Hello!
I've been seeing them. On both places. However Google Mail because how
list servers re-write headers insists that your e-mail can not be
coming from where it says. I promptly move it from the Spam bucket
back to the Inbox.
I have that same problem with other lists and mail written by folks
from certain banks.
-----
Gregg C Levine gregg.drwho8 at gmail.com
"This signature fought the Time Wars, time and again."
On Tue, Apr 8, 2014 at 7:00 AM, John H. Reinhardt
<johnhreinhardt at yahoo.com> wrote:
On 4/8/2014 6:26 AM, Rok Vidmar wrote:
Just seeing if this shows up for me.
Some listservers do not echo messages to OP. The
same is true for some UAs, GMail for instance.
There is no better test for a computer than letting it
run an operating system. There is no better test for a
list than sending a relevant, widely interesting post :)
--
Regards, Rok
Ah, but they used to show up. It's just been in the last week that they
have stopped (I'm guessing, I haven't had a need to post to either in a
while until a few days ago). It's happening on both HECnet and DECtec
mailing lists. Although on DECtec, if I reply to someone like I am now, it
often does get echoed back to me. On HECnet, it does not.
John H. Reinhardt
Ah was that it. I thought the 50 denoted the 2-cpu version,
the 00 the single cpu and that the 83xx was the faster version? of the 82xx
I always had trouble with this too, but here's the scoop -
VAX-8200 - 1x KA820 (T1001-00) CPU
VAX-8250 - 1x KA825 (T1001-YA) CPU
VAX-8300 - 2x KA820 CPU
VAX-8350 - 2x KA825 CPU
The model numbers corresponded to the CPU cards (e.g. KA820 -> 8200, KA825 -> 8250) ...
The KA825 (T1001-YA) was simply a faster version (6.25MHz vs 5MHz) of the same KA820.
Bob
On 4/8/2014 6:26 AM, Rok Vidmar wrote:
Just seeing if this shows up for me.
Some listservers do not echo messages to OP. The
same is true for some UAs, GMail for instance.
There is no better test for a computer than letting it
run an operating system. There is no better test for a
list than sending a relevant, widely interesting post :)
--
Regards, Rok
Ah, but they used to show up. It's just been in the last week that they have stopped (I'm guessing, I haven't had a need to post to either in a while until a few days ago). It's happening on both HECnet and DECtec mailing lists. Although on DECtec, if I reply to someone like I am now, it often does get echoed back to me. On HECnet, it does not.
John H. Reinhardt
Just seeing if this shows up for me.
Some listservers do not echo messages to OP. The
same is true for some UAs, GMail for instance.
There is no better test for a computer than letting it
run an operating system. There is no better test for a
list than sending a relevant, widely interesting post :)
--
Regards, Rok
Your other reply, like this got on both lists
Verzonden vanaf mijn BlackBerry 10-smartphone.
Origineel bericht
Van: John H. Reinhardt
Verzonden: dinsdag 8 april 2014 09:05
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: [HECnet] Another test - sorry
Just seeing if this shows up for me.
So far nothing I've attempted to post to HECnet has gotten echoed back
to me. I can't tell if it's getting to the list or not.
John H. Reinhardt
Ah was that it. I thought the 50 denoted the 2-cpu version, the 00 the single cpu and that the 83xx was the faster version of the 82xx
Verzonden vanaf mijn BlackBerry 10-smartphone.
Origineel bericht
Van: John H. Reinhardt
Verzonden: dinsdag 8 april 2014 09:03
Aan: DEC discussion list.; hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: Re: [DECtec] [HECnet] No VCF for me, but...
On 4/8/2014 2:48 AM, Hans Vlems wrote:
AFAIK just the cpu speed. IIRC the 8250 is rated at
1.2 VUPS and the 8350 at 1.4. But this is from memory which is known to have some issues :(
On Tue, Apr 08, 2014 at 12:26:36AM -0400, Dave McGuire wrote:
On 04/07/2014 02:59 AM, John H. Reinhardt wrote:
Yup! I just got it running a few months ago. I'm hoping to turn it
into an 8350 soon. I like that machine a lot.
What differs the 8250 and 8350 ?
I may have some BI boards (CPU and Memory if I recall correctly). If you
need them I'm willing to trade them for something fun.
/P
Hans, That's the difference between the 8200/8300 and 8250/8350. The
difference between the 82xx and 83xx is that the 83xx was a 2-cpu SMP
system while the 82xx was a single cpu.
The 8200/8300 was fairly short-lived before the 8250/8350 came out.
John H. Reinhardt
Just seeing if this shows up for me.
So far nothing I've attempted to post to HECnet has gotten echoed back to me. I can't tell if it's getting to the list or not.
John H. Reinhardt
El 08/04/2014, a les 8:23, Pontus Pihlgren <pontus at Update.UU.SE> va escriure:
On Tue, Apr 08, 2014 at 12:26:36AM -0400, Dave McGuire wrote:
On 04/07/2014 02:59 AM, John H. Reinhardt wrote:
Yup! I just got it running a few months ago. I'm hoping to turn it
into an 8350 soon. I like that machine a lot.
What differs the 8250 and 8350 ?
I may have some BI boards (CPU and Memory if I recall correctly). If you
need them I'm willing to trade them for something fun.
IIRC the 8350 is a dual-CPU machine.
The 8250 was my first VAX. A TU81, a RA81 and 8 megabytes of RAM...
The memories...
/P
On 4/8/2014 2:48 AM, Hans Vlems wrote:
AFAIK just the cpu speed. IIRC the 8250 is rated at
1.2 VUPS and the 8350 at 1.4. But this is from memory which is known to have some issues :(
On Tue, Apr 08, 2014 at 12:26:36AM -0400, Dave McGuire wrote:
On 04/07/2014 02:59 AM, John H. Reinhardt wrote:
Yup! I just got it running a few months ago. I'm hoping to turn it
into an 8350 soon. I like that machine a lot.
What differs the 8250 and 8350 ?
I may have some BI boards (CPU and Memory if I recall correctly). If you
need them I'm willing to trade them for something fun.
/P
Hans, That's the difference between the 8200/8300 and 8250/8350. The difference between the 82xx and 83xx is that the 83xx was a 2-cpu SMP system while the 82xx was a single cpu.
The 8200/8300 was fairly short-lived before the 8250/8350 came out.
John H. Reinhardt
--
DECtec mailing list
http://dectec.info
To unsubscribe from this list see page at: http://dectec.info/mailman/listinfo/dectec_dectec.info
Jordi Guillaumes i Pons
Barcelona - Catalunya - Europa
El 08/04/2014, a les 8:23, Pontus Pihlgren <pontus at Update.UU.SE> va escriure:
On Tue, Apr 08, 2014 at 12:26:36AM -0400, Dave McGuire wrote:
On 04/07/2014 02:59 AM, John H. Reinhardt wrote:
Yup! I just got it running a few months ago. I'm hoping to turn it
into an 8350 soon. I like that machine a lot.
What differs the 8250 and 8350 ?
I may have some BI boards (CPU and Memory if I recall correctly). If you
need them I'm willing to trade them for something fun.
/P
