On 2013-05-24 18:20, Paul_Koning at Dell.com wrote:
On May 24, 2013, at 12:15 PM, Brian Schenkenberger, VAXman- wrote:
...
So, here are a few photographs of some original Ethernet (10base5) bits
I have here -- Etherpipe, AUI cables, and h4000s and h4005s. I put the
camera away before I'd realized that I'd not photographed the tap tool.
I hope you won't be too disappointed in that.
http://tmesis.net/10base5/
Nice. Interesting to see the yellow stuff, I remember that in prototype installations but from what I was told, DEC switched to the brownish/orange teflon jacketed cable for customer shipments. Something to do with flame rating for air handling spaces (i.e., dropped ceiling office areas).
I think we still have some yellow coax under the floor, still with transcievers attached, in the hall where Magica and Mim are located. However, the coax is cut somewhere, so it is no longer usable, and I don't think we have DEC transcievers, but I can't remember what we have. Maybe someone could check and take a photo.
All of that was installed along with our two DEC-2060s back in the 80s...
And it's definitely bright yellow.
Johnny
On 05/24/2013 08:58 AM, Clem Cole wrote:
I fear a sad part of this slide show is that many of us remember and were
part of it all. Some of us programmed these machines (I admit that I still
have some of these pieces in my basement). I was disappointed they did not
show a "stinger tap." The picture of the Alto shows the first mouse the
Hawley Labs mechanical mouse (which I miss for its feel). Check out the
picture of the first Cisco router using Intel Multibus (with a Motorola 68k
in it) looking so awkward.
http://www.eweek.com/networking/slideshows/ethernet-marks-40-years-linking-…
Speaking of which, I am now back in touch with my former employer and
mentor. I may have mentioned him before; I worked for him ~25 years ago and
learned a great deal from him, but we'd subsequently lost touch. Many years
before we met, he was the chairman of IEEE committee 802.3. Before that, he
was one of the developers of OS/360.
I'm going to go to NJ to visit him soon; I'll see if he has any of his
802.3 slides or conference materials left.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On 05/24/2013 08:58 AM, Clem Cole wrote:
I fear a sad part of this slide show is that many of us remember and were
part of it all. Some of us programmed these machines (I admit that I still
have some of these pieces in my basement). I was disappointed they did not
show a "stinger tap." The picture of the Alto shows the first mouse the
Hawley Labs mechanical mouse (which I miss for its feel). Check out the
picture of the first Cisco router using Intel Multibus (with a Motorola 68k
in it) looking so awkward.
That's a Cisco AGS or AGS+. I've deployed a bunch of those, and ran one
for my home T1 for a long time (back when that was a lot of bandwidth!), and
I still have one here, but it's about to get shipped out to Josh Dersch in
Washington as part of a swap deal. But I still have an MGS and a CGS, which
are the same thing but smaller chassis with fewer slots.
Multibus, yes...but that's not the worst of it! Some here are no doubt
familiar with NuBus, which is generally known as the expansion slot bus of
the Apple Macintosh II. It's not an Apple bus, however! I don't recall
where it hails from, but it's a general purpose bus, and a pretty nice one at
that.
Anyway, the difference between the AGS and the AGS+ is that the AGS+ card
cage has a second backplane, with DIN-style triple-row connectors, where the
Multibus P2 card-edge connectors would normally go. That's the Cbus, a
32-bit-wide bus operating at something like 16MHz, quite a bit faster than
the Multibus interconnect. A Cbus Controller card was plugged in, which
acted as a bridge between Multibus and Cbus. The Cbus Controller had a bit
of very fast packet memory, and a purpose-built microcoded processor to
handle communications. Packet memory was slotted dynamically at
configuration time, divided up by the MTU settings on the attached
interfaces. It was a very nice system; highly capable and very flexible.
Peter will correct me if I'm wrong here, but the word on the street was
that when the new "flagship" Cisco 7000 was introduced, its routing
performance was lackluster compared to a well-configured AGS+, which caused
some issues with 7000 adoption. Later 7000-family hardware enhancements
corrected those performance issues.
To drag this kicking and screaming to on-topicness...I'm sure someone here
can tell the story of where ciscoSystems came from, more or less as a cash
cow that eventually resulted in the founding of XKL.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On May 24, 2013, at 12:15 PM, Brian Schenkenberger, VAXman- wrote:
...
So, here are a few photographs of some original Ethernet (10base5) bits
I have here -- Etherpipe, AUI cables, and h4000s and h4005s. I put the
camera away before I'd realized that I'd not photographed the tap tool.
I hope you won't be too disappointed in that.
http://tmesis.net/10base5/
Nice. Interesting to see the yellow stuff, I remember that in prototype installations but from what I was told, DEC switched to the brownish/orange teflon jacketed cable for customer shipments. Something to do with flame rating for air handling spaces (i.e., dropped ceiling office areas).
paul
Gregg Levine <gregg.drwho8 at gmail.com> writes:
On Fri, May 24, 2013 at 10:25 AM, Brian Schenkenberger, VAXman-
<system at tmesis.com> wrote:
h vlems <hvlems at zonnet.nl> writes:
Yes, an H4005 was shown but no H4000
I've got some here if you want to see pictures of them.
--
VAXman- A Bored Certified VMS Kernel Mode Hacker VAXman(at)TMESIS(dot)ORG
Well I speak to machines with the voice of humanity.
Hello!
(I did not see the fact that the original thread was cross-posted to
the TUHS list as well as this one, until after the fact.)
Now that I'd be interested in seeing.
It happens that a shop in Manhattan was collecting and attempting to
sell large quantities of Ethernet hardware. And I was the only buyer.
It annoyed them that I was both the only buyer and the only one in the
space who knew what they were.
I wasn't feeling ambitious enough to trudge out the whole lighting "kit
and kaboodle" <http://tmesis.net/Photography/Ummagumma.JPG>, so I took a
few photos on the kitchen table with the 50mm f/1.2 using the available
light from the kitchen window (not much since it's raining). That 50mm
f/1.2 is very good in low lighting but it also has a depth of field that
is thinner than rice paper, so the bokeh is quite evident in the photos
I took. I would have needed the lighting kit to use any of the macros.
I hope to someday build a light box so that I can do proper photographs
of kit like this.
So, here are a few photographs of some original Ethernet (10base5) bits
I have here -- Etherpipe, AUI cables, and h4000s and h4005s. I put the
camera away before I'd realized that I'd not photographed the tap tool.
I hope you won't be too disappointed in that.
http://tmesis.net/10base5/
--
VAXman- A Bored Certified VMS Kernel Mode Hacker VAXman(at)TMESIS(dot)ORG
Well I speak to machines with the voice of humanity.
I'be installed plenty so no thanks Brian...
Van: Brian Schenkenberger, VAXman-
Verzonden: vrijdag 24 mei 2013 16:26 PM
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: Re: [HECnet] Ethernet Marks 40 Years Linking People, Computers in a
Wired World
h vlems <hvlems at zonnet.nl> writes:
>Yes, an H4005 was shown but no H4000
I've got some here if you want to see pictures of them.
--
VAXman- A Bored Certified VMS Kernel Mode Hacker VAXman(at)TMESIS(dot)ORG
Well I speak to machines with the voice of humanity.
On Fri, May 24, 2013 at 10:25 AM, Brian Schenkenberger, VAXman-
<system at tmesis.com> wrote:
h vlems <hvlems at zonnet.nl> writes:
Yes, an H4005 was shown but no H4000
I've got some here if you want to see pictures of them.
--
VAXman- A Bored Certified VMS Kernel Mode Hacker VAXman(at)TMESIS(dot)ORG
Well I speak to machines with the voice of humanity.
Hello!
(I did not see the fact that the original thread was cross-posted to
the TUHS list as well as this one, until after the fact.)
Now that I'd be interested in seeing.
It happens that a shop in Manhattan was collecting and attempting to
sell large quantities of Ethernet hardware. And I was the only buyer.
It annoyed them that I was both the only buyer and the only one in the
space who knew what they were.
-----
Gregg C Levine gregg.drwho8 at gmail.com
"This signature fought the Time Wars, time and again."
h vlems <hvlems at zonnet.nl> writes:
Yes, an H4005 was shown but no H4000
I've got some here if you want to see pictures of them.
--
VAXman- A Bored Certified VMS Kernel Mode Hacker VAXman(at)TMESIS(dot)ORG
Well I speak to machines with the voice of humanity.
Yes, an H4005 was shown but no H4000
Van: Gregg Levine
Verzonden: vrijdag 24 mei 2013 15:58 PM
Aan: hecnet at update.uu.se
Beantwoorden: hecnet at Update.UU.SE
Cc: tuhs at minnie.tuhs.org; dectec-request at dectec.info
Onderwerp: Re: [HECnet] Ethernet Marks 40 Years Linking People, Computers in a
Wired World
On Fri, May 24, 2013 at 8:58 AM, Clem Cole <clemc at ccc.com> wrote:
> I fear a sad part of this slide show is that many of us remember and were
> part of it all. Some of us programmed these machines (I admit that I
> still have some of these pieces in my basement). I was disappointed they
> did not show a "stinger tap." The picture of the Alto shows the first mouse
> the Hawley Labs mechanical mouse (which I miss for its feel). Check out
> the picture of the first Cisco router using Intel Multibus (with a Motorola
> 68k in it) looking so awkward.
>
> http://www.eweek.com/networking/slideshows/ethernet-marks-40-years-linking-…
Hello!
Then you did not notice the one which attempts to describe the widget
attached to the yellow cable. It was a tap who used the stinger
design. It was an interesting slide show, but it did not go into
complete detail.
Charles Spurgeon wrote an excellent book on Ethernet which as it
happens to explain practically everything about the entire ideas
behind it.
-----
Gregg C Levine gregg.drwho8 at gmail.com
"This signature fought the Time Wars, time and again."
On Fri, May 24, 2013 at 8:58 AM, Clem Cole <clemc at ccc.com> wrote:
I fear a sad part of this slide show is that many of us remember and were
part of it all. Some of us programmed these machines (I admit that I
still have some of these pieces in my basement). I was disappointed they
did not show a "stinger tap." The picture of the Alto shows the first mouse
the Hawley Labs mechanical mouse (which I miss for its feel). Check out
the picture of the first Cisco router using Intel Multibus (with a Motorola
68k in it) looking so awkward.
http://www.eweek.com/networking/slideshows/ethernet-marks-40-years-linking-…
Hello!
Then you did not notice the one which attempts to describe the widget
attached to the yellow cable. It was a tap who used the stinger
design. It was an interesting slide show, but it did not go into
complete detail.
Charles Spurgeon wrote an excellent book on Ethernet which as it
happens to explain practically everything about the entire ideas
behind it.
-----
Gregg C Levine gregg.drwho8 at gmail.com
"This signature fought the Time Wars, time and again."