Nm.. found it. Sorry. Seems to be case sensitive.

Al. -----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Boyanich, Alastair Sent: Monday, 18 September 2017 10:02 AM To: hecnet at Update.UU.SE Subject: RE: [HECnet] Announcing TCP/IP for RSX-11M-PLUS Hi Johnny, Is the .tap available? I find this the easiest to get across to the 11/83 from the vax with the tape drive. Best Wishes, Al -----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Johnny Billquist Sent: Sunday, 3 September 2017 8:32 PM To: hecnet at Update.UU.SE; Info-PDP11 at dbit.com; SIMH <simh at trailing-edge.com> Subject: [HECnet] Announcing TCP/IP for RSX-11M-PLUS Time for a new release announcement of TCP/IP for RSX-11M-PLUS. This release contains a lot of fixes and improvements in many areas. I really encourage people to upgrade, as some of these changes can have a noticeable impact on stability. Highlights: - Distribution now includes the PDP-11 C and BASIC+2 resident libraries, so that various tools and utilities that are built against them can be installed even if the full language is not installed on a system. - Improved stability. Detailed information on things that have been done since the last release: Ethernet driver: - The ethernet driver could under some overload situations become deaf, and not receive any more packets. TCP: - TCP FIN handling. Under some circumstances, TCP could get into a state where both sides would be sending FIN packets, and not acknowledging the other sides FIN. - TCP sequence handling. Under some circumstances, TCP packets with bad sequence numbers could be accepted as valid packets. - IO.KIL function for normal TCP ports removed. It turned out that it was very undesirable to process IO.KIL for connected sockets. (A separate function with the same effect does exist.) - Added counted for rejected TCP SYN packets. - Improved task activation code for TCP daemons. HTTP: - Improved logging. MAILD: - Improved new mail notification handling. - Correct handling of EHLO/HELO for SMTP. - Implemented proper MAIL11 protocol, version 3. - Rewritten address rewrite logic to better process both SMTP and MAIL11 addresses. MAIL: - Simple mail client now exist. Libraries: - Unified user lookup functions. User lookups now happen both on lastname, UIC, SID and login directory. This is used both by MAIL, FTP and HTTP. As usual, the distribution is available from: ftp://mim.update.uu.se/bqtcp.dsk ftp://mim.update.uu.se/bqtcp.tap ftp://ftp.update.uu.se/pub/pdp11/rsx/tcpip/tcpip.dsk The documentation is also available through ftp on Mim, or also at http://mim.update.uu.se/tcpipdoc The firewall for Mim have now been removed, so no need for the alternate ports, but Mim is still listening to the alternate ports as well. ftp: 10021 telnet: 10023 Johnny -- Johnny Billquist || "I'm on a bus || on a psychedelic trip email: bqt at softjar.se || Reading murder books pdp is alive! || tryin' to stay hip" - B. Idol Disclaimer The information in this e-mail is confidential and may contain content that is subject to copyright and/or is commercial-in-confidence and is intended only for the use of the above named addressee. If you are not the intended recipient, you are hereby notified that dissemination, copying or use of the information is strictly prohibited. If you have received this e-mail in error, please telephone Fujitsu Australia Limited on 02 9776 4555 or by reply e-mail to the sender and delete the document and all copies thereof. Whereas Fujitsu Australia Limited would not knowingly transmit a virus within an email communication, it is the receiver?s responsibility to scan all communication and any files attached for computer viruses and other defects. Fujitsu Australia Limited does not accept liability for any loss or damage (whether direct, indirect, consequential or economic) however caused, and whether by negligence or otherwise, which may result directly or indirectly from this communication or any files attached. If you do not wish to receive commercial and/or marketing email messages from Fujitsu Australia Limited, please email unsubscribe at au.fujitsu.com. Disclaimer The information in this e-mail is confidential and may contain content that is subject to copyright and/or is commercial-in-confidence and is intended only for the use of the above named addressee. If you are not the intended recipient, you are hereby notified that dissemination, copying or use of the information is strictly prohibited. If you have received this e-mail in error, please telephone Fujitsu Australia Limited on 02 9776 4555 or by reply e-mail to the sender and delete the document and all copies thereof. Whereas Fujitsu Australia Limited would not knowingly transmit a virus within an email communication, it is the receiver?s responsibility to scan all communication and any files attached for computer viruses and other defects. Fujitsu Australia Limited does not accept liability for any loss or damage (whether direct, indirect, consequential or economic) however caused, and whether by negligence or otherwise, which may result directly or indirectly from this communication or any files attached. If you do not wish to receive commercial and/or marketing email messages from Fujitsu Australia Limited, please email unsubscribe at au.fujitsu.com.

Hi Johnny, Is the .tap available? I find this the easiest to get across to the 11/83 from the vax with the tape drive. Best Wishes, Al -----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Johnny Billquist Sent: Sunday, 3 September 2017 8:32 PM To: hecnet at Update.UU.SE; Info-PDP11 at dbit.com; SIMH <simh at trailing-edge.com> Subject: [HECnet] Announcing TCP/IP for RSX-11M-PLUS Time for a new release announcement of TCP/IP for RSX-11M-PLUS. This release contains a lot of fixes and improvements in many areas. I really encourage people to upgrade, as some of these changes can have a noticeable impact on stability. Highlights: - Distribution now includes the PDP-11 C and BASIC+2 resident libraries, so that various tools and utilities that are built against them can be installed even if the full language is not installed on a system. - Improved stability. Detailed information on things that have been done since the last release: Ethernet driver: - The ethernet driver could under some overload situations become deaf, and not receive any more packets. TCP: - TCP FIN handling. Under some circumstances, TCP could get into a state where both sides would be sending FIN packets, and not acknowledging the other sides FIN. - TCP sequence handling. Under some circumstances, TCP packets with bad sequence numbers could be accepted as valid packets. - IO.KIL function for normal TCP ports removed. It turned out that it was very undesirable to process IO.KIL for connected sockets. (A separate function with the same effect does exist.) - Added counted for rejected TCP SYN packets. - Improved task activation code for TCP daemons. HTTP: - Improved logging. MAILD: - Improved new mail notification handling. - Correct handling of EHLO/HELO for SMTP. - Implemented proper MAIL11 protocol, version 3. - Rewritten address rewrite logic to better process both SMTP and MAIL11 addresses. MAIL: - Simple mail client now exist. Libraries: - Unified user lookup functions. User lookups now happen both on lastname, UIC, SID and login directory. This is used both by MAIL, FTP and HTTP. As usual, the distribution is available from: ftp://mim.update.uu.se/bqtcp.dsk ftp://mim.update.uu.se/bqtcp.tap ftp://ftp.update.uu.se/pub/pdp11/rsx/tcpip/tcpip.dsk The documentation is also available through ftp on Mim, or also at http://mim.update.uu.se/tcpipdoc The firewall for Mim have now been removed, so no need for the alternate ports, but Mim is still listening to the alternate ports as well. ftp: 10021 telnet: 10023 Johnny -- Johnny Billquist || "I'm on a bus || on a psychedelic trip email: bqt at softjar.se || Reading murder books pdp is alive! || tryin' to stay hip" - B. Idol Disclaimer The information in this e-mail is confidential and may contain content that is subject to copyright and/or is commercial-in-confidence and is intended only for the use of the above named addressee. If you are not the intended recipient, you are hereby notified that dissemination, copying or use of the information is strictly prohibited. If you have received this e-mail in error, please telephone Fujitsu Australia Limited on 02 9776 4555 or by reply e-mail to the sender and delete the document and all copies thereof. Whereas Fujitsu Australia Limited would not knowingly transmit a virus within an email communication, it is the receiver?s responsibility to scan all communication and any files attached for computer viruses and other defects. Fujitsu Australia Limited does not accept liability for any loss or damage (whether direct, indirect, consequential or economic) however caused, and whether by negligence or otherwise, which may result directly or indirectly from this communication or any files attached. If you do not wish to receive commercial and/or marketing email messages from Fujitsu Australia Limited, please email unsubscribe at au.fujitsu.com.

Ah! I had hopes of writing it out on the VAX. That should work if I set up simh. Will give it a go. Thanks for the guide. Al -----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Johnny Billquist Sent: Monday, September 18, 2017 12:15 PM To: hecnet at Update.UU.SE Subject: Re: [HECnet] Announcing TCP/IP for RSX-11M-PLUS Hi, Alistair. the .tap is available, but it's not something your VAX will understand. The .tap file available is for the RSX virtual file driver. So just fetch it, using ftp on the RSX machine, connect it up, extract the files with BRU, do a IPGEN with just enter on all the questions, and reboot, and voila, you've upgraded... Johnny On 2017-09-18 02:02, Boyanich, Alastair wrote: -- Johnny Billquist || "I'm on a bus || on a psychedelic trip email: bqt at softjar.se || Reading murder books pdp is alive! || tryin' to stay hip" - B. Idol Disclaimer The information in this e-mail is confidential and may contain content that is subject to copyright and/or is commercial-in-confidence and is intended only for the use of the above named addressee. If you are not the intended recipient, you are hereby notified that dissemination, copying or use of the information is strictly prohibited. If you have received this e-mail in error, please telephone Fujitsu Australia Limited on 02 9776 4555 or by reply e-mail to the sender and delete the document and all copies thereof. Whereas Fujitsu Australia Limited would not knowingly transmit a virus within an email communication, it is the receiver?s responsibility to scan all communication and any files attached for computer viruses and other defects. Fujitsu Australia Limited does not accept liability for any loss or damage (whether direct, indirect, consequential or economic) however caused, and whether by negligence or otherwise, which may result directly or indirectly from this communication or any files attached. If you do not wish to receive commercial and/or marketing email messages from Fujitsu Australia Limited, please email unsubscribe at au.fujitsu.com.

Hi, What is the usual way to get around this PAK requirement for DECnet on Ultrix 4.0 VAX? ***************** W A R N I N G ******************** * * * You have NOT registered the DECnet-ULTRIX License !! * * You will not be able to perform any remote access * * through DECnet-ULTRIX. * * * * In order to do remote access, use the lmf utility to * * register a licensed DECnet-ULTRIX PAK. * * * ********************************************************** Thanks, Supratim

It happily registers something called "DRV1W-ULTRIX-VAX" which is probably not DECnet? # lmf list Product Status Users: Total Active DRV1W-ULTRIX-VAX active unlimited ULTRIX active 2 1 On 2017-09-20 18:50, Tony Blews wrote: > um run the .sh first i think. > > On Wed, Sep 20, 2017 at 11:49 PM, <supratim at riseup.net> wrote: > >> Hi, >> >> What is the usual way to get around this PAK requirement for DECnet >> on >> Ultrix 4.0 VAX? >> >> ***************** W A R N I N G ******************** >> * * >> * You have NOT registered the DECnet-ULTRIX License !! * >> * You will not be able to perform any remote access * >> * through DECnet-ULTRIX. * >> * * >> * In order to do remote access, use the lmf utility to * >> * register a licensed DECnet-ULTRIX PAK. * >> * * >> ********************************************************** >> >> Thanks, >> Supratim