On Sat, Jan 3, 2015 at 1:34 AM, Johnny Billquist <bqt at softjar.se> wrote:
On 2015-01-02 18:28, Hans Vlems wrote:
Is there an advantage if you use a tunnel in stead of Johnny's bridge
program which I use?
It scales better and use less network bandwidth, if that is a concern.
But it won't pass through LAT or MOP. Pick your poison. :-)
It does scale better. However, it is possible to bridge LAT and/or MOP over the link also.
Regards, Tim.
On Sat, Jan 3, 2015 at 1:34 AM, Steve Davidson <steve at davidson.net> wrote:
Tim,
I am running DEChub 90's. Does the brouter work there or require the '900 platform? Actually I have extra power supplies come to think of it. Does the brouter require any special cabling? Thanks!
DEChub90s are perfect. It is not a DEChub900 module.
There is no special cabling. It has serial interfaces, but they won't be used. They have either a 10Base2 coaxial connection on top, or a 10baseT port on the front. Obviously, if they are in a DEChub, then they connect into the backplane like all the other modules.
Did you see my reply over DECnet?
Regards, Tim.
On 2015-01-02 18:28, Hans Vlems wrote:
Is there an advantage if you use a tunnel in stead of Johnny's bridge
program which I use?
It scales better and use less network bandwidth, if that is a concern.
But it won't pass through LAT or MOP. Pick your poison. :-)
Johnny
Hans
Verzonden vanaf mijn BlackBerry 10-smartphone.
*Van: *Tim Sneddon
*Verzonden: *vrijdag 2 januari 2015 18:24
*Aan: *hecnet at update.uu.se
*Beantwoorden: *hecnet at Update.UU.SE
*Onderwerp: *Re: [HECnet] Hecnet Peering
On Sat, Jan 3, 2015 at 1:17 AM, Steve Davidson <steve at davidson.net
<mailto:steve at davidson.net>> wrote:
Tim,
The short form... DEChubs are us. I have both the backplanes and
the MultiStacks. They currently have hubs, LAT servers, and
dedicated LAT printer modules. I even have the Packet Probe module
with software...
That should work nicely.
Regards, Tim.
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
Tim,
I am running DEChub 90's. Does the brouter work there or require the '900 platform? Actually I have extra power supplies come to think of it. Does the brouter require any special cabling? Thanks!
-Steve
On Jan 2, 2015, at 12:28, Hans Vlems <hvlems at zonnet.nl> wrote:
Is there an advantage if you use a tunnel in stead of Johnny's bridge program which I use?
Hans
Verzonden vanaf mijn BlackBerry 10-smartphone.
Van: Tim Sneddon
Verzonden: vrijdag 2 januari 2015 18:24
Aan: hecnet at update.uu.se
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: Re: [HECnet] Hecnet Peering
On Sat, Jan 3, 2015 at 1:17 AM, Steve Davidson <steve at davidson.net> wrote:
Tim,
The short form... DEChubs are us. I have both the backplanes and the MultiStacks. They currently have hubs, LAT servers, and dedicated LAT printer modules. I even have the Packet Probe module with software...
That should work nicely.
Regards, Tim.
On Sat, Jan 3, 2015 at 1:28 AM, Hans Vlems <hvlems at zonnet.nl> wrote:
Is there an advantage if you use a tunnel in stead of Johnny's bridge program which I use?
Hi Hans,
Not really. I think it was Brian Hechinger that started it. I joined in almost straight away as I had an old DECbrouter 90T2a and a long history of working with them.
Regards, Tim.
Is there an advantage if you use a tunnel in stead of Johnny's bridge program which I use?
Hans
Verzonden vanaf mijn BlackBerry 10-smartphone.
Van: Tim Sneddon
Verzonden: vrijdag 2 januari 2015 18:24
Aan: hecnet at update.uu.se
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: Re: [HECnet] Hecnet Peering
On Sat, Jan 3, 2015 at 1:17 AM, Steve Davidson <steve at davidson.net> wrote:
Tim,
The short form... DEChubs are us. I have both the backplanes and the MultiStacks. They currently have hubs, LAT servers, and dedicated LAT printer modules. I even have the Packet Probe module with software...
That should work nicely.
Regards, Tim.
On Sat, Jan 3, 2015 at 1:17 AM, Steve Davidson <steve at davidson.net> wrote:
Tim,
The short form... DEChubs are us. I have both the backplanes and the MultiStacks. They currently have hubs, LAT servers, and dedicated LAT printer modules. I even have the Packet Probe module with software...
That should work nicely.
Regards, Tim.
Tim,
The short form... DEChubs are us. I have both the backplanes and the MultiStacks. They currently have hubs, LAT servers, and dedicated LAT printer modules. I even have the Packet Probe module with software...
-Steve
On Jan 2, 2015, at 12:09, Tim Sneddon <tim at sneddon.id.au> wrote:
On Sat, Jan 3, 2015 at 12:58 AM, Steve Davidson <steve at davidson.net> wrote:
How much should I expect to pay for one of these units?
It depends. A Cisco 1841 with nothing in it (just Ethernet interfaces) can be as cheap as $50. The DECbrouters can be as low as $20. The only killer about the DECbrouter is that unless you have a DEChub or MultiStack, finding one with a power supply is a pain. If you have a DEChub (or MultiStack), then I can ship you one for free in a few weeks. I have appropriate versions of software for all.
Regards, Tim.
On Sat, Jan 3, 2015 at 12:58 AM, Steve Davidson <steve at davidson.net> wrote:
How much should I expect to pay for one of these units?
It depends. A Cisco 1841 with nothing in it (just Ethernet interfaces) can be as cheap as $50. The DECbrouters can be as low as $20. The only killer about the DECbrouter is that unless you have a DEChub or MultiStack, finding one with a power supply is a pain. If you have a DEChub (or MultiStack), then I can ship you one for free in a few weeks. I have appropriate versions of software for all.
Regards, Tim.
How much should I expect to pay for one of these units?
-Steve
On Jan 2, 2015, at 11:52, Tim Sneddon <tim at sneddon.id.au> wrote:
On Sat, Jan 3, 2015 at 12:42 AM, Steve Davidson <steve at davidson.net> wrote:
Tim,
What are the hardware/software requirements for these tunnels?
Hi Steve,
They are just Cisco (or DEC-branded Cisco) routers that are connected via a mesh of GRE tunnels. The tunnels themselves only run DECnet over them (Phase IV, although OSI could be done). I now use a Cisco 1841. However, I previously used a DECbrouter 90T2a. I know that others use various other models of Cisco routers 3000 and 7000 series, I believe.
Regards, Tim.
-Steve
Hollis, NH (US)
On Jan 2, 2015, at 11:34, Tim Sneddon <tim at sneddon.id.au> wrote:
On Fri, Jan 2, 2015 at 10:25 PM, Peter Lothberg <roll at stupi.se> wrote:
> Think that the config below wouldn=E2=80=99t work s the decent node-type =
> is routing-iv which is a L1 router?
My fault. If you talk to dimma in area 59 it should say;
decnet node-type area
Hi Peter,
I would love to get tunnels up and running to your part of the world. We did talk about it about 6 months back, but nothing ever came of it. Are you still interested? My endpoint is 120.146.225.243.
Regards, Tim.
