Will do. In a hospital in Beirut because of the fiancee so this is kinda low on my priority list lol :)
sampsa
On 22 Feb 2013, at 15:31, Saku Set l <setala at gmail.com> wrote:
(Going through my mail) Area 11 is fine too.
--Saku
On Tue, Jan 29, 2013 at 1:04 AM, <sampsa at mac.com> wrote:
Ok, areas 42 and 9 added.
sampsa
On 29 Jan 2013, at 00:58, Ian McLaughlin <ian at platinum.net> wrote:
Sampsa,
You can add area 42 - my log files can take it :) If polling machines that aren't always up is a problem, then BET:: is always up, and my main machine.
Ian
On 2013-01-28, at 2:54 PM, sampsa at mac.com wrote:
I found some DCL code on Deathrow's "Hack VMS FAQ" that outputs a nicely formatted listing of PHONE DIR.
So I took this code, ran it against a bunch of my hosts and ran it, and it works fine.
The output is in RHESUS::[.PHONEDIR]HECNETDIR.TXT
This service is opt-in: if you want you system listed in the phone directory, let me know and I'll add it to the script. Currently it only covers areas 8 and 47.
PS: Johnny, as we're not touching area 1, you shouldn't be getting those log messages I hope..
sampsa
---
Filter service subscribers can train this email as spam or not-spam here: http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=C4ACE860699D11E2A…
(Going through my mail) Area 11 is fine too.
--Saku
On Tue, Jan 29, 2013 at 1:04 AM, <sampsa at mac.com> wrote:
Ok, areas 42 and 9 added.
sampsa
On 29 Jan 2013, at 00:58, Ian McLaughlin <ian at platinum.net> wrote:
> Sampsa,
>
> You can add area 42 - my log files can take it :) If polling machines that aren't always up is a problem, then BET:: is always up, and my main machine.
>
> Ian
>
> On 2013-01-28, at 2:54 PM, sampsa at mac.com wrote:
>
>> I found some DCL code on Deathrow's "Hack VMS FAQ" that outputs a nicely formatted listing of PHONE DIR.
>>
>> So I took this code, ran it against a bunch of my hosts and ran it, and it works fine.
>>
>> The output is in RHESUS::[.PHONEDIR]HECNETDIR.TXT
>>
>> This service is opt-in: if you want you system listed in the phone directory, let me know and I'll add it to the script. Currently it only covers areas 8 and 47.
>>
>> PS: Johnny, as we're not touching area 1, you shouldn't be getting those log messages I hope..
>>
>>
>> sampsa
>>
>>
>>
>>
>>
>>
>>
>>
>> ---
>> Filter service subscribers can train this email as spam or not-spam here: http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=C4ACE860699D11E2A…
>
Rob,
Thanks! I've grabbed the file. The one on this machine has been heavily customized.
Ian
On 2013-02-20, at 3:38 PM, "Rob Jarratt" <robert.jarratt at ntlworld.com> wrote:
It is in vax780::systartup_v5.com
Regards
Rob
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE]
On Behalf Of Ian McLaughlin
Sent: 20 February 2013 23:14
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] announce.txt on VMS/VAX V5.4
Rob,
Do you know what file that logical is defined in? Can I have an original
copy
of that file?
On this machine, I have:
$ show logical sys$announce
"SYS$ANNOUNCE" = "@SYS$MANAGER:ANNOUNCE.TXT"
(LNM$SYSTEM_TABLE)
Ian
On 2013-02-20, at 3:04 PM, "Rob Jarratt" <robert.jarratt at ntlworld.com>
wrote:
On my 5.4 system I don't have an ANNOUNCE.TXT, but I have this:
$ sh log sys$announce
"SYS$ANNOUNCE" = ".Welcome to VAX/VMS V5.4 "
(LNM$SYSTEM_TABLE)
Regards
Rob
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-
hecnet at Update.UU.SE]
On Behalf Of Ian McLaughlin
Sent: 20 February 2013 22:42
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] announce.txt on VMS/VAX V5.4
No rush, but I would appreciate it when you have the opportunity. I
have
a
MicroVAX with 5.4 on it that I'd like to make more 'original'.
Ian
On 2013-02-20, at 2:39 PM, Cory Smelosky <b4 at gewt.net> wrote:
On 20 Feb 2013, at 17:22, Ian McLaughlin <ian at platinum.net> wrote:
Hello all,
Does anyone have an original copy of ANNOUNCE.TXT from VMS/VAX
V5.4 ?
I do.but I can't currently access it. It'll be a few days until I
can.
If there's
a rush I could always go install a copy.
Ian
---
Filter service subscribers can train this email as spam or not-spam
here:
http://my.email-as.net/spamham/cgi-
bin/learn.pl?messageid=6CC708B07BAE11E2BDC46D8193ED0201
---
Filter service subscribers can train this email as spam or not-spam
here:
http://my.email-as.net/spamham/cgi-
bin/learn.pl?messageid=F221B7D27BB111E2B62EBF8193ED0201
---
Filter service subscribers can train this email as spam or not-spam here: http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=A3238E267BB611E2B…
It is in vax780::systartup_v5.com
Regards
Rob
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE]
On Behalf Of Ian McLaughlin
Sent: 20 February 2013 23:14
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] announce.txt on VMS/VAX V5.4
Rob,
Do you know what file that logical is defined in? Can I have an original
copy
of that file?
On this machine, I have:
$ show logical sys$announce
"SYS$ANNOUNCE" = "@SYS$MANAGER:ANNOUNCE.TXT"
(LNM$SYSTEM_TABLE)
Ian
On 2013-02-20, at 3:04 PM, "Rob Jarratt" <robert.jarratt at ntlworld.com>
wrote:
On my 5.4 system I don't have an ANNOUNCE.TXT, but I have this:
$ sh log sys$announce
"SYS$ANNOUNCE" = ".Welcome to VAX/VMS V5.4 "
(LNM$SYSTEM_TABLE)
Regards
Rob
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-
hecnet at Update.UU.SE]
On Behalf Of Ian McLaughlin
Sent: 20 February 2013 22:42
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] announce.txt on VMS/VAX V5.4
No rush, but I would appreciate it when you have the opportunity. I
have
a
MicroVAX with 5.4 on it that I'd like to make more 'original'.
Ian
On 2013-02-20, at 2:39 PM, Cory Smelosky <b4 at gewt.net> wrote:
On 20 Feb 2013, at 17:22, Ian McLaughlin <ian at platinum.net> wrote:
Hello all,
Does anyone have an original copy of ANNOUNCE.TXT from VMS/VAX
V5.4 ?
I do.but I can't currently access it. It'll be a few days until I
can.
If there's
a rush I could always go install a copy.
Ian
---
Filter service subscribers can train this email as spam or not-spam
here:
http://my.email-as.net/spamham/cgi-
bin/learn.pl?messageid=6CC708B07BAE11E2BDC46D8193ED0201
---
Filter service subscribers can train this email as spam or not-spam
here:
http://my.email-as.net/spamham/cgi-
bin/learn.pl?messageid=F221B7D27BB111E2B62EBF8193ED0201
On 2/19/2013 10:40 AM, Dennis Boone wrote:
> Grab the file SG1::[DECNET]NU2.COM. Ignore the errors. It does depend
> on MIM being defined as 1.13. This procedure makes use of the file
> MIM::DU4:[DECNET]NODENAMES.DAT. Johnny creates this file for this
> procedure. I will not update your area nodes - that is your
> responsibility. It can be run interactively or via batch. It must be
> run from a priv'd account.
Steve,
Edumacation question. There are a number of places in NU2.COM where it
uses the switch /end_fo_file= [sic]
Unless I'm missing something "meta" about how this thing works, and
assuming it _does_ work, that succeeds in spite of the typo because...
...DCL only looks at the first 4?
De
Yes. The DCL parser will abbreviate any keyword to the shortest unique value. So the first 4 may well be enough to distinguish the /end_of_file qualifier from any other qualifier for the command. It will vary with the command.
John H. Reinhardt
On 20 Feb 2013, at 18:14, Ian McLaughlin <ian at platinum.net> wrote:
Rob,
Do you know what file that logical is defined in? Can I have an original copy of that file?
On this machine, I have:
$ show logical sys$announce
"SYS$ANNOUNCE" = "@SYS$MANAGER:ANNOUNCE.TXT" (LNM$SYSTEM_TABLE)
I believe it's defines in SYLOGICALS
Ian
On 2013-02-20, at 3:04 PM, "Rob Jarratt" <robert.jarratt at ntlworld.com> wrote:
On my 5.4 system I don't have an ANNOUNCE.TXT, but I have this:
$ sh log sys$announce
"SYS$ANNOUNCE" = ".Welcome to VAX/VMS V5.4 " (LNM$SYSTEM_TABLE)
Regards
Rob
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE]
On Behalf Of Ian McLaughlin
Sent: 20 February 2013 22:42
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] announce.txt on VMS/VAX V5.4
No rush, but I would appreciate it when you have the opportunity. I have
a
MicroVAX with 5.4 on it that I'd like to make more 'original'.
Ian
On 2013-02-20, at 2:39 PM, Cory Smelosky <b4 at gewt.net> wrote:
On 20 Feb 2013, at 17:22, Ian McLaughlin <ian at platinum.net> wrote:
Hello all,
Does anyone have an original copy of ANNOUNCE.TXT from VMS/VAX
V5.4 ?
I do.but I can't currently access it. It'll be a few days until I can.
If there's
a rush I could always go install a copy.
Ian
---
Filter service subscribers can train this email as spam or not-spam
here:
http://my.email-as.net/spamham/cgi-
bin/learn.pl?messageid=6CC708B07BAE11E2BDC46D8193ED0201
---
Filter service subscribers can train this email as spam or not-spam here: http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=F221B7D27BB111E2B…
Rob,
Do you know what file that logical is defined in? Can I have an original copy of that file?
On this machine, I have:
$ show logical sys$announce
"SYS$ANNOUNCE" = "@SYS$MANAGER:ANNOUNCE.TXT" (LNM$SYSTEM_TABLE)
Ian
On 2013-02-20, at 3:04 PM, "Rob Jarratt" <robert.jarratt at ntlworld.com> wrote:
On my 5.4 system I don't have an ANNOUNCE.TXT, but I have this:
$ sh log sys$announce
"SYS$ANNOUNCE" = ".Welcome to VAX/VMS V5.4 " (LNM$SYSTEM_TABLE)
Regards
Rob
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE]
On Behalf Of Ian McLaughlin
Sent: 20 February 2013 22:42
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] announce.txt on VMS/VAX V5.4
No rush, but I would appreciate it when you have the opportunity. I have
a
MicroVAX with 5.4 on it that I'd like to make more 'original'.
Ian
On 2013-02-20, at 2:39 PM, Cory Smelosky <b4 at gewt.net> wrote:
On 20 Feb 2013, at 17:22, Ian McLaughlin <ian at platinum.net> wrote:
Hello all,
Does anyone have an original copy of ANNOUNCE.TXT from VMS/VAX
V5.4 ?
I do.but I can't currently access it. It'll be a few days until I can.
If there's
a rush I could always go install a copy.
Ian
---
Filter service subscribers can train this email as spam or not-spam
here:
http://my.email-as.net/spamham/cgi-
bin/learn.pl?messageid=6CC708B07BAE11E2BDC46D8193ED0201
---
Filter service subscribers can train this email as spam or not-spam here: http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=F221B7D27BB111E2B…
On my 5.4 system I don't have an ANNOUNCE.TXT, but I have this:
$ sh log sys$announce
"SYS$ANNOUNCE" = ".Welcome to VAX/VMS V5.4 " (LNM$SYSTEM_TABLE)
Regards
Rob
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE]
On Behalf Of Ian McLaughlin
Sent: 20 February 2013 22:42
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] announce.txt on VMS/VAX V5.4
No rush, but I would appreciate it when you have the opportunity. I have
a
MicroVAX with 5.4 on it that I'd like to make more 'original'.
Ian
On 2013-02-20, at 2:39 PM, Cory Smelosky <b4 at gewt.net> wrote:
On 20 Feb 2013, at 17:22, Ian McLaughlin <ian at platinum.net> wrote:
Hello all,
Does anyone have an original copy of ANNOUNCE.TXT from VMS/VAX
V5.4 ?
I do.but I can't currently access it. It'll be a few days until I can.
If there's
a rush I could always go install a copy.
Ian
---
Filter service subscribers can train this email as spam or not-spam
here:
http://my.email-as.net/spamham/cgi-
bin/learn.pl?messageid=6CC708B07BAE11E2BDC46D8193ED0201
No rush, but I would appreciate it when you have the opportunity. I have a MicroVAX with 5.4 on it that I'd like to make more 'original'.
Ian
On 2013-02-20, at 2:39 PM, Cory Smelosky <b4 at gewt.net> wrote:
On 20 Feb 2013, at 17:22, Ian McLaughlin <ian at platinum.net> wrote:
Hello all,
Does anyone have an original copy of ANNOUNCE.TXT from VMS/VAX V5.4 ?
I do but I can't currently access it. It'll be a few days until I can. If there's a rush I could always go install a copy.
Ian
---
Filter service subscribers can train this email as spam or not-spam here: http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=6CC708B07BAE11E2B…
On 20 Feb 2013, at 17:22, Ian McLaughlin <ian at platinum.net> wrote:
Hello all,
Does anyone have an original copy of ANNOUNCE.TXT from VMS/VAX V5.4 ?
I do but I can't currently access it. It'll be a few days until I can. If there's a rush I could always go install a copy.
Ian
