On 4 Nov 2009, at 00:16, Gregg Levine wrote:
Hello!
I live in a typical NYC apartment where the power costs (including
fuel gas for cooking) are bundled into the rent so they never tell me
the rates.
That's a great arrangement - what are the broadband options like - how much can you get up/down?
Sampsa
On Tue, Nov 3, 2009 at 6:54 PM, Phil Mendelsohn <phil at rephil.org> wrote:
Bob Armstrong wrote:
CODA is getting an early retirement. It's a very nice machine (a DS20E)
but it uses nearly 500W and with the marginal electricity rate here in CA
at
something like 38 cents/kWh
Here's a comparison you won't enjoy:
Manitoba (Canada) has an electric rate of about $0.06 / kWh, and something
like 99% hydro power. (I think there's one coal plant in the province.)
But you have to put up with mosquitoes in the summer and -40 (C/F - doesn't
matter) in the winter to get those rates...
Phil
--
"Nothing is too small to know, and nothing too big to attempt."
--Sir William Cornelius Van Horne
Hello!
I live in a typical NYC apartment where the power costs (including
fuel gas for cooking) are bundled into the rent so they never tell me
the rates.
But the last time I check on the ConEd rates here they were on a par
with both places. And sometimes they were so low the utility needed to
bundle the power (electric) rates with steam and gas to convince us to
believe them. Remember in NYC as well as in some parts of Westchester
CO, Con Ed supplies both gas and electricity, and steam plus the other
two in Manhattan.
So Bob what are you planning on doing with the retiring Alpha system?
How big is he, and so forth.
-----
Gregg C Levine gregg.drwho8 at gmail.com
"This signature was once found posting rude
messages in English in the Moscow subway."
Bob Armstrong wrote:
CODA is getting an early retirement. It's a very nice machine (a DS20E)
but it uses nearly 500W and with the marginal electricity rate here in CA at
something like 38 cents/kWh
Here's a comparison you won't enjoy:
Manitoba (Canada) has an electric rate of about $0.06 / kWh, and something like 99% hydro power. (I think there's one coal plant in the province.)
But you have to put up with mosquitoes in the summer and -40 (C/F - doesn't matter) in the winter to get those rates...
Phil
--
"Nothing is too small to know, and nothing too big to attempt."
--Sir William Cornelius Van Horne
I live in London, but this weekend will probably the first weekend
this year I won't be here.
Dan
2009/11/3 Sampsa Laine <sampsa at mac.com>:
Guys,
If you're in or around London this weekend, let me know - I'm throwing a "92
Years Since The October Revolution" themed house party. Why? Why the hell
not.
Sampsa
Christine,
Terribly sorry about this, but turns out the guy I'm meant to drive down from Leeds can't make it this week - how is next week looking for you?
Sampsa
On 27 Oct 2009, at 15:37, Christine Caulfield wrote:
Oh god, my boiler is the same.
It used to crash every two or three weeks. And the plumber told me how to refill it and reset it. In the end it turned out to be a very slightly leaky radiator and it's been fine after that. I'm still supposed to check the pressure now and then though.
/me goes off to do it while she remembers.
Chrissie
On 27/10/09 15:30, Sampsa Laine wrote:
OK, cool, we'll synchronise schedules with my friend, probably come up
on Wednesday or Friday (Wed ideally, I'm thinking the traffic into
London on Friday might be a lot of Epic Phail).
As for the boiler repair, it was free - only had it installed a few
months back (behind my spare freezer, which isn't so great). Turns out
it just needed a top-up - this involved the guy fiddling with two dials.
Now the stupid thing cost me thousands AND has a computer already built
in, how freaking hard can it be to make the topping-up thing automatic.
Sampsa
On 27 Oct 2009, at 15:27, Christine Caulfield wrote:
Ahhh No problem.
That week is fine apart from Monday and Thursday.
I hope the boiler doesn't cost too much to fix :S
Chrissie
On 27/10/09 15:09, Sampsa Laine wrote:
Oh crap, so it was - I ACTUALLY mean the week commencing the 9th - sorry
about the confusion, been dealing with boiler repair guys all day.
Sampsa
On 27 Oct 2009, at 14:27, Christine Caulfield wrote:
Hiya
That's the week I thought you meant anyway! So that's fine.
My address is
39 St James Terrace
Horsforth
Leeds
LS18 5QT
Phone 0113 2288310
Chrissie
On 27/10/09 14:01, Sampsa Laine wrote:
Actually, if you can hold on to them for another week - i.e. the week
commencing 2 Nov, I'd be able to synchronise giving my friend a
lift to
London with the pick up. If this is a problem, no worries, I'll
come up
on next Thursday.
sampsa
On 27 Oct 2009, at 13:50, Christine Caulfield wrote:
On 27/10/09 12:41, Sampsa Laine wrote:
I'll take the VAXstation and Alpha PWS if you can spare them and
the CD
drives - as for pick up, well I'm between jobs so it's no biggie,
could
come up next week if that works for you.
Yes, that's fine. I work from home so most days during the daytime
will be OK, apart from Wednesday morning. Just give me a day or so's
notice when you'll be here and I'll be ready.
Chrissie
Guys,
If you're in or around London this weekend, let me know - I'm throwing a "92 Years Since The October Revolution" themed house party. Why? Why the hell not.
Sampsa
CODA is getting an early retirement. It's a very nice machine (a DS20E)
but it uses nearly 500W and with the marginal electricity rate here in CA at
something like 38 cents/kWh that's about $140 per month to keep it running
24x7. That's just too much, and I'm replacing it with a Charon-AXP-nce
emulation on a Linux box; it's the same Linux box we use for our MythTV
backend so it's already running 24x7 anyway. The Charon emulation is only
about half the speed of the original DS20 (the CPU emulation is not bad, but
the emulated I/O performance seems crappy when compared with the real
hardware) so it'll be an experiment to see if it can keep up.
The only real difference to HECnet is that people with Multinet
connections to me will see that they're now terminated by 2.17 CHARON rather
than 2.7 CODA.
Johnny, please add 2.17 CHARON to the node database on MIM.
Thanks,
Bob
If I don't select DECwindows Motif, then OpenVMS installs just fine. I guess there may be something wrong with the Motif PCSI package. Fortunately, I have no need for it to be installed, so I'll redo the installation without it and get a clean install going.
I've succesfully installed ovms 8.3 w/ DECwindows Motif from two different ISO images.
All works fine for me.
I ran into some strange problems with my Alpha CD. I was told that there were "bad blocks" found in the PCSI database during verification. The machine came up, so it appears to be okay, but I don't know that my installation completed successfully. I tried reimaging the CD I have into fresh ISOs, but they all come out the same.
For anyone who is curious how this ended up, I looked at Bob's image, and it was identical to mine, same size and same checksum.
I did some reinstallation attempts and finally tracked down the problem to trying to install DECwindows Motif. If I selected that package (not just the libraries, but the actual server component), I get this error during installation:
Portion done: 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%
%PCSI-E-PDBFAILVAL, the product database failed verification due to an internal inconsistency
%PCSI-E-PDBFILERR, file PCSI$UPDATE_8.PCSI$DATABASE;1 failed with the following error:
-LIB-F-BADBLOSIZ, bad block size
%PCSI-E-PDBFAILVAL, the product database failed verification due to an internal inconsistency
%PCSI-E-S_OPFAIL, operation failed
%PCSIUI-E-ABORT, operation terminated due to an unrecoverable error condition
If I don't select DECwindows Motif, then OpenVMS installs just fine. I guess there may be something wrong with the Motif PCSI package. Fortunately, I have no need for it to be installed, so I'll redo the installation without it and get a clean install going.
--Marc
I'm running ovms 8.3 w/ DECnet & TCP/IP under charon-nce.
eth0 used by host OS, eth1 used by emulator (no entry for eth1 in
`intefaces' file), both connected to the same switch.
Thanks, Oleg - that's basically the same setup I've got (except for the
interfaces file).
Gotta go now, but I'll fool with this some more tonight.
Bob
