Hops
LEGATO (2.1) =>QNA-1 /
?NETPTH Connection rejected, reason:
No response from destination process
$netpth
NETPTH>frugal=legato
[Routing path from LEGATO (2.1) to FRUGAL (33.14)]
Circuit EWA-0, Line synchronization lost
NCP>
**** OpenVMS Alpha Operating System V8.3 - BUGCHECK ****
** Bugcheck code = 000003C4: SSRVEXCEPT, Unexpected system service
exception
** Crash CPU: 00000000 Primary CPU: 00000000 Node Name: SLAVE
** Supported CPU count: 00000001
** Active CPUs: 00000000.00000001
** Current Process: NETACP
** Current PSB ID: 00000001
** Image Name: DSA0:[SYS0.SYSCOMMON.][SYSEXE]NETACP.EXE;1
*** keyboard not plugged in...
Should I attempt this from a conversational boot, or would that not help?
Thanks, Mark.
On Thu, 15 Sep 2011, hvlems at zonnet.nl wrote:
The output of
$ mc ncp show circ ewa-0 char
will tell you whether it worked: the attribute service must have the value enabled.
If that is not the case check:
$ mc ncp list circ ewa-0 char
The service enabled value must be present and reboot the system to make it effective.
You'll see decnet opcom messages only on OPA0 or on a terminal where the command $ REPLY/ENABLE was entered. Hans
Circuit EWA-0, Line synchronization lost
NCP>
**** OpenVMS Alpha Operating System V8.3 - BUGCHECK ****
** Bugcheck code = 000003C4: SSRVEXCEPT, Unexpected system service
exception
** Crash CPU: 00000000 Primary CPU: 00000000 Node Name: SLAVE
** Supported CPU count: 00000001
** Active CPUs: 00000000.00000001
** Current Process: NETACP
** Current PSB ID: 00000001
** Image Name: DSA0:[SYS0.SYSCOMMON.][SYSEXE]NETACP.EXE;1
*** keyboard not plugged in...
Should I attempt this from a conversational boot, or would that not help?
Thanks, Mark.
On Thu, 15 Sep 2011, hvlems at zonnet.nl wrote:
The output of
$ mc ncp show circ ewa-0 char
will tell you whether it worked: the attribute service must have the value enabled.
If that is not the case check:
$ mc ncp list circ ewa-0 char
The service enabled value must be present and reboot the system to make it effective.
You'll see decnet opcom messages only on OPA0 or on a terminal where the command $ REPLY/ENABLE was entered. Hans
Circuit EWA-0, Line synchronization lost
NCP>
**** OpenVMS Alpha Operating System V8.3 - BUGCHECK ****
** Bugcheck code = 000003C4: SSRVEXCEPT, Unexpected system service exception
** Crash CPU: 00000000 Primary CPU: 00000000 Node Name: SLAVE
** Supported CPU count: 00000001
** Active CPUs: 00000000.00000001
** Current Process: NETACP
** Current PSB ID: 00000001
** Image Name: DSA0:[SYS0.SYSCOMMON.][SYSEXE]NETACP.EXE;1
*** keyboard not plugged in...
Should I attempt this from a conversational boot, or would that not help?
Thanks, Mark.
On Thu, 15 Sep 2011, hvlems at zonnet.nl wrote:
The output of
$ mc ncp show circ ewa-0 char
will tell you whether it worked: the attribute service must have the value enabled.
If that is not the case check:
$ mc ncp list circ ewa-0 char
The service enabled value must be present and reboot the system to make it effective.
You'll see decnet opcom messages only on OPA0 or on a terminal where the command $ REPLY/ENABLE was entered. Hans
Circuit EWA-0, Line synchronization lost
NCP>
**** OpenVMS Alpha Operating System V8.3 - BUGCHECK ****
** Bugcheck code = 000003C4: SSRVEXCEPT, Unexpected system service
exception
** Crash CPU: 00000000 Primary CPU: 00000000 Node Name: SLAVE
** Supported CPU count: 00000001
** Active CPUs: 00000000.00000001
** Current Process: NETACP
** Current PSB ID: 00000001
** Image Name: DSA0:[SYS0.SYSCOMMON.][SYSEXE]NETACP.EXE;1
*** keyboard not plugged in...
** Dumping error log buffers to HBVS unit 0
**** Unable to dump error log buffers to remaining shadow set members
** Error log buffers not dumped to HBVS unit 100
Circuit EWA-0, Line synchronization lost
NCP>
**** OpenVMS Alpha Operating System V8.3 - BUGCHECK ****
** Bugcheck code = 000003C4: SSRVEXCEPT, Unexpected system service
exception
** Crash CPU: 00000000 Primary CPU: 00000000 Node Name: SLAVE
** Supported CPU count: 00000001
** Active CPUs: 00000000.00000001
** Current Process: NETACP
** Current PSB ID: 00000001
** Image Name: DSA0:[SYS0.SYSCOMMON.][SYSEXE]NETACP.EXE;1
*** keyboard not plugged in...
** Dumping error log buffers to HBVS unit 0
**** Unable to dump error log buffers to remaining shadow set members
** Error log buffers not dumped to HBVS unit 100
Circuit EWA-0, Line synchronization lost
NCP>
**** OpenVMS Alpha Operating System V8.3 - BUGCHECK ****
** Bugcheck code = 000003C4: SSRVEXCEPT, Unexpected system service exception
** Crash CPU: 00000000 Primary CPU: 00000000 Node Name: SLAVE
** Supported CPU count: 00000001
** Active CPUs: 00000000.00000001
** Current Process: NETACP
** Current PSB ID: 00000001
** Image Name: DSA0:[SYS0.SYSCOMMON.][SYSEXE]NETACP.EXE;1
*** keyboard not plugged in...
** Dumping error log buffers to HBVS unit 0
**** Unable to dump error log buffers to remaining shadow set members
** Error log buffers not dumped to HBVS unit 100
