HECnet August 2011

hecnet@lists.dfupdate.se

18 participants
113 discussions

Downloading software to a DECSERVER 200 over MOP?

by uusimaki＠exdecfinland.org

Sorry, the file protection was too restrictive. It's fixed now. Kari On 14.8.2011 16:28, Kari Uusim ki wrote: Yes, that's it. Kari On 14.8.2011 16:24, Sampsa Laine wrote: Ah and now I just need to copy the file from Kari's box? Sampsa On 14 Aug 2011, at 14:21, Kari Uusim ki wrote: Well, first you enable downline loading on your Ethernet adapter (EWA0 or which one you have on your machine) with LANCP. LANCP> SET DEVICE EWA0 /DLL=ENABLE Then you define your DECSERVER, its MAC address (which is written on a label on the DECSERVER) and the needed image in LANCP so that it can respond to the downline loading requests received from your DECSERVER. LANCP> DEFINE NODE DS200/ADDRESS=08-00-2B-11-22-33 /FILE=PR0801ENG.SYS Then you just power on your DECSERVER and wait a few minutes that it has done all selftests and downloaded the image. You can follow the downline loading on your Alpha console. Was the explanation understandable? Kari On 14.8.2011 16:05, Sampsa Laine wrote: I did not really understand any of that :) On 14 Aug 2011, at 14:00, Kari Uusim ki wrote: On 14.8.2011 15:15, Sampsa Laine wrote: Guys, Back for ages my DECSERVER used to boot up using someone's MOP box in Sweden I believe; This is no longer the case, and this being my only console access to RHESUS i would appreciate some instructions on how to set up this soft-downline-loading setup (and possibly the necessary binaries). Sampsa . Assuming you are using Alpha and VMS V7.3 or newer. $ MC LANCP LANCP> SET DEVICE EWA0 /DLL=ENABLE LANCP> DEFINE NODE DS200/ADDRESS=08-00-2B-11-22-33 /FILE=PR0801ENG.SYS LANCP> EXIT Copy the PR0801ENG.SYS image using the qualifier /continuous to the directory MOM$SYSTEM. You'll find the image using anonymous ftp at juhani.exdecfinlnd.org Kari . . .

12 years, 9 months

Downloading software to a DECSERVER 200 over MOP?

by uusimaki＠exdecfinland.org

The commands in NCP would be almost the same. The first one NCP> SET CIRC ESA-0 SERVI ENAB and the second one NCP> DEFI NODE X.X NAME DS200 LOAD FILE PR0801ENG.SYS SERVICE CIRCUIT ESA-0 Where the x.x is some DECnet address in your area which is not used. This might not be 100% correct because I use DECnet Phase IV seldom nowadays. Kari On 14.8.2011 16:21, Kari Uusim ki wrote: Well, first you enable downline loading on your Ethernet adapter (EWA0 or which one you have on your machine) with LANCP. LANCP> SET DEVICE EWA0 /DLL=ENABLE Then you define your DECSERVER, its MAC address (which is written on a label on the DECSERVER) and the needed image in LANCP so that it can respond to the downline loading requests received from your DECSERVER. LANCP> DEFINE NODE DS200/ADDRESS=08-00-2B-11-22-33 /FILE=PR0801ENG.SYS Then you just power on your DECSERVER and wait a few minutes that it has done all selftests and downloaded the image. You can follow the downline loading on your Alpha console. Was the explanation understandable? Kari On 14.8.2011 16:05, Sampsa Laine wrote: I did not really understand any of that :) On 14 Aug 2011, at 14:00, Kari Uusim ki wrote: On 14.8.2011 15:15, Sampsa Laine wrote: Guys, Back for ages my DECSERVER used to boot up using someone's MOP box in Sweden I believe; This is no longer the case, and this being my only console access to RHESUS i would appreciate some instructions on how to set up this soft-downline-loading setup (and possibly the necessary binaries). Sampsa . Assuming you are using Alpha and VMS V7.3 or newer. $ MC LANCP LANCP> SET DEVICE EWA0 /DLL=ENABLE LANCP> DEFINE NODE DS200/ADDRESS=08-00-2B-11-22-33 /FILE=PR0801ENG.SYS LANCP> EXIT Copy the PR0801ENG.SYS image using the qualifier /continuous to the directory MOM$SYSTEM. You'll find the image using anonymous ftp at juhani.exdecfinlnd.org Kari . .

12 years, 9 months

Downloading software to a DECSERVER 200 over MOP?

by hvlems＠zonnet.nl

Hecnet address is 44.38 Simh is no problem Verzonden vanaf mijn draadloze BlackBerry -toestel -----Original Message----- From: Sampsa Laine <sampsa at mac.com> Sender: owner-hecnet at Update.UU.SE Date: Sun, 14 Aug 2011 14:28:16 To: <hecnet at Update.UU.SE> Reply-To: hecnet at Update.UU.SESubject: Re: [HECnet] Downloading software to a DECSERVER 200 over MOP? Actually GORVAX is a SIMH VAX on 7.3. Also, what;s you HECnet address? Samlsa On 14 Aug 2011, at 14:00, Kari Uusim ki wrote: On 14.8.2011 15:15, Sampsa Laine wrote: Guys, Back for ages my DECSERVER used to boot up using someone's MOP box in Sweden I believe; This is no longer the case, and this being my only console access to RHESUS i would appreciate some instructions on how to set up this soft-downline-loading setup (and possibly the necessary binaries). Sampsa . Assuming you are using Alpha and VMS V7.3 or newer. $ MC LANCP LANCP> SET DEVICE EWA0 /DLL=ENABLE LANCP> DEFINE NODE DS200/ADDRESS=08-00-2B-11-22-33 /FILE=PR0801ENG.SYS LANCP> EXIT Copy the PR0801ENG.SYS image using the qualifier /continuous to the directory MOM$SYSTEM. You'll find the image using anonymous ftp at juhani.exdecfinlnd.org Kari

12 years, 9 months

Downloading software to a DECSERVER 200 over MOP?

by uusimaki＠exdecfinland.org

Yes, that's it. Kari On 14.8.2011 16:24, Sampsa Laine wrote: Ah and now I just need to copy the file from Kari's box? Sampsa On 14 Aug 2011, at 14:21, Kari Uusim ki wrote: Well, first you enable downline loading on your Ethernet adapter (EWA0 or which one you have on your machine) with LANCP. LANCP> SET DEVICE EWA0 /DLL=ENABLE Then you define your DECSERVER, its MAC address (which is written on a label on the DECSERVER) and the needed image in LANCP so that it can respond to the downline loading requests received from your DECSERVER. LANCP> DEFINE NODE DS200/ADDRESS=08-00-2B-11-22-33 /FILE=PR0801ENG.SYS Then you just power on your DECSERVER and wait a few minutes that it has done all selftests and downloaded the image. You can follow the downline loading on your Alpha console. Was the explanation understandable? Kari On 14.8.2011 16:05, Sampsa Laine wrote: I did not really understand any of that :) On 14 Aug 2011, at 14:00, Kari Uusim ki wrote: On 14.8.2011 15:15, Sampsa Laine wrote: Guys, Back for ages my DECSERVER used to boot up using someone's MOP box in Sweden I believe; This is no longer the case, and this being my only console access to RHESUS i would appreciate some instructions on how to set up this soft-downline-loading setup (and possibly the necessary binaries). Sampsa . Assuming you are using Alpha and VMS V7.3 or newer. $ MC LANCP LANCP> SET DEVICE EWA0 /DLL=ENABLE LANCP> DEFINE NODE DS200/ADDRESS=08-00-2B-11-22-33 /FILE=PR0801ENG.SYS LANCP> EXIT Copy the PR0801ENG.SYS image using the qualifier /continuous to the directory MOM$SYSTEM. You'll find the image using anonymous ftp at juhani.exdecfinlnd.org Kari . .

12 years, 9 months

Downloading software to a DECSERVER 200 over MOP?

by sampsa＠mac.com

Actually GORVAX is a SIMH VAX on 7.3. Also, what;s you HECnet address? Samlsa On 14 Aug 2011, at 14:00, Kari Uusim ki wrote: On 14.8.2011 15:15, Sampsa Laine wrote: Guys, Back for ages my DECSERVER used to boot up using someone's MOP box in Sweden I believe; This is no longer the case, and this being my only console access to RHESUS i would appreciate some instructions on how to set up this soft-downline-loading setup (and possibly the necessary binaries). Sampsa . Assuming you are using Alpha and VMS V7.3 or newer. $ MC LANCP LANCP> SET DEVICE EWA0 /DLL=ENABLE LANCP> DEFINE NODE DS200/ADDRESS=08-00-2B-11-22-33 /FILE=PR0801ENG.SYS LANCP> EXIT Copy the PR0801ENG.SYS image using the qualifier /continuous to the directory MOM$SYSTEM. You'll find the image using anonymous ftp at juhani.exdecfinlnd.org Kari

12 years, 9 months

Downloading software to a DECSERVER 200 over MOP?

by hvlems＠zonnet.nl

Ok, log on to node CESIUM, user Hecnet passw is gast (case insensitive). In the logon dir you'll find p*.sys files, one for the DS100 and the other is for the DS200. The file MOPNCP.TXT tells you how to configure a DECnet load host PHONE SYSTEM for on line help Hans Verzonden vanaf mijn draadloze BlackBerry -toestel -----Original Message----- From: Sampsa Laine <sampsa at mac.com> Sender: owner-hecnet at Update.UU.SE Date: Sun, 14 Aug 2011 14:05:39 To: <hecnet at Update.UU.SE> Reply-To: hecnet at Update.UU.SESubject: Re: [HECnet] Downloading software to a DECSERVER 200 over MOP? I did not really understand any of that :) On 14 Aug 2011, at 14:00, Kari Uusim ki wrote: On 14.8.2011 15:15, Sampsa Laine wrote: Guys, Back for ages my DECSERVER used to boot up using someone's MOP box in Sweden I believe; This is no longer the case, and this being my only console access to RHESUS i would appreciate some instructions on how to set up this soft-downline-loading setup (and possibly the necessary binaries). Sampsa . Assuming you are using Alpha and VMS V7.3 or newer. $ MC LANCP LANCP> SET DEVICE EWA0 /DLL=ENABLE LANCP> DEFINE NODE DS200/ADDRESS=08-00-2B-11-22-33 /FILE=PR0801ENG.SYS LANCP> EXIT Copy the PR0801ENG.SYS image using the qualifier /continuous to the directory MOM$SYSTEM. You'll find the image using anonymous ftp at juhani.exdecfinlnd.org Kari

12 years, 9 months

Downloading software to a DECSERVER 200 over MOP?

by sampsa＠mac.com

Ah and now I just need to copy the file from Kari's box? Sampsa On 14 Aug 2011, at 14:21, Kari Uusim ki wrote: Well, first you enable downline loading on your Ethernet adapter (EWA0 or which one you have on your machine) with LANCP. LANCP> SET DEVICE EWA0 /DLL=ENABLE Then you define your DECSERVER, its MAC address (which is written on a label on the DECSERVER) and the needed image in LANCP so that it can respond to the downline loading requests received from your DECSERVER. LANCP> DEFINE NODE DS200/ADDRESS=08-00-2B-11-22-33 /FILE=PR0801ENG.SYS Then you just power on your DECSERVER and wait a few minutes that it has done all selftests and downloaded the image. You can follow the downline loading on your Alpha console. Was the explanation understandable? Kari On 14.8.2011 16:05, Sampsa Laine wrote: I did not really understand any of that :) On 14 Aug 2011, at 14:00, Kari Uusim ki wrote: On 14.8.2011 15:15, Sampsa Laine wrote: Guys, Back for ages my DECSERVER used to boot up using someone's MOP box in Sweden I believe; This is no longer the case, and this being my only console access to RHESUS i would appreciate some instructions on how to set up this soft-downline-loading setup (and possibly the necessary binaries). Sampsa . Assuming you are using Alpha and VMS V7.3 or newer. $ MC LANCP LANCP> SET DEVICE EWA0 /DLL=ENABLE LANCP> DEFINE NODE DS200/ADDRESS=08-00-2B-11-22-33 /FILE=PR0801ENG.SYS LANCP> EXIT Copy the PR0801ENG.SYS image using the qualifier /continuous to the directory MOM$SYSTEM. You'll find the image using anonymous ftp at juhani.exdecfinlnd.org Kari .

12 years, 9 months

Downloading software to a DECSERVER 200 over MOP?

by uusimaki＠exdecfinland.org

Well, first you enable downline loading on your Ethernet adapter (EWA0 or which one you have on your machine) with LANCP. LANCP> SET DEVICE EWA0 /DLL=ENABLE Then you define your DECSERVER, its MAC address (which is written on a label on the DECSERVER) and the needed image in LANCP so that it can respond to the downline loading requests received from your DECSERVER. LANCP> DEFINE NODE DS200/ADDRESS=08-00-2B-11-22-33 /FILE=PR0801ENG.SYS Then you just power on your DECSERVER and wait a few minutes that it has done all selftests and downloaded the image. You can follow the downline loading on your Alpha console. Was the explanation understandable? Kari On 14.8.2011 16:05, Sampsa Laine wrote: I did not really understand any of that :) On 14 Aug 2011, at 14:00, Kari Uusim ki wrote: On 14.8.2011 15:15, Sampsa Laine wrote: Guys, Back for ages my DECSERVER used to boot up using someone's MOP box in Sweden I believe; This is no longer the case, and this being my only console access to RHESUS i would appreciate some instructions on how to set up this soft-downline-loading setup (and possibly the necessary binaries). Sampsa . Assuming you are using Alpha and VMS V7.3 or newer. $ MC LANCP LANCP> SET DEVICE EWA0 /DLL=ENABLE LANCP> DEFINE NODE DS200/ADDRESS=08-00-2B-11-22-33 /FILE=PR0801ENG.SYS LANCP> EXIT Copy the PR0801ENG.SYS image using the qualifier /continuous to the directory MOM$SYSTEM. You'll find the image using anonymous ftp at juhani.exdecfinlnd.org Kari .

12 years, 9 months

Downloading software to a DECSERVER 200 over MOP?

by sampsa＠mac.com

I did not really understand any of that :) On 14 Aug 2011, at 14:00, Kari Uusim ki wrote: On 14.8.2011 15:15, Sampsa Laine wrote: Guys, Back for ages my DECSERVER used to boot up using someone's MOP box in Sweden I believe; This is no longer the case, and this being my only console access to RHESUS i would appreciate some instructions on how to set up this soft-downline-loading setup (and possibly the necessary binaries). Sampsa . Assuming you are using Alpha and VMS V7.3 or newer. $ MC LANCP LANCP> SET DEVICE EWA0 /DLL=ENABLE LANCP> DEFINE NODE DS200/ADDRESS=08-00-2B-11-22-33 /FILE=PR0801ENG.SYS LANCP> EXIT Copy the PR0801ENG.SYS image using the qualifier /continuous to the directory MOM$SYSTEM. You'll find the image using anonymous ftp at juhani.exdecfinlnd.org Kari

12 years, 9 months

Downloading software to a DECSERVER 200 over MOP?

by uusimaki＠exdecfinland.org

On 14.8.2011 15:15, Sampsa Laine wrote: Guys, Back for ages my DECSERVER used to boot up using someone's MOP box in Sweden I believe; This is no longer the case, and this being my only console access to RHESUS i would appreciate some instructions on how to set up this soft-downline-loading setup (and possibly the necessary binaries). Sampsa . Assuming you are using Alpha and VMS V7.3 or newer. $ MC LANCP LANCP> SET DEVICE EWA0 /DLL=ENABLE LANCP> DEFINE NODE DS200/ADDRESS=08-00-2B-11-22-33 /FILE=PR0801ENG.SYS LANCP> EXIT Copy the PR0801ENG.SYS image using the qualifier /continuous to the directory MOM$SYSTEM. You'll find the image using anonymous ftp at juhani.exdecfinlnd.org Kari

12 years, 9 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

HECnet August 2011