No this is correct. What kind of hardware and os?
Is it on-line at Hecnet?
-----Original Message-----
From: Cory Smelosky <b4 at gewt.net>
Sender: owner-hecnet at Update.UU.SE
Date: Fri, 28 Dec 2012 15:34:36
To: <hecnet at Update.UU.SE>
Reply-To: hecnet at Update.UU.SE
Subject: Re: [HECnet] SIMH + Multiple interfaces + DECnet
On 28 Dec 2012, at 15:33, hvlems at zonnet.nl wrote:
The system is configured as a router?
Routing version = V2.0.0
Type = routing IV
Should it be a different type?
------Origineel bericht------
Van: Cory Smelosky
Afzender: owner-hecnet at Update.UU.SE
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: [HECnet] SIMH + Multiple interfaces + DECnet
Verzonden: 28 december 2012 21:00
Hello!
%NCP-W-OPEFAI, Operation failure
%SYSTEM-F-IVADDR, invalid media address
%NCP-W-UNRCMP, Unrecognized component , Circuit
Circuit = QNA-1
However:
XQ, address=20001920-2000192F*, vector=250, MAC=AA:00:04:00:15:24, type=DELQA-T, poll=100, attached to em0
XQB, address=20001930-2000193F*, vector=2E0, MAC=AA:00:04:00:15:24, type=DELQA-T, poll=100, attached to tap0
QNA-0 comes up fine.
Anything special I need to do? I NEED to be using two NICs and two circuits for this.
--
Cory Smelosky
http://gewt.net/ Personal stuff!
http://gimme-sympathy.org/ My permanently-a-work-in-progress pet project.
--
Cory Smelosky
http://gewt.net/ Personal stuff!
http://gimme-sympathy.org/ My permanently-a-work-in-progress pet project.
On 28 Dec 2012, at 15:33, hvlems at zonnet.nl wrote:
The system is configured as a router?
Routing version = V2.0.0
Type = routing IV
Should it be a different type?
------Origineel bericht------
Van: Cory Smelosky
Afzender: owner-hecnet at Update.UU.SE
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: [HECnet] SIMH + Multiple interfaces + DECnet
Verzonden: 28 december 2012 21:00
Hello!
%NCP-W-OPEFAI, Operation failure
%SYSTEM-F-IVADDR, invalid media address
%NCP-W-UNRCMP, Unrecognized component , Circuit
Circuit = QNA-1
However:
XQ, address=20001920-2000192F*, vector=250, MAC=AA:00:04:00:15:24, type=DELQA-T, poll=100, attached to em0
XQB, address=20001930-2000193F*, vector=2E0, MAC=AA:00:04:00:15:24, type=DELQA-T, poll=100, attached to tap0
QNA-0 comes up fine.
Anything special I need to do? I NEED to be using two NICs and two circuits for this.
--
Cory Smelosky
http://gewt.net/ Personal stuff!
http://gimme-sympathy.org/ My permanently-a-work-in-progress pet project.
--
Cory Smelosky
http://gewt.net/ Personal stuff!
http://gimme-sympathy.org/ My permanently-a-work-in-progress pet project.
The system is configured as a router?
------Origineel bericht------
Van: Cory Smelosky
Afzender: owner-hecnet at Update.UU.SE
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: [HECnet] SIMH + Multiple interfaces + DECnet
Verzonden: 28 december 2012 21:00
Hello!
%NCP-W-OPEFAI, Operation failure
%SYSTEM-F-IVADDR, invalid media address
%NCP-W-UNRCMP, Unrecognized component , Circuit
Circuit = QNA-1
However:
XQ, address=20001920-2000192F*, vector=250, MAC=AA:00:04:00:15:24, type=DELQA-T, poll=100, attached to em0
XQB, address=20001930-2000193F*, vector=2E0, MAC=AA:00:04:00:15:24, type=DELQA-T, poll=100, attached to tap0
QNA-0 comes up fine.
Anything special I need to do? I NEED to be using two NICs and two circuits for this.
--
Cory Smelosky
http://gewt.net/ Personal stuff!
http://gimme-sympathy.org/ My permanently-a-work-in-progress pet project.
That's siikax::mod*.a
Sorry.
On 28 Dec 2012, at 22:20, sampsa at mac.com wrote:
Try copying them from siika::mod*.a
Sampsa Laine
sampsa at mac.com
On 28 Dec 2012, at 21:49, Mark Wickens <mark at wickensonline.co.uk> wrote:
<ccaebdii.png>
Boo!
Try copying them from siika::mod*.a
Sampsa Laine
sampsa at mac.com
On 28 Dec 2012, at 21:49, Mark Wickens <mark at wickensonline.co.uk> wrote:
<ccaebdii.png>
Boo!
Hello!
%NCP-W-OPEFAI, Operation failure
%SYSTEM-F-IVADDR, invalid media address
%NCP-W-UNRCMP, Unrecognized component , Circuit
Circuit = QNA-1
However:
XQ, address=20001920-2000192F*, vector=250, MAC=AA:00:04:00:15:24, type=DELQA-T, poll=100, attached to em0
XQB, address=20001930-2000193F*, vector=2E0, MAC=AA:00:04:00:15:24, type=DELQA-T, poll=100, attached to tap0
QNA-0 comes up fine.
Anything special I need to do? I NEED to be using two NICs and two circuits for this.
--
Cory Smelosky
http://gewt.net/ Personal stuff!
http://gimme-sympathy.org/ My permanently-a-work-in-progress pet project.
On 12/28/2012 10:00 AM, Bob Armstrong wrote:
Ok, I made it easy for you guys. First, remember, this ONLY RUNS ON A
VAX! No Alphas, no IA64s. Sorry. You guys just go home...
I grabbed this too; thank you!
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On 12/28/2012 09:08 AM, Bob Armstrong wrote:
just create the backup on an Alpha?
Yes, the backup was created on an Alpha, but the compiler code generation
is for VAX only. This dates to, maybe, 1983 or so - MicroVAX-Is were still
cool back then and Alphas didn't exist.
Hey, MicroVAX-Is are STILL cool! ;)
Just...not very fast.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On 28 Dec 2012, at 17:00, Bob Armstrong <bob at jfcl.com> wrote:
Brian Schenkenberger, VAXman- wrote:
Catch-22!
Ok, I made it easy for you guys. First, remember, this ONLY RUNS ON A
VAX! No Alphas, no IA64s. Sorry. You guys just go home...
OK, that was easy :)
Installed on HILANT:: now.
Ok, it's installed.
To compile something, e.g. the pretty formatter example from the M2
utilities -
$ DEFINE MOD$LIBRARY SYS$SYSROOT:[SYSLIB.MODULA]
$ MODULA PRETTY
$ LINK PRETTY,SYS$LIBRARY:MODULA/LIBRARY
I made a .COM file to do that, i.e.:
$! MOD2.COM - Compiles a Modula-2 file
$ DEFINE MOD$LIBRARY SYS$SYSROOT:[SYSLIB.MODULA]
$ MODULA 'P1'
$ LINK 'P1',SYS$LIBRARY:MODULA/LIBRARY
And then a symbol pointing at it.
But that's just how I roll.
sampsa
