They most certainly do!
1841:
interface FastEthernet0/0.3
description Transit network to FW pair (10.42.255.18/19)
encapsulation dot1Q 504
ip address 10.42.255.17 255.255.255.248
ip nat inside
ip virtual-reassembly
ip ospf 3000 area 0
ipv6 address 2001:470:88CE:FFFF:FFFF:FFFF:FFFF:1/125
ipv6 ospf 3001 area 0
end
1811w:
interface FastEthernet0
ip address 10.42.255.1 255.255.255.252
ip ospf priority 200
duplex auto
speed auto
ipv6 address 2001:470:88CE:FFFF:FFFF:FFFF:FFFF:12/125
ipv6 ospf 3001 area 0
end
-brian
On 2/1/2013 9:06 PM, Ian McLaughlin wrote:
Does it do IPv6? Like I mentioned, I have native IPv6 at the data center connected directly to Canada's CAnet academic backbone.
Ian
On 2013-02-01, at 5:41 PM, Brian Hechinger <wonko at 4amlunch.net> wrote:
On 2/1/2013 5:53 PM, Ian McLaughlin wrote:
No dice.
Anyone know of a 2600 IOS image that fits in 16Mb that supports Decnet and ipv6? Oh, and ssh would be nice too:)
The 2600 that I acquired only has 16Mb of flash.
You know, in addition to the 1841 becoming available the 1811w is also going to be available. I might have to send one of those to you and one to Steve.
-brian
---
Filter service subscribers can train this email as spam or not-spam here: http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=B952ECDC6CD911E29…
On 2013-02-04 02:52, Michael Holmes wrote:
Johnny,
I'm close to getting the multinet link to Scott active and so need to register my two nodes
Mason 39.1
Roxy 39.10
Registered.
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
Johnny,
I'm close to getting the multinet link to Scott active and so need to register my two nodes
Mason 39.1
Roxy 39.10
Mason is a Alphaserver 800 and Roxy is a DEC 3000/300L
Thanks
Mike
Register your nodename/address pairs with Johnny. You have addresses 8.600 through 8.609.
Create Multinet Circuit TCP-0-0 using address 46.65.175.115, cost 1, timeout 300.
GORVAX:: is waiting for the connection...
Any problems/questions send me email. I will try to answer ASAP.
-Steve
From: oe5ewl at gmail.com on behalf of Ing. Wolfgang Eichberger
Sent: Fri 2/1/2013 16:54
To: Steve Davidson
Subject: Re: [HECnet] Joining HECNET
Thank you, Steve, for offering help: The Information you need: > Your physical location: country at a minimum - this determines which Multinet router you will connect to I live in Linz, Austria, Central Europe. You can have my full post-adress if you need it. I have no problem with that. > External dynamic - DNS name - this will be resolved every x number of minutes to maintain your link oe5ewl.dyndns.org - this is updated frequently. > DECnet area - this is used for naming the Multinet circuits > > email address to send updates to (both external and internal (<node>::<username>)) You can reach me via oe5ewl at gmail.com (wolfgang at eichberger.org) or MINE::EICHWO Regards and a big Thanks from my side, Wolfgang
So I've finally got internet access in my new hometown of Beirut, and it actually works reasonably well - but it's not exactly cheap - 5GB cap = USD 99.
I think I'll wait for the DSL to be installed before running any significant traffic :)
sampsa
I can do end-nodes, routing-non-area in area 59, but nothing without a
stable IPv4 or IPv6 address.
And I'll do nodes (with Multinet connections) in area 2.
Bob
I got your email. I will deal with this later this evening or first
thing tomorrow morning.
-Steve
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On
Behalf Of Wolfgang Eichberger
Sent: Friday, February 01, 2013 16:50
To: hecnet at update.uu.se
Subject: Re: [HECnet] Joining HECNET
Thank you for your replies!
If it is easier for you I can set up an area router too. I only
thought running end nodes would not occupy a whole area...
Steve, I gladly sent you an email...
Regards,
Wolfgang
My apologies - the page is visible now.
On Sat, Feb 02, 2013 at 12:23:33PM -0500, Cory Smelosky wrote:
On 2 Feb 2013, at 08:06, Wolfgang Eichberger <oe5ewl at gmail.com> wrote:
It may be my connection, but I cannot view any contents regarding HEC-/DECNet.
I am able to view content, but a login is required.
Regards,
Wolfgang
--
Ing. Wolfgang Eichberger
Homepage: www.eichberger.org - Blog: 5ewl.blogspot.com - Genealogy:
genealogie.eichberger.org
Ahnenforschung Dauersuche: A(E)ichberger, B(P)ruckmayr in Ober?sterreich
2013/2/2 Erik Olofsen <e.olofsen at xs4all.nl>:
Just to let you know that I started with a few lines on
http://rullf2.xs4all.nl:81/mediawiki/index.php/HECnet
Comments and topics are welcome (in contrast with a real Wiki,
mine is read-only at present).
--
Cory Smelosky
http://gewt.net/ Personal stuff!
http://gimme-sympathy.org/ My permanently-a-work-in-progress pet project.
On 2 Feb 2013, at 08:06, Wolfgang Eichberger <oe5ewl at gmail.com> wrote:
It may be my connection, but I cannot view any contents regarding HEC-/DECNet.
I am able to view content, but a login is required.
Regards,
Wolfgang
--
Ing. Wolfgang Eichberger
Homepage: www.eichberger.org - Blog: 5ewl.blogspot.com - Genealogy:
genealogie.eichberger.org
Ahnenforschung Dauersuche: A(E)ichberger, B(P)ruckmayr in Ober sterreich
2013/2/2 Erik Olofsen <e.olofsen at xs4all.nl>:
Just to let you know that I started with a few lines on
http://rullf2.xs4all.nl:81/mediawiki/index.php/HECnet
Comments and topics are welcome (in contrast with a real Wiki,
mine is read-only at present).
--
Cory Smelosky
http://gewt.net/ Personal stuff!
http://gimme-sympathy.org/ My permanently-a-work-in-progress pet project.
