El 13/04/2013, a les 13:52, Steve Davidson <jeep at scshome.net> va escriure:
STRGTE::DCL_PROCEDURES
STRGTE::RT-11
STRGTE::SYSTEM_MANAGEMENT
STRGTE::VMS_SYSTEM_MANAGEMENT
I can't access any of those. From the native NOTES interface I get a "Network partner exited" error. Perhaps the permisions are not correctly set up?
Jordi Guillaumes i Pons
jg at jordi.guillaumes.name
HECnet: BITXOV::JGUILLAUMES
On 13 Apr 2013, at 16:17, Sampsa Laine <sampsa at mac.com> wrote:
Is there a nice beginners guide to using NOTES anywhere?
Googling for it myself, managed to read some conf's and even reply to a post :)
Also, do I need a "proper" keyboard to use it or will my laptop one do?
Apparently not. I find the interface a tad confusing. Oh well, there's always PYFFLE, but nobody will use that anyway :)
sampsa <sampsa at mac.com>
mobile +961 788 10537
Is there a nice beginners guide to using NOTES anywhere?
Also, do I need a "proper" keyboard to use it or will my laptop one do?
sampsa <sampsa at mac.com>
mobile +961 788 10537
On 13 Apr 2013, at 14:52, Steve Davidson <jeep at scshome.net> wrote:
Also...
STRGTE::DCL_PROCEDURES
STRGTE::RT-11
STRGTE::SYSTEM_MANAGEMENT
STRGTE::VMS_SYSTEM_MANAGEMENT
-Steve
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On
Behalf Of Jordi Guillaumes i Pons
Sent: Saturday, April 13, 2013 7:16 AM
To: hecnet at Update.UU.SE
Subject: [HECnet] NOTES conferences recap
Just as a reminder, these are the live NOTES conferences I know about.
If anyone has any other public conference, please make us now.
LABVAX::HECNET HECnet topics
LABVAX::WHATEVER General discussions, gossip and so on...
BITXOW::MAINFRAMES Emulating IBM mainframes
MISER::LINUX Distro-agnostic linux discussion
Jordi Guillaumes i Pons
jg at jordi.guillaumes.name
HECnet: BITXOV::JGUILLAUMES
Also...
STRGTE::DCL_PROCEDURES
STRGTE::RT-11
STRGTE::SYSTEM_MANAGEMENT
STRGTE::VMS_SYSTEM_MANAGEMENT
-Steve
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On
Behalf Of Jordi Guillaumes i Pons
Sent: Saturday, April 13, 2013 7:16 AM
To: hecnet at Update.UU.SE
Subject: [HECnet] NOTES conferences recap
Just as a reminder, these are the live NOTES conferences I know about.
If anyone has any other public conference, please make us now.
LABVAX::HECNET HECnet topics
LABVAX::WHATEVER General discussions, gossip and so on...
BITXOW::MAINFRAMES Emulating IBM mainframes
MISER::LINUX Distro-agnostic linux discussion
Jordi Guillaumes i Pons
jg at jordi.guillaumes.name
HECnet: BITXOV::JGUILLAUMES
El 13/04/2013, a les 13:17, Sampsa Laine <sampsa at mac.com> va escriure:
LABVAX::HECNET HECnet topics
LABVAX::WHATEVER General discussions, gossip and so on...
I forgot I was running those :)
Well, that speaks wonders about NOTES, and our beloved machines and systems in general. They keep running even if the owner forgets about them ;)
Jordi Guillaumes i Pons
jg at jordi.guillaumes.name
HECnet: BITXOV::JGUILLAUMES
Just as a reminder, these are the live NOTES conferences I know about. If anyone has any other public conference, please make us now.
LABVAX::HECNET HECnet topics
LABVAX::WHATEVER General discussions, gossip and so on...
BITXOW::MAINFRAMES Emulating IBM mainframes
MISER::LINUX Distro-agnostic linux discussion
Jordi Guillaumes i Pons
jg at jordi.guillaumes.name
HECnet: BITXOV::JGUILLAUMES
Forgot to mention, you need to login as "pyffle" at the UNIX prompt for the BBS.
sampsa
On 13 Apr 2013, at 13:13, Sampsa Laine <sampsa at mac.com> wrote:
Gentlemen,
I managed to get the Linux DECNET stack on PYFFLE to work again, so it is now accessible through HECNET once more.
It's basically a classic BBS / discussion system + UUCP gateway to UUHECNET, made to look like Waffle BBS (the software that ran Mindvox).
So if you're bored, try SET HOST'ing to PYFFLE at your leisure.
http://en.wikipedia.org/wiki/Waffle_(BBS_software)http://en.wikipedia.org/wiki/Mindvox
sampsa <sampsa at mac.com>
mobile +961 788 10537
Gentlemen,
I managed to get the Linux DECNET stack on PYFFLE to work again, so it is now accessible through HECNET once more.
It's basically a classic BBS / discussion system + UUCP gateway to UUHECNET, made to look like Waffle BBS (the software that ran Mindvox).
So if you're bored, try SET HOST'ing to PYFFLE at your leisure.
http://en.wikipedia.org/wiki/Waffle_(BBS_software)http://en.wikipedia.org/wiki/Mindvox
sampsa <sampsa at mac.com>
mobile +961 788 10537
On 2013-04-10 14:41, Johnny Billquist wrote:
On 2013-04-10 04:46, Cory Smelosky wrote:
Hey all,
Quick question: How would I create a LAT terminal on RSX-11M+? What
manual covers that? Did I forget to create them when I did a SYSGEN? ;)
(btw, RSX-11M+ on SIMH works properly with DECnet now)
Thanks!
Noted that you had already solved the question, but a few comments and
information that people might find useful:
DECnet and LAT in general is not covered by SYSGEN (with the one
exception that you have to answer yes to a question in SYSGEN to allow
networks to be installed later).
While DECnet holds the LAT pieces, and DECGEN compiles everything, the
NETINS.CMD that gets created will not setup LAT completely. You need to
add one line to NETINS.CMD - right before the LCP START command, you
should add an LCP CREATE command).
LAT has its own database - both a permanent and a current, just like
NCP. You set values for both with LCP. There you can define how many
terminals you want, names of services, and what not.
Manuals for RSX, DECnet, as well as some layered products are not only
available at bitsavers. Stromasys (the Charon owners) also have RSX
manuals available. See
http://www.stromasys.ch/support/support-downloadds/charon-tb-downoads/
Spelling errors:
http://www.stromasys.ch/support/support-downloads/charon-tb-downloads/ is the correct url.
Johnny
