLAUMES

13 years, 1 month

RSTS/E 10.1 and OpenVMS via DECnet

by sampsa＠mac.com

On 27 Oct 2012, at 21:19, Cory Smelosky wrote: On Oct 27, 2012, at 2:06 PM, Dave McGuire <mcguire at neurotica.com> wrote: On 10/27/2012 03:57 AM, Sampsa Laine wrote: That reminds me, if someone has a turnkey RSX or RSTS box around (that I could just plug in to SIMH and play with), ideally with DECNET support, please let me know. If you can't find one, I can make a RSTS image up for you. (I've never done DECnet under RSX, so that'd take me awhile to figure out) Which version of RSTS? I can give my disk image for my install of 10.1 if anyone wants to try and figure out what I did wrong or wants to make it in to a turnkey install it's pretty basic as i'm new to RSTS. (it has DECmail though) I'm cool with RSTS - whatever version is fine. Sampsa PS: I will plague people with noob questions..

13 years, 1 month

RSTS/E 10.1 and OpenVMS via DECnet

by jeep＠scshome.net

-----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Fred Sent: Saturday, October 27, 2012 20:39 To: hecnet at Update.UU.SE Subject: RE: [HECnet] RSTS/E 10.1 and OpenVMS via DECnet On Sat, 27 Oct 2012, Steve Davidson wrote: How are you dealing with the dynamic-DNS issues? Er, manually ... :-/ Fred Shift the connection to this end (bridge.declab.net) and forget about it. It is all automatically taken care of here. I will need the IP of the other end though... -Steve

13 years, 1 month

RSTS/E 10.1 and OpenVMS via DECnet

by fcoffey＠misernet.net

On Sat, 27 Oct 2012, Steve Davidson wrote: How are you dealing with the dynamic-DNS issues? Er, manually ... :-/ Fred

13 years, 1 month

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

HECnet