I'll start!
Various such lists have been started over time, but I don't think anybody
was willing to maintain them.
I agree that it's hard to figure out routing issues when the network
topology is unknown! A nice HECnet map would be worth its weight in gold
about now.
Area: 2
Name: Bob Armstrong
Location: Milpitas, CA (Western US)
Router: LEGATO:: - connected via bridge and Multinet Tunnels
Bob
The Multinet license on SG1:: has expired. I tried to connect to
process.com to fix this but it keeps timing out. At the moment the only
thing running from this site is the bridge.
Stay tuned...
-Steve
In the meantime, maybe we could ask members to check-in with their area,
name, and location. That would help me figure out what is going on at
this end. It may help others as well.
Area 54 is located in Dublin, Ireland. Router is CEIRE connected via Multinet
tunnel. A second (Cisco) router A54RTR is connected via GRE tunnels. No bridge
connections here.
Everything looks ok from here now. I can reach area 7. Earlier, area 7 appeared
in the list of known networks here but I could not reach it. It appeared to me
that only GORVAX was advertising that it knew how to reach area 7 directly,
which was odd for an area connected via the bridge.
Regards,
Peter Coghlan.
Ian,
I would run either RSX-11M-PLUS or RSTS/E. I am running RSTS/E on one
machine, and if I can ever recover my RSX kit I will be running M+ on
the other machine.
-Steve
-----Original Message-----
From: owner-hecnet at Update.UU.SE
[mailto:owner-hecnet at Update.UU.SE] On Behalf Of Ian McLaughlin
Sent: Sunday, July 01, 2012 13:05
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] Area list
Area 42 is down at the moment - maybe up this weekend though
- I just acquired my first PDP11 so I'll be experimenting
with it this weekend (a long weekend in Canada).
Any suggestions on what to run on a PDP11/73?
Area 42 is in Kelowna, BC, Canada. The router is CANADA::
Ian
Sent from my iPad
On 2012-07-01, at 10:01 AM, "Steve Davidson" <jeep at scshome.net> wrote:
I have cleaned up (reduced) links on nodes SG1::, FRUGAL::, and
GORVAX::. Hopefully this will help out.
In the meantime, maybe we could ask members to check-in with their
area, name, and location. That would help me figure out
what is going
on at this end. It may help others as well.
I'll start!
Area: 19
Name: Steve Davidson
Location: Hollis, NH (Eastern US)
Router: SG1:: - connected via bridge and Multinet Tunnels
-Steve
-----Original Message-----
From: owner-hecnet at Update.UU.SE
[mailto:owner-hecnet at Update.UU.SE] On Behalf Of Johnny Billquist
Sent: Sunday, July 01, 2012 12:47
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] Area list
On 2012-07-01 18:16, Steve Davidson wrote:
Johnny,
Please send out the latest copy of the AREA list to the
reflector. It
would be nice to know what is real about areas, locations,
and "owner".
I have currently area 7 and 8 disabled on my bridge, just
FYI. Seems
to have at least stabilized things on my side.
Routing loops are bad. However, DECnet should normally be able to
resolve this, and get things right, as from a topology
point of view,
DECnet can have multiple paths between nodes. Something is wrong,
indeed...
The current list of the areas are on MIM::, which is shut
down at the
moment, because of the issues with the computer hall. I
hope to have
the machine back up and running soon...
Since GORVAX have an alternative connection, I'll keep it
off at my
end for now, for trouble shooting. As things looks stable
right now,
it will be interesting to turn area 7 back on and see what
happens.
Hold on to your hats...
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
---
Filter service subscribers can train this email as spam or
not-spam here:
http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=D090
1F40C39D11E18F2EF08E93ED0201
Area 42 is down at the moment - maybe up this weekend though - I just acquired my first PDP11 so I'll be experimenting with it this weekend (a long weekend in Canada).
Any suggestions on what to run on a PDP11/73?
Area 42 is in Kelowna, BC, Canada. The router is CANADA::
Ian
Sent from my iPad
On 2012-07-01, at 10:01 AM, "Steve Davidson" <jeep at scshome.net> wrote:
I have cleaned up (reduced) links on nodes SG1::, FRUGAL::, and
GORVAX::. Hopefully this will help out.
In the meantime, maybe we could ask members to check-in with their area,
name, and location. That would help me figure out what is going on at
this end. It may help others as well.
I'll start!
Area: 19
Name: Steve Davidson
Location: Hollis, NH (Eastern US)
Router: SG1:: - connected via bridge and Multinet Tunnels
-Steve
-----Original Message-----
From: owner-hecnet at Update.UU.SE
[mailto:owner-hecnet at Update.UU.SE] On Behalf Of Johnny Billquist
Sent: Sunday, July 01, 2012 12:47
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] Area list
On 2012-07-01 18:16, Steve Davidson wrote:
Johnny,
Please send out the latest copy of the AREA list to the
reflector. It
would be nice to know what is real about areas, locations,
and "owner".
I have currently area 7 and 8 disabled on my bridge, just
FYI. Seems to have at least stabilized things on my side.
Routing loops are bad. However, DECnet should normally be
able to resolve this, and get things right, as from a
topology point of view, DECnet can have multiple paths
between nodes. Something is wrong, indeed...
The current list of the areas are on MIM::, which is shut
down at the moment, because of the issues with the computer
hall. I hope to have the machine back up and running soon...
Since GORVAX have an alternative connection, I'll keep it off
at my end for now, for trouble shooting. As things looks
stable right now, it will be interesting to turn area 7 back
on and see what happens. Hold on to your hats...
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
---
Filter service subscribers can train this email as spam or not-spam here: http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=D0901F40C39D11E18…
I have cleaned up (reduced) links on nodes SG1::, FRUGAL::, and
GORVAX::. Hopefully this will help out.
In the meantime, maybe we could ask members to check-in with their area,
name, and location. That would help me figure out what is going on at
this end. It may help others as well.
I'll start!
Area: 19
Name: Steve Davidson
Location: Hollis, NH (Eastern US)
Router: SG1:: - connected via bridge and Multinet Tunnels
-Steve
-----Original Message-----
From: owner-hecnet at Update.UU.SE
[mailto:owner-hecnet at Update.UU.SE] On Behalf Of Johnny Billquist
Sent: Sunday, July 01, 2012 12:47
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] Area list
On 2012-07-01 18:16, Steve Davidson wrote:
Johnny,
Please send out the latest copy of the AREA list to the
reflector. It
would be nice to know what is real about areas, locations,
and "owner".
I have currently area 7 and 8 disabled on my bridge, just
FYI. Seems to have at least stabilized things on my side.
Routing loops are bad. However, DECnet should normally be
able to resolve this, and get things right, as from a
topology point of view, DECnet can have multiple paths
between nodes. Something is wrong, indeed...
The current list of the areas are on MIM::, which is shut
down at the moment, because of the issues with the computer
hall. I hope to have the machine back up and running soon...
Since GORVAX have an alternative connection, I'll keep it off
at my end for now, for trouble shooting. As things looks
stable right now, it will be interesting to turn area 7 back
on and see what happens. Hold on to your hats...
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
El 01/07/2012, a les 18:49, Jordi Guillaumes i Pons va escriure:
El 01/07/2012, a les 18:46, Johnny Billquist va escriure:
On 2012-07-01 18:16, Steve Davidson wrote:
Johnny,
Please send out the latest copy of the AREA list to the reflector. It
would be nice to know what is real about areas, locations, and "owner".
I have currently area 7 and 8 disabled on my bridge, just FYI. Seems to have at least stabilized things on my side.
At this moment my host computer seems to be back into the normal status. I've rebooted it and restarted all the VMS, CPU usage and routing information seems to be fine. You could try to reenable me as soon as you want.
The network looks normal from my side now:
sh net
VAX/VMS Network status for local node 7.61 BITXOO on 1-JUL-2012 18:46:42.43
Area Cost Hops Next Hop to Area
1 3 1 UNA-0 -> 1.15 PONDUS
2 3 1 UNA-0 -> 2.1 LEGATO
3 4 2 UNA-0 -> 19.41 SG1
7 0 0 (Local) -> 7.61 BITXOO
11 3 1 UNA-0 -> 11.1023 A11RTR
19 3 1 UNA-0 -> 19.41 SG1
33 4 2 UNA-0 -> 19.41 SG1
52 29 5 UNA-0 -> 2.1 LEGATO
54 5 2 UNA-0 -> 2.1 LEGATO
59 19 4 UNA-0 -> 2.1 LEGATO
62 3 1 UNA-0 -> 62.637 CTAKAH
Node Links Cost Hops Next Hop to Node
7.61 BITXOO 0 0 0 (Local) -> 7.61 BITXOO
7.6 MBSERV 0 3 1 UNA-0 -> 7.6 MBSERV
7.60 BITXOV 0 3 1 UNA-0 -> 7.60 BITXOV
7.63 BITXOS 0 3 1 UNA-0 -> 7.64 BITXO1
7.64 BITXO1 0 3 1 UNA-0 -> 7.64 BITXO1
7.65 BITXO2 0 3 1 UNA-0 -> 7.65 BITXO2
7.68 BITXO5 0 3 1 UNA-0 -> 7.68 BITXO5
7.71 BITXOR 0 3 1 UNA-0 -> 7.71 BITXOR
7.78 BITXT2 0 3 1 UNA-0 -> 7.78 BITXT2
BTW, all my "iron" vaxen which are in working condition are now online :) I'll keep the big ones (well, "sorta" big) up for some hours, just to hear them humming...
Jordi Guillaumes i Pons
jg at jordi.guillaumes.name
HECnet: BITXOV::JGUILLAUMES
El 01/07/2012, a les 18:46, Johnny Billquist va escriure:
On 2012-07-01 18:16, Steve Davidson wrote:
Johnny,
Please send out the latest copy of the AREA list to the reflector. It
would be nice to know what is real about areas, locations, and "owner".
I have currently area 7 and 8 disabled on my bridge, just FYI. Seems to have at least stabilized things on my side.
At this moment my host computer seems to be back into the normal status. I've rebooted it and restarted all the VMS, CPU usage and routing information seems to be fine. You could try to reenable me as soon as you want.
Jordi Guillaumes i Pons
jg at jordi.guillaumes.name
HECnet: BITXOV::JGUILLAUMES
On 2012-07-01 18:16, Steve Davidson wrote:
Johnny,
Please send out the latest copy of the AREA list to the reflector. It
would be nice to know what is real about areas, locations, and "owner".
I have currently area 7 and 8 disabled on my bridge, just FYI. Seems to have at least stabilized things on my side.
Routing loops are bad. However, DECnet should normally be able to resolve this, and get things right, as from a topology point of view, DECnet can have multiple paths between nodes. Something is wrong, indeed...
The current list of the areas are on MIM::, which is shut down at the moment, because of the issues with the computer hall. I hope to have the machine back up and running soon...
Since GORVAX have an alternative connection, I'll keep it off at my end for now, for trouble shooting. As things looks stable right now, it will be interesting to turn area 7 back on and see what happens. Hold on to your hats...
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
Johnny,
Please send out the latest copy of the AREA list to the reflector. It
would be nice to know what is real about areas, locations, and "owner".
Thanks!
-Steve
